Excellent microwave absorption performance and wideband response of Pr1−xSrxMnO3 powders fabricated by sol–gel technique
Source abstract
Abstract
Confronting with the increased severe electromagnetic waves pollution, synthesis of perovskite-type oxides, like PrMnO3, microwave-absorbing materials with strong reflection loss (RL) and broad effective absorption bandwidth have attracted extensive attention because of their potential application in all kinds of areas. Herein, Pr1−xSrxMnO3 perovskites with different doping Sr-content were synthesized through the sol–gel strategy. The effects of Sr doping on microstructure and magnetic properties was studied by the corresponding equipment, respectively. Microwave absorption properties were investigated according to the transmission line theory. Simulation studies show that Pr0.9Sr0.1MnO3 sample in a wax matrix exhibits the strongest reflection loss of −50.21 dB at 12.08 GHz at a thickness of 2.5 mm. Its effective absorption bandwidth (RL < −10 dB) is up to 10.4 GHz, ranged from 7.6 to 18 GHz with a thickness of 1.9–3.1 mm. Remarkably, the maximum effective bandwidth of Pr0.95Sr0.05MnO3 power can be reached to 6.96 GHz at 2.5 mm. The results suggest that the Sr addition is beneficial to enhance the absorption performances both in wide bandwidth and excellent microwave absorption. This simple synthesis method can be used as major candidate for designing and fabricating ideal microwave absorber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Rostami M, Vahdani MRK, Moradi M (2017) Structural, magnetic, and microwave absorption properties of Mg–Ti–Zr–Co-substituted barium hexaferrites nanoparticles synthesized via sol–gel auto-combustion method. J Sol-Gel Sci Technol 82(3):783–79410.1007/s10971-017-4369-0 ↗
2. Tian C, Yao QR, Tong ZF, Zhou HY, Rao GH, Deng JQ (2020) Effects of Sm-doping on microstructure, magnetic and microwave absorption properties of BiFeO3. J Rare Earths10.1016/j.jre.2020.05.003 ↗
3. Wang Y, Huang Y, Wang QF (2013) Preparation of graphene/BaFe12O19-Ni0.8Zn0.2Fe2O4 nanocomposite and its microwave absorbing properties. J Sol-Gel Sci Technol 67(2):344–35010.1007/s10971-013-3087-5 ↗
4. Kong LB, Li ZW, Liu L, Huang R, Abshinova M, Yang ZH (2013) Recent progress in some composite materials and structures for specific electromagnetic applications. Int Mater Rev 58(4):203–25910.1179/1743280412Y.0000000011 ↗
5. Balci O, Polat EO, Kakenov N, Kocabas C (2015) Graphene-enabled electrically switchable radar-absorbing surfaces. Nat Commun 6(1):6628–663710.1038/ncomms7628 ↗
6. Yang HJ, Cao WQ, Zhang DQ, Su TJ, Shi HL, Wang WZ (2015) NiO hierarchical nanorings on SiC: enhancing relaxation to tune microwave absorption at elevated temperature. ACS Appl Mater Interfaces 7(13):7073–707710.1021/acsami.5b01122 ↗
7. Li Y, Li D, Yang J, Luo H, Chen F, Wang X (2018) Enhanced microwave absorption and surface wave attenuation properties of Co0.5Ni0.5Fe2O4 fibers/reduced graphene oxide composites. Materials 11(4):566–57610.3390/ma11040566 ↗
8. Liu YH, Pan SK, Cheng LC, Yu JJ, Huang L (2020) Effect of misch-metal content on microwave absorption property of Ce2Co17 alloy. J Mater Sci Mater Electron 31(14):11204–1121110.1007/s10854-020-03668-1 ↗
9. Saw AK, Channagoudra G, Hunagund S, Hadimani RL, Dayal V (2020) Study of transport, magnetic and magnetocaloric properties in Sr2+ substituted praseodymium manganite. Mater Res Express 7(1):01610510.1088/2053-1591/ab636d ↗
