Research on the adsorption behavior and corrosion resistance mechanism of Cl ions in aluminum-lithium alloys by pre-deformation

1. Study on the quenching sensitivity of corrosion properties in 7199 aluminum alloy10.1016/j.jmrt.2024.05.012 ↗

2. Effect of different homogenization times on the mechanical properties of 7075 aluminum alloy10.1016/j.jmrt.2024.07.010 ↗

3. Effects of heat treatment on the corrosion behavior and mechanical properties of aluminum alloy 202410.1016/j.jmrt.2023.05.278 ↗

4. Synchronous improvement of mechanical properties and corrosion resistance of novel heat-treatable 5xxx aluminum alloy by non-isothermal ageing10.1016/j.jallcom.2023.168770 ↗

5. Corrosion resistance of zinc-magnesium-aluminium alloy coated steel in marine atmospheric environments10.1016/j.ijoes.2024.100705 ↗

6. Effects of pre-stretch on microstructure, mechanical properties and corrosion resistance of 2A14 aluminum alloy10.1016/S1003-6326(23)66454-4 ↗

7. A mechanistic study on stress corrosion cracking of sensitized AA5083 in a simulated water level fluctuation zone: combined impedance analysis and tensile tests10.1016/j.corsci.2025.112701 ↗

8. Study of electronic properties, mechanical properties and corrosion properties of trace Ce added to Al–Si–Mg–Cu alloys10.1016/j.vacuum.2024.113521 ↗

9. Effect of low-temperature deformation and deep-cryogenic treatment on the mechanical and corrosion resistance of 2050 aluminum-lithium alloy10.1016/j.jallcom.2025.181347 ↗

10. Corrosion fatigue mechanisms and control technologies in aviation aluminum alloys: a critical review10.1016/j.cja.2025.103496 ↗

11. The influence of Zr, Hf, Ti and Sc on the lattice vibration, mechanical, tensile stress-strain, electronic and optical properties of Al4C3 from first-principles calculations10.1016/j.cplett.2025.141935 ↗

12. New insight into the role of Cu addition on surface nanocrystallization and corrosion behavior of aluminum alloy10.1016/j.matlet.2024.136271 ↗

13. Effect and simulation of tensile stress on corrosion behavior of 7050 aluminum alloy in a simulated harsh marine environment10.1016/j.engfailanal.2023.107843 ↗

14. First-principles study on surface corrosion of 6082 aluminum alloy in H+ and Cl− medium10.1016/j.molstruc.2023.136570 ↗

15. The influence of secondary aging on the microstructure and corrosion resistance of Al-Zn-Mg-Cu alloy

16. Phase-field investigation of intergranular corrosion mechanism and kinetics in aluminum alloys10.1016/j.jmrt.2024.05.209 ↗

17. Effect of micron-sized inclusions on the corrosion behavior of recycled Al-Zn-Mg-Cu alloy sheet10.1016/j.matchar.2024.114517 ↗

18. Effect of quenching rate on the corrosion mechanism of coarse grain and fine grain layer in 2195 aluminum-lithium alloy extruded plates10.1016/j.jallcom.2024.175536 ↗

19. Experimental and theoretical study on corrosion mechanism of aluminium alloy in different corrosive solutions10.1016/j.molliq.2024.125894 ↗

20. Study on the effect of aging heat treatment temperature on the microstructure and properties of soluble Al-Zn-Mg-Ga-In-Sn aluminum alloys in solid solution state10.1016/j.jallcom.2024.176048 ↗

21. S. Prathap Singh, M. Gerald Arul Selvan, P. Jose Aloysius, P. Ravichandran, K. Vinoth Babu, Effect of acidic solution and immersion duration on the corrosion behaviour of the aluminium 6061 alloy, Materials Today: Proceedings (2023). Doi: 10.1016/j.matpr.2023.08.232.10.1016/j.matpr.2023.08.232 ↗

22. Effect of non-isothermal aging on mechanical properties, corrosion behavior and microstructure of 7075 aluminum alloy

23. Corrosion behavior of AA5052 aluminum alloy in the presence of heavy metal ions in 3.5% NaCl solution under negative pressure

24. Effect of interrupted aging on mechanical properties and corrosion resistance of 7A75 aluminum alloy10.1016/S1003-6326(24)66550-7 ↗

25. Prediction of corrosion fatigue crack growth rate in aluminum alloys based on incremental learning strategy10.1016/j.ijfatigue.2024.108481 ↗

26. Synergistic effect of Mg addition on the enhancement of the mechanical properties and evaluation of corrosion behaviors in 3.5wt % NaCl of aluminum alloys10.1016/j.heliyon.2024.e25437 ↗

27. Synchronously enhancing the strength, toughness, and stress corrosion resistance of high-end aluminum alloys via interpretable machine learning10.1016/j.actamat.2024.119873 ↗

28. Simultaneous improvement of mechanical strength and corrosion resistance in aluminum alloy 5083 via severe plastic deformation10.1016/j.matchemphys.2023.128755 ↗

29. Influence of retrogression temperature and time on microstructure, mechanical properties and corrosion behaviors of cryogenically-deformed 7A85 aluminum alloy10.1016/S1003-6326(23)66406-4 ↗

30. Tailoring precipitate distribution in, aluminum alloy for improving strength and corrosion resistance

31. Effect of current density on microstructure, mechanical behavior and corrosion resistance of black MAO coating on 6063 aluminum alloy10.1016/j.matchemphys.2024.129800 ↗

32. Effects of pre-strain deep cryogenic aging on the mechanical and corrosion properties of 2A97 aluminum–lithium alloy10.1016/j.jmrt.2024.03.213 ↗

33. Effect of aging temperature on microstructure and corrosion behavior of 6082 aluminum alloy

34. The microstructure and corrosion characteristic of Al-10 wt%RE (Re= Ce, Nd, La, Y) binary aluminum alloys in natural seawater10.1016/j.jmrt.2024.11.007 ↗

35. Controllable precipitation behavior near grain boundaries enabled by artificial strain concentration in age-hardening aluminum alloys10.1016/j.msea.2023.146026 ↗

36. The impact of LSM pretreatment on the growth behavior, electrical insulation and corrosion resistance properties of PEO coating on 6061 aluminum alloy10.1016/j.ceramint.2024.08.484 ↗

37. Microstructural evolution and corrosion mechanism of micro-alloyed 2024 (Zr, Sc, Ag) aluminum alloys10.1016/j.corsci.2023.111476 ↗

38. High temperature corrosion behavior of ADC12 aluminum alloy in oxalic acid solution10.1016/j.corsci.2024.112028 ↗