Sol–gel synthesized siloxane hybrid materials for display and optoelectronic applications
Source abstract
Abstract
Recently, displays and optoelectronics have made remarkable development because they are the most frequently exposed applications to humanity. The pixel size has become smaller and a new form factor is needed for displays and optoelectronics beyond rigid ones. New material breakthroughs enabling new form factors with plastic-like flexibility, mechanical toughness as well as glass-like thermal/mechanical resistance and low thermal expansion are required. Sol–gel-derived siloxane hybrid material (Hybrimer), showing synergetic properties of organic and inorganic (O–I) materials, can be realized by chemical hybridization and dense O–I co-networks. In addition, the characteristics of hybrimer can be easily optimized via control of organic functional groups, sol–gel reaction, and polymerization steps. First, a sol–gel reaction and polymerization, which enables chemical hybridization of O–I groups, are introduced. Then, the various display and optoelectronic applications using hybrimer achieved by control of properties are provided: (i) patterning, (ii) passivation, (iii) glass-fabric reinforced film, and (iv) color conversion films. This paper includes a brief overview of fabrication process and applications using hybrimer developed over the past decades.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Advanced Sensor and Energy Harvesting Materials · Luminescence and Fluorescent Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Huitema E (2012) The future of displays is foldable. Inf Disp (1975) 28:6–10
2. Cima MJ (2014) Next-generation wearable electronics. Nat Biotechnol 32:642–64310.1038/nbt.2952 ↗
3. Roberts JA, Yaya LHP, Manolis C (2014) The invisible addiction: cell-phone activities and addiction among male and female college students. J Behav Addict 3:254–26510.1556/JBA.3.2014.015 ↗
4. Seong J, Jang J, Lee J, Lee M (2020) CMOS backplane pixel circuit with leakage and voltage drop compensation for an micro-LED display achieving 5000 PPI or higher. IEEE Access 8:49467–4947610.1109/ACCESS.2020.2979883 ↗
5. Lim HR, Kim HS, Qazi R et al. (2020) Advanced soft materials, sensor integrations, and applications of wearable flexible hybrid electronics in healthcare, energy, and environment. Adv Mater 32:1–43
6. Nishimura J, Hara K, Daitoh T et al. (2020) 3‐1: Invited paper: super bright 8K LCD with 10,000 nit realized by excellent light‐resistance characteristics of IGZO TFT backplane. SID Symp Dig Tech Pap 51:1–410.1002/sdtp.13790 ↗
7. Monickam S, Newman T, Szychowski B et al. (2020) 8‐2: invited paper: high refractive index materials for display and lighting applications. SID Symp Dig Tech Pap 51:86–8910.1002/sdtp.13811 ↗
8. Liu W, Linjia M, Aichen X et al. (2020) 17‐6: invited paper: 4K HDR “Stacked‐Panel” TV based on dual‐cell LCD. SID Symp Dig Tech Pap 51:243–24510.1002/sdtp.13849 ↗
9. Crawford GP (2005) Flexible flat panel displays. John Wiley & Sons, Ltd, Chichester, UK10.1002/0470870508 ↗
10. Mauro JC (2014) Grand challenges in glass science. Front Mater 1:2010.3389/fmats.2014.00020 ↗
11. Mauro JC, Philip CS, Vaughn DJ, Pambianchi MS (2014) Glass science in the United States: current status and future directions. Int J Appl Glas Sci 5:2–1510.1111/ijag.12058 ↗
12. Kaltenbrunner M, Sekitani T, Reeder J et al. (2013) An ultra-lightweight design for imperceptible plastic electronics. Nature 499:458–46310.1038/nature12314 ↗
13. Sekitani T, Zschieschang U, Klauk H, Someya T (2010) Flexible organic transistors and circuits with extreme bending stability. Nat Mater 9:1015–102210.1038/nmat2896 ↗
14. Choi MC, Kim Y, Ha CS (2008) Polymers for flexible displays: from material selection to device applications. Prog Polym Sci 33:581–63010.1016/j.progpolymsci.2007.11.004 ↗
15. Sanchez C, Arribart H, Guille MMG (2005) Biomimetism and bioinspiration as tools for the design of innovative materials and systems. Nat Mater 4:277–28810.1038/nmat1339 ↗
16. Ritchie RO (2011) The conflicts between strength and toughness. Nat Mater 10:817–82210.1038/nmat3115 ↗
17. Kang ES, Bae JY, Bae BS (2003) Measurement of thermo-optic coefficients in sol-gel hybrid glass films. J Sol-Gel Sci Technol 26:981–98410.1023/A:1020761430016 ↗
