Direct bonded aluminum on silicon nitride substrates via silver-aluminum interfacial reactions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (60)
Show source-provided references
1. Preparation of Si3N4 ceramics with high thermal conductivity and mechanical properties using novel Gd3Si2C2 as a sintering aid10.1016/j.ceramint.2024.12.425 ↗
2. Low-temperature fabrication of Si3N4 ceramics with high thermal conductivities using a single Mg2Si sintering additive10.1016/j.ceramint.2023.09.293 ↗
3. Thermal and mechanical properties of Si3N4 ceramics obtained via two-step sintering10.1016/j.ceramint.2022.03.088 ↗
4. State of the art of high temperature power electronics10.1016/j.mseb.2010.10.003 ↗
5. Densification, microstructure, thermal and mechanical properties of Si3N4 ceramics: effect of Y2Si4N6C and MgSiN2 content10.1016/j.ceramint.2024.07.215 ↗
6. Design and fabrication of a ceramic substrate-embedded SiC power module10.1109/TCPMT.2025.3538658 ↗
7. Design, analysis, comparison, and experimental validation of insulated metal substrates for high-power wide-bandgap power modules10.1115/1.4047409 ↗
8. Emerging advanced electronic packaging materials for thermal management in power electronics
9. Sintered reaction-bonded silicon nitride ceramics for power-device substrates -review-
10. Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity10.1016/j.ceramint.2018.02.072 ↗
11. A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures10.1016/j.jeurceramsoc.2020.02.016 ↗
12. Investigation of interfacial properties of Ag–Cu/Si3N4 composite ceramic substrates by interface reaction of Si3N4 and CuO10.1016/j.ceramint.2024.05.469 ↗
13. Fabrication of Si3N4/Cu direct-bonded heterogeneous interface assisted by laser irradiation10.1016/j.jmst.2021.05.032 ↗
14. Experimental and first-principles insights into Ti-mediated Cu–Si3N4 interfaces for high-reliability electronic substrates10.1016/j.actamat.2025.121813 ↗
15. Thermal cycling simulation and fatigue lifetime estimation of Si3N4-AMB substrates10.1016/j.mssp.2024.108737 ↗
16. Heat-resistant durability of AMB substrates for SiC power devices: AlN and Si3N4, which one is thermally strong?10.1016/j.microrel.2025.115676 ↗
17. Microstructure and heat transfer characteristics of active brazed Ceramic–Metal joints10.1016/j.ceramint.2021.02.189 ↗
18. Enhanced properties in Si3N4/Cu AMB joints through regulating interfacial reaction modes induced by Mo-particle additives10.1016/j.ceramint.2024.08.248 ↗
19. Nanosecond laser-induced surface modification to strengthen Cu/Si3N4 AMB joints10.1016/j.msea.2022.143573 ↗
20. Interfacial microstructure and properties of Si3N4 Ceramics/Cu/304 stainless steel brazed by Ti40Zr25B0.2Cu amorphous solder10.3390/ma11112226 ↗
21. Active metal brazing of silicon nitride ceramics using a Cu-based alloy and refractory metal interlayers10.1016/j.ceramint.2015.12.087 ↗
22. Research advances in residual thermal stress of ceramic/metal brazes10.1016/j.ceramint.2021.04.220 ↗
23. Active metal brazing of Cu/Si3N4/Cu dissimilar joint using a novel surface hydrogenated Ti foil
24. Microstructure and mechanical strength of the active metal brazed Si3N4/Cu joint with AgCuTi/Cu foam/AgCuTi composite filler10.1007/s40194-025-02027-0 ↗
25. Effect of high temperature cycling on both crack formation in ceramics and delamination of copper layers in silicon nitride active metal brazing substrates10.1016/j.ceramint.2017.01.020 ↗
26. Aluminum alloys for electrical engineering: a review, Springer
27. Electroplated copper additives for advanced packaging: a review10.1021/acsomega.4c01707 ↗
28. Mechanical performances of AlN/Al metallized ceramic substrates fabricated by transient liquid phase bonding and pre-oxidation treatment10.1016/j.ceramint.2022.02.206 ↗