10. Nakatsugawa H, Saito M, Okamoto Y (2017) High-temperature thermoelectric properties of perovskite-Type Pr0.9Sr0.1Mn1- xFexO3 (0 ≤ x ≤ 1). J Electron Mater 46(5):3262–327210.1007/s11664-017-5366-3 ↗
11. He Y, Pan SK, Luo JL, Chen LC (2018) Effects of Co content on microwave absorbing properties of Dy–Ni powder. Int J Mater Res 109(6):509–51310.3139/146.111633 ↗
12. Zhang SY, Cao QX (2012) Microwave absorption performance of La0.7Sr0.3MnO3 with different sintering temperatures. Adv Mater Res 415:1399–140210.4028/www.scientific.net/AMR.608-609.1399 ↗
13. Sadhu A, Salunke HG, Bhattacharyya S (2017) Coexistence of high magnetization and anisotropy with non-monotonic particle size effect in ferromagnetic PrMnO3 nanoparticles. J Phys Chem C 121:21029–2103610.1021/acs.jpcc.7b07145 ↗
14. Keshvani MJ, Katba S, Jethva S, Udeshi M, Kataria B, Ravalia A, Kuberkar DG (2017) Studies on structural, morphological and electroresistance properties of sol-gel grown nanostructured PrMnO3. Mater Sci Eng B 218:40–5010.1016/j.mseb.2017.02.006 ↗
15. Ran R, Wu XD, Quan CZ, Weng D (2005) Effect of strontium and cerium doping on the structural and catalytic properties of PrMnO3 oxides. Solid State Ion 176:965–97110.1016/j.ssi.2004.11.018 ↗
16. Sajawal A, Ishfaq M, Murtaza G, Habib I, Muhammad N, Sharif S (2018) Half metallic ferromagnetism in PrMnO3 orthorhombic stable phase: an experimental and theoretical investigation. Mater Res Express 5:11610310.1088/2053-1591/aade7d ↗
17. Singh S, Rakesh M (2017) Synthesis and characterisation of PrMn1-XBXO3 (B = Fe, Ni) as catalysts for oxidation of volatile organic compounds. J Inorg Organomet Polym Mater 27:1719–172910.1007/s10904-017-0635-4 ↗
18. Doggali P, Teraoka Y, Rayalu S, Labhsetwar N (2015) Effect of A-site substitution in perovskites: catalytic properties of PrMnO3 and Ba/K/Ce substituted PrMnO3 for CO and PM oxidation. J Environ Chem Eng 3:420–42810.1016/j.jece.2014.11.019 ↗
19. Pan JS, Tong JM, Tian MB (2011) Materials science and engineering. Tsinghua University Press, Beijing
20. Luo JL, Pa SK, Qiao ZQ, Cheng LC, Wang ZZ, Lin PH (2017) Electromagnetic and microwave absorption properties of flaky Nd-Ho-Fe particles. J Mater Sci: Mater Electron 28(21):1–8
21. Wang L, Wang C, Xie H, Zhan W, Guo Y, Guo Y (2018) Catalytic combustion of vinyl chloride over sr doped LaMnO3. Catal Today 327:190–19510.1016/j.cattod.2018.05.005 ↗
22. Vijayasundaram SV, Suresh G, Mondal RA, Kanagaduraia R (2016) Composition-driven enhanced magnetic properties and magnetoelectric coupling in Gd substituted BiFeO3 nanoparticles. J Magn Magn Mater 418:30–3610.1016/j.jmmm.2016.02.048 ↗
23. Dutta DP, Tyagi AK (2018) Effect of Sm3+ and Zr4+ codoping on the magnetic, ferroelectric and magnetodielectric properties of sonochemically synthesized BiFeO3 nanorods. Appl Surf Sci 450:429–43410.1016/j.apsusc.2018.04.202 ↗
24. Wang P, Cheng LF, Zhang YN, Zhang LT (2017) Flexible SiC/Si3N4 composite nanofibers with in situ embedded graphite for highly efficient electromagnetic wave absorption. ACS Appl Mater Interfaces 9:28844–2887710.1021/acsami.7b05382 ↗
25. Liao S. B. (1998) Ferromagnetic Science (Next volume). Science Press, Beijing
26. Xing H, Liu Y, Liu Z, Wang H, Jia H (2018) Structure and microwave absorption properties of polyaniline/Zn ferrite composites. Nano 13(09):1850105–185011710.1142/S1793292018501059 ↗
27. Zhang YL, Wang XX, Cao MS (2018) Confinedly implanted NiFe2O4-rGO: Cluster tailoring and highly tunable electromagnetic properties for selective-frequency microwave absorption. Nano Res 11(3):1426–143610.1007/s12274-017-1758-1 ↗
