article·2009-01-01

Schottky Barrier Height Extraction in Ohmic Regime: Contacts on Fully Processed GeOI Substrates

Louis Hutin, C. Le Royer, C. Tabone, V. Delaye, F. Nemouchi, F. Aussenac, L. Clavelier, M. Vinet

Publisher page

Abstract

The problematics of contacts optimization on germanium metal-oxide-semiconductor field-effect transistors suffers from a gap between fundamental studies and the structures obtained after full processing. The contact properties of metals on Ge were so far mostly investigated on weakly n-doped samples under the pure thermionic emission regime. These experimental conditions are suitable for an accurate extraction; the measured Schottky barrier height (SBH) being usually large and linked to the interfacial current density by a relatively simple Arrhenius relationship. However, a device-oriented approach would consist in meeting the contact resistivity requirements in the ohmic regime for metallic contacts on a highly doped semiconductor (e.g., doped source and drain) through the choice of metal, interface preparation, and doping conditions. We hereby detail SBH extractions based on contact resistance measurements on highly n- and p-doped Ge, where the predominant tunnel current component results in ohmic behavior. We applied this methodology to our fully processed germanium-on-insulator (GeOI) samples with Ti-based contacts, yielding effective barriers of for electrons and for holes. The method provides a good physical understanding of the technological factors impacting the electrical properties, enabling to define paths toward ohmic-contact optimization in the context of device integration on GeOI.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.