29. Characterization of materials and their interfaces in a direct bonded copper substrate for power electronics applications10.1016/j.microrel.2017.06.001 ↗
30. Effects of large-temperature cycling range on direct bond aluminum substrate10.1109/TDMR.2009.2033668 ↗
31. Thermophysical properties of liquid aluminum10.1007/s11661-017-4053-6 ↗
32. Development of a directly bonded aluminum/alumina power electronic substrate10.1016/S0921-5107(02)00485-3 ↗
33. Aging effect on high heat dissipation DBA and DBAC substrates for high power electronics10.1016/j.ceramint.2022.04.039 ↗
34. Interfacial adhesion and microstructure of thick film metallized aluminum nitride substrates10.1016/S0272-8842(01)00053-0 ↗
35. A review on the wettability and residual stress of AMB AlN/metal joints10.1016/j.mssp.2024.108181 ↗
36. Improved underwater wireless optical communication using a passively mode-locked VECSEL10.1016/j.optcom.2023.129850 ↗
37. Enhanced surface performance of AISI–201 austenitic stainless steel and copper via low–temperature aluminum cathodic cage plasma nitriding10.69626/mse.2025.0207 ↗
38. Direct silver to aluminum solid-state bonding processes10.1016/j.msea.2018.03.011 ↗
39. New solid-state die-attach method using silver foil bonded on aluminum substrate by eutectic reaction10.1016/j.jallcom.2018.09.254 ↗
40. Analyses and design for electrochemical migration suppression by alloying indium into silver10.1007/s10854-018-9520-3 ↗
41. Theoretical investigations on interfacial behavior of Ag–Cu–Ti/Si3N4 wetting system10.1166/jno.2021.3111 ↗
42. Interfacial charge modulation in Bi2WO6/MoS2 heterostructure for chemiresistive H2S detection at ppb-leve
43. Hollow SiO2-supported silver nanoparticles: a high-performance catalyst for reduction of nitroaromatics10.1016/j.inoche.2025.115501 ↗
44. High temperature silver-indium joints manufactured at low temperature10.1016/S0040-6090(00)00727-6 ↗
45. Surface pretreated low-temperature aluminum–aluminum wafer bonding10.1007/s00542-017-3520-8 ↗
46. A novel approach for the removal of oxide film to achieve seamless joining during hot-compression bonding10.1016/j.jmapro.2024.10.027 ↗
47. Hydrogen passivation of impurities in Al2O310.1021/am4057997 ↗
48. Effect of hydrogen on the integrity of aluminium-oxide interface at elevated temperatures
49. Hydrogen induced passivation of Si interfaces by Al2O3 films and SiO2/Al2O3 stacks10.1063/1.3497014 ↗
50. First-principles investigation on stability and mobility of hydrogen in α-Al2O3 (0001)/α-Cr2O3 (0001) interface10.1016/j.fusengdes.2017.05.028 ↗
51. Unravelling the evolution of oxides at the aluminum liquid/vapor interface10.1016/j.actamat.2024.119707 ↗
52. The effect of temperature and sputtered particles on the wettability of Al/Al2O3
53. Aluminum droplets on Ni substrates: evaluating high-temperature oxidation at the liquid/gas interface
54. The influence of thermal residual stresses on mechanical properties of silicon nitride-based composites10.3390/ma13051092 ↗
55. Homogenization of the thermoelastic properties of silicon nitride10.1016/j.actamat.2011.06.011 ↗
56. Thermal expansion of aluminum and some aluminum alloys
57. Thermal expansion coefficient of titanium casting10.1111/j.1365-2842.2001.00664.x ↗
58. W.J. Zhang, B. V Reddy, S.C. Deevi, Physical properties of TiAl-base alloys, 45 (2001) 645–651. Doi: 10.1016/S1359-6462(01)01075-2.10.1016/S1359-6462(01)01075-2 ↗
59. An X-ray determination of the thermal expansion of α-phase Ag–Al alloys at high temperatures10.1107/S0021889886088891 ↗
60. Formation and growth of intermetallic compounds in lead-free solder joints: a review10.3390/ma15041451 ↗