28. Ma JR, Wang XX, Cao WQ, Han C, Yang HJ, Yuan J (2018) A facile fabrication and highly tunable microwave absorption of 3D flowerlike Co3O4-rGO hybrid-architectures. Chem Eng J 339:487–49810.1016/j.cej.2018.01.152 ↗
29. Rusly SNA, Ismail I, Matori KA, Abbas Z, Shaari AH, Awang Z (2020) Influence of different BFO filler content on microwave absorption performances in BiFeO3/epoxy resin composites. Ceram Inter 46(1):737–74310.1016/j.ceramint.2019.09.027 ↗
30. Wang XX, Ma T, Shu JC, Cao MS (2018) Confinedly tailoring Fe3O4 clusters-NG to tune electromagnetic parameters and microwave absorption with broadened bandwidth. Chem Eng J 332:321–33010.1016/j.cej.2017.09.101 ↗
31. Heidari P, Masoudpanah SM (2020) A facial synthesis of MgFe2O4/RGO nanocomposite powders as a high performance microwave absorber. J Alloy Compd 834:155166–15517410.1016/j.jallcom.2020.155166 ↗
32. Zhang M, Yang HJ, Li Y, Cao WQ, Fang XY, Yuan J et al. (2019) Cobalt doping of bismuth ferrite for matched dielectric and magnetic loss. Appl Phys Lett 115:21290210.1063/1.5134741 ↗
33. Li JS, Lu WB, Suhr J, Chen H, Xiao JQ, Chou TW (2017) Superb electromagnetic wave-absorbing composites based on large-scale graphene and carbon nanotube films. Sci Rep 7(1):2349–235910.1038/s41598-017-02639-7 ↗
34. Li J, Lu W, Suhr J, Chen H, Xiao JQ, Chou TW (2017) Superb electromagnetic wave-absorbing composites based on large-scale graphene and carbon nanotube films. SCI REP-UK 7(1):2349–235510.1038/s41598-017-02639-7 ↗
35. He Y, Pan SK, Yu JJ (2020) Research on magnetic and microwave absorbing properties of Co2Y ferrite fabricated by sol–gel process. J Sol-Gel Sci Technol 96(3):521–52810.1007/s10971-020-05235-w ↗
36. Wang ZJ, Wu LN, Zhou JG, Cai W, Shen BZ, Jiang ZH (2013) Magnetite nanocrystals on multiwalled carbon nanotubes as a synergistic microwave absorber. J Phys Chem C 117(10):5446–545210.1021/jp4000544 ↗
37. Singh K, Ohlan A, Pham VH, Balasubramaniyan R, Varshney S, Jang J (2013) Nanostructured graphene/Fe3O4 incorporated polyaniline as a high performance shield against electromagnetic pollution. Nanoscale 5(6):2411–242010.1039/c3nr33962a ↗
38. Li X, Wang L, You WB, Xing LS, Yu XF, Li YS (2019) Morphology-controlled synthesis and excellent microwave absorption performance of ZnCo2O4 nanostructures via a self-assembly process of flake units. Nanoscale 11:2694–270210.1039/C8NR08601J ↗
39. Huang X, Zhang J, Xiao S, Chen G (2014) The cobalt zinc spinel ferrite nanofiber: lightweight and efficient microwave absorber. J Am Ceram Soc 97(5):1363–136610.1111/jace.12909 ↗
40. Zhao S, Zheng J, Jiang F, Song Y, Sun M, Song X (2015) Co-precipitation synthesis and microwave absorption properties of CaMnO3 doped by La and Co. J Mater Sci: Mater Electron 26(11):8603–8608
41. Liu JL, Zhang P, Zhang XK, Xie QQ, Pan DJ, Zhang J (2017) Synthesis and microwave absorbing properties of La-doped Sr-hexaferrite nanopowders via sol–gel auto-combustion method. Rare Met 36(009):704–71010.1007/s12598-015-0671-6 ↗
42. Yang ZN, Luo F, Xu JS, Zhou WC, Zhu DM (2016) Dielectric and microwave absorption properties of LaSrMnO3/Al2O3 ceramic coatings fabricated by atmospheric plasma spraying. J Alloy Compd 662:607–61110.1016/j.jallcom.2015.12.113 ↗
43. Yan KL, Yin F, Pang C, Zuo XH, Zhang QT, Shen LM (2019) Broadband microwave absorber constructed by reduced graphene oxide/La0.7Sr0.3MnO3 composites. RSC Adv 9:41817–4182310.1039/C9RA09474A ↗