18. Yang S, Kim J-S, Jin J et al. (2010) Thermal resistance of cycloaliphatic epoxy hybrimer based on sol-gel derived oligosiloxane for LED encapsulation. J Appl Polym Sci 117:2140–214510.1002/app.31702 ↗
19. Buestrich R, Kahlenberg F, Popall M et al. (2001) ORMOCERs for optical interconnection technology. J Sol-Gel Sci Technol 20:181–18610.1023/A:1008755607488 ↗
20. Haas KH, Wolter H (1999) Synthesis, properties and applications of inorganic-organic copolymers (ORMOCER®s). Curr Opin Solid State Mater Sci 4:571–58010.1016/S1359-0286(00)00009-7 ↗
21. Park OH, Kim SJ, Bae BS (2004) Photochemical reactions in fluorinated sol-gel hybrid materials doped with a photolocking agent for direct micropatterning. J Mater Chem 14:1749–175310.1039/B403026E ↗
22. Kim WS, Yoon KB, Bae BS (2005) Nanopatterning of photonic crystals with a photocurable silica-titania organic-inorganic hybrid material by a UV-based nanoimprint technique. J Mater Chem 15:4535–453910.1039/b509622g ↗
23. Kim YH, Bae JY, Jin J, Bae BS (2014) Sol-gel derived transparent zirconium-phenyl siloxane hybrid for robust high refractive index LED encapsulant. ACS Appl Mater Interfaces 6:3115–312110.1021/am500315y ↗
24. Lee I, Ho Kim Y, Jang J et al. (2020) Solution-processed, photo-patternable fluorinated sol-gel hybrid materials as a bio-fluidic barrier for flexible electronic systems. Adv Electron Mater 6:190106510.1002/aelm.201901065 ↗
25. Choi G-M, Jin J, Shin D et al. (2017) Flexible hard coating: glass-like wear resistant, yet plastic-like compliant, transparent protective coating for foldable displays. Adv Mater 29:170020510.1002/adma.201700205 ↗
26. Jin J, Ko JH, Yang S, Bae BS (2010) Rollable transparent glass-fabric reinforced composite substrate for flexible devices. Adv Mater 22:4510–451510.1002/adma.201002198 ↗
27. Park J, Hyun BG, An BW et al. (2017) Flexible transparent conductive films with high performance and reliability using hybrid structures of continuous metal nanofiber networks for flexible optoelectronics. ACS Appl Mater Interfaces 9:20299–2030510.1021/acsami.7b04314 ↗
28. Lee H, Lee HE, Wang HS et al. (2020) Hierarchically surface-textured ultrastable hybrid film for large-scale triboelectric nanogenerators. Adv Funct Mater 30:200561010.1002/adfm.202005610 ↗
29. Kim YH, Lee H, Kang SM, Bae BS (2019) Two-step-enhanced stability of quantum dots via silica and siloxane encapsulation for the long-term operation of light-emitting diodes. ACS Appl Mater Interfaces 11:22801–2280810.1021/acsami.9b06987 ↗
30. Kuk SK, Jang J, Han HJ et al. (2019) Siloxane-encapsulated upconversion nanoparticle hybrid composite with highly stable photoluminescence against heat and moisture. ACS Appl Mater Interfaces 11:15952–1595910.1021/acsami.8b20782 ↗
31. Kim YH, Koh S, Lee H et al. (2020) Photo-patternable quantum dots/siloxane composite with long-term stability for quantum dot color filters. ACS Appl Mater Interfaces 12:3961–396810.1021/acsami.9b19586 ↗
32. Kang E-S, Park J-U, Bae B-S (2003) Effect of organic modifiers on the thermo-optic characteristics of inorganic-organic hybrid material films. J Mater Res 18:1889–189410.1557/JMR.2003.0264 ↗
33. Kim YH, Choi GM, Kim YH, Bae BS (2019) Mechanically improved sol-gel derived methacrylate-siloxane hybrid materials with urethane linkage. J Sol-Gel Sci Technol 89:111–11910.1007/s10971-018-4803-y ↗
34. Kim YH, Choi GM, Shin D et al. (2018) Transparent urethane-siloxane hybrid materials for flexible cover windows with ceramic-like strength, yet polymer-like modulus. ACS Appl Mater Interfaces 10:43122–4313010.1021/acsami.8b18141 ↗
35. Kim YH, Choi G-M, Bae J et al. (2018) High-performance and simply-synthesized ladder-like structured methacrylate siloxane hybrid material for flexible hard coating. Polym (Basel) 10:44910.3390/polym10040449 ↗
36. Jin J, Yang S, Bae BS (2012) Fabrication of a high thermal-stable methacrylate-silicate hybrid nanocomposite: Hydrolytic versus non-hydrolytic sol-gel synthesis of methacryl-oligosiloxanes. J Sol-Gel Sci Technol 61:321–32710.1007/s10971-011-2630-5 ↗
37. Brinker CJ, Scherer GW (1990) Sol-gel science: the physics and chemistry of sol-gel processing. Academic press, San Diego, p. 9610.1016/B978-0-08-057103-4.50008-8 ↗
38. Sassi Z, Bureau JC, Bakkali A (2002) Spectroscopic study of TMOS-TMSM-MMA gels: Previously identification of the networks inside the hybrid material. Vib Spectrosc 28:299–31810.1016/S0924-2031(02)00009-7 ↗
39. Pierre AC (1998) Introduction to sol-gel processing. Springer US, Boston, MA10.1007/978-1-4615-5659-6 ↗
40. Styskalik A, Skoda D, Barnes C, Pinkas J (2017) The power of non-hydrolytic sol-gel chemistry: a review. Catalysts 7:16810.3390/catal7060168 ↗
41. Kim JS, Yang SC, Kwak SY et al. (2012) High performance encapsulant for light-emitting diodes (LEDs) by a sol-gel derived hydrogen siloxane hybrid. J Mater Chem 22:7954–796010.1039/c2jm16907j ↗
42. Lee TH, Kim JH, Bae BS (2006) Synthesis of colorless imide hybrid nanocomposites using amine functionalized oligosiloxane nano-building clusters. J Mater Chem 16:1657–166410.1039/b518034a ↗
43. Kim YH, Lee H, Kang S-M et al. (2020) Long-term stable microlens array-integrated quantum dot/siloxane film for thin white backlight units. ACS Appl Nano Mater 3:10261–1026910.1021/acsanm.0c02195 ↗
44. Kim H, Bae J, Kim YH et al. (2014) Low temperature curable epoxy siloxane hybrid materials for LED encapsulant. J Appl Polym Sci 131:3996810.1002/app.39968 ↗
45. Yang S, Kwak SY, Jin J, Bae BS (2009) Highly condensed epoxy-oligosiloxane-based hybrid material for transparent low- k dielectric coatings. ACS Appl Mater Interfaces 1:1585–159010.1021/am900252v ↗
46. Kim JS, Lee S, Hwang YH et al. (2012) Photo-curable sol-gel hybrid film as a dielectric layer by a thiol-ene reaction in air or N 2 for organic thin film transistors. Electrochem Solid-State Lett 15:G1310.1149/2.021205esl ↗
47. Kim YH, Lim YW, Kim YH, Bae BS (2016) Thermally stable siloxane hybrid matrix with low dielectric loss for copper-clad laminates for high-frequency applications. ACS Appl Mater Interfaces 8:8335–834010.1021/acsami.6b01497 ↗
48. Bae JY, Kim YH, Kim HY et al. (2013) Sol-gel synthesized linear oligosiloxane-based hybrid material for a thermally-resistant light emitting diode (LED) encapsulant. RSC Adv 3:8871–887710.1039/c3ra41478g ↗
49. Kim JS, Yang SC, Park HJ, Bae BS (2011) Photo-curable siloxane hybrid material fabricated by a thiol–ene reaction of sol–gel synthesized oligosiloxanes. Chem Commun 47:6051–605310.1039/c1cc11297j ↗
50. Phillips R (1984) Photopolymerization. J Photochem 25:79–8210.1016/0047-2670(84)85016-9 ↗
51. Crivello JV, Reichmanis E (2014) Photopolymer materials and processes for advanced technologies. Chem Mater 26:533–54810.1021/cm402262g ↗
52. Ligon SC, Husár B, Wutzel H et al. (2014) Strategies to reduce oxygen inhibition in photoinduced polymerization. Chem Rev 114:577–58910.1021/cr3005197 ↗
53. Kim J-S, Kim Y, Ko J-H, Bae B-S (2013) Thiol-Ene reaction derived sol-gel hybrid dielectric layer for oragnic thin film transistors. ECS Trans 50:83–8810.1149/05004.0083ecst ↗
54. Penczek S, Cypryk M, Duda A et al. (2007) Living ring-opening polymerizations of heterocyclic monomers. Prog Polym Sci 32:247–28210.1016/j.progpolymsci.2007.01.002 ↗
55. Crivello JV, Malik R (1997) Synthesis and photoinitiated cationic polymerization of monomers with the silsesquioxane core. J Polym Sci Part A Polym Chem 35:407–42510.1002/(SICI)1099-0518(199702)35:3<407::AID-POLA3>3.0.CO;2-P ↗
56. Warley RL, Feke DL, Manas-Zloczower I (2005) Effect of peroxide crosslinking on the dynamic modulus of silicone rubber. J Appl Polym Sci 97:1504–151210.1002/app.21903 ↗
57. Bae JY, Jang J, Bae BS (2017) Transparent, thermally stable methyl siloxane hybrid materials using sol-gel synthesized vinyl-methyl oligosiloxane resin. J Sol-Gel Sci Technol 82:253–26010.1007/s10971-016-4262-2 ↗
58. Yang S, Kim J-S, Jin J et al. (2011) Cycloaliphatic epoxy oligosiloxane-derived hybrid materials for a high-refractive index LED encapsulant. J Appl Polym Sci 122:2478–248510.1002/app.34375 ↗
59. Kim WS, Lee JH, Shin SY et al. (2004) Fabrication of ridge waveguides by UV embossing and stamping of sol-gel hybrid materials. IEEE Photonics Technol Lett 16:1888–189010.1109/LPT.2004.831053 ↗
60. Ko YH, Prabhakaran P, Choi S et al. (2020) Environmentally friendly quantum-dot color filters for ultra-high-definition liquid crystal displays. Sci Rep. 10:1581710.1038/s41598-020-72468-8 ↗
61. Il KimT, Kim RH, Rogers JA (2012) Microscale