Sol–gel synthesis of 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 lead-free piezoelectric films: effect of pyrolysis temperature on phase evolution and electrical properties
Source abstract
Abstract
Sol–gel processing was applied to fabrication of 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 (BNT–BT6) lead-free ferroelectric thin films on Pt(111)/Ti/SiO2/Si(100) substrates, whose phase structure and electrical properties were found to be greatly affected by the pyrolysis temperature. It was found that a large amount of pyrochlore phase formed in the films if pyrolysis was conducted around 350 °C; pyrolyzing at lower and higher temperatures in the range from 300 to 450 °C could avoid its formation even though other conditions are the same. The reasons are revealed by the DSC and TG experiments conducted in inert gas and air, and a phenomenological model was proposed with a focus on the thermal evolution of carbonaceous in pyrolysis and crystallization process. High-quality BNT–BT6 films with a relatively low surface roughness and a dense cross section were obtained by conducting the pyrolysis at the optimized temperature (400 °C), which also show the best ferroelectric and piezoelectric properties. The effects of pyrolysis temperatures on BNT–BT6 films deposited by the sol–gel technique were investigated. A phenomenological model was built to clarify why phase structures and electrical properties of BNT–BT6 lead-free thin films are greatly affected by pyrolysis temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Smolenskii G, Isupov V, Agranovskaya A et al (1961) Sov Phys Solid State 2:2651–2654
2. Takenaka T, Maruyama K-I, Sakata K (1991) Jpn J Appl Phys 30:223610.1143/JJAP.30.2236 ↗
3. Garg R, Rao BN, Senyshyn A et al (2013) Phys Rev B 88:01410310.1103/PhysRevB.88.014103 ↗
4. Ge W, Devreugd CP, Phelan D et al (2013) Phys Rev B 88:17411510.1103/PhysRevB.88.174115 ↗
5. Shrout TR, Zhang SJ (2007) J Electroceram 19:113–12610.1007/s10832-007-9047-0 ↗
6. Daniels JE, Jo W, Rödel J et al (2009) Appl Phys Lett 95:03290410.1063/1.3182679 ↗
7. Jo W, Dittmer R, Acosta M et al (2012) J Electroceram 29:71–9310.1007/s10832-012-9742-3 ↗
8. Acharya SK, Lee S-K, Hyung J-H et al (2012) J Alloys Compd 540:204–20910.1016/j.jallcom.2012.06.071 ↗
9. Adachi H, Tanaka Y, Harigai T et al (2011) Appl Phys Express 4:05150110.1143/APEX.4.051501 ↗
10. Alonso-Sanjosé D, Jimenez R, Bretos I et al (2009) J Am Ceram Soc 92:2218–222510.1111/j.1551-2916.2009.03229.x ↗
11. Cernea M, Galca AC, Cioangher MC et al (2011) J Mater Sci 46:5621–562710.1007/s10853-011-5512-x ↗
12. Cernea M, Trupina L, Dragoi C et al (2012) J Alloys Compd 515:166–17010.1016/j.jallcom.2011.11.129 ↗
13. Kang DH, Kang YH (2013) J Microelectron Packag Soc 20:25–3010.6117/kmeps.2013.20.4.025 ↗
14. Rémondière F, Malič B, Kosec M et al (2007) J Eur Ceram Soc 27:4363–436610.1016/j.jeurceramsoc.2007.02.208 ↗
15. Scarisoreanu N, Dinescu M, Craciun F et al (2006) Appl Surf Sci 252:4553–455710.1016/j.apsusc.2005.07.140 ↗
16. Tanaka Y, Harigai T, Adachi H et al (2013) Appl Phys Lett 102:19290110.1063/1.4804135 ↗
17. Remondiere F, Malič B, Kosec M et al (2008) J Sol-Gel Sci Technol 46:117–12510.1007/s10971-008-1717-0 ↗
18. Cernea M, Trupina L, Dragoi C et al (2012) J Mater Sci 47:6966–697110.1007/s10853-012-6646-1 ↗
19. Wu Y, Wang X, Zhong C et al (2011) Thin Solid Films 519:4798–480310.1016/j.tsf.2011.01.077 ↗
20. Liu X, Zheng X, Liu J et al (2012) J Electroceram 29:270–27610.1007/s10832-012-9771-y ↗
21. Gong W, Li J-F, Chu X et al (2004) J Eur Ceram Soc 24:2977–298210.1016/j.jeurceramsoc.2003.10.007 ↗
22. Lai F, Li J-F (2007) J Sol-Gel Sci Technol 42:287–29210.1007/s10971-007-0741-9 ↗
23. Law C, Tong K, Li J et al (1998) Thin Solid Films 335:220–22410.1016/S0040-6090(98)00813-X ↗
24. Wang L, Yao K, Goh PC et al (2009) J Mater Res 24:3516–352210.1557/jmr.2009.0433 ↗
25. Nakamizo M, Kammereck R, Walker PL (1974) Carbon 12:259–26710.1016/0008-6223(74)90068-2 ↗
26. Schwan J, Ulrich S, Batori V et al (1996) J Appl Phys 80:440–44710.1063/1.362745 ↗
27. Polli AD, Lange FF (1995) J Am Ceram Soc 78:3401–340410.1111/j.1151-2916.1995.tb07986.x ↗
28. Mantese J, Micheli A, Hamdi A et al (1989) MRS Bull 14:48–5310.1557/S0883769400061492 ↗
29. Esquivel-Elizondo JR, Hinojosa BB, Nino JC (2011) Chem Mater 23:4965–497410.1021/cm202154c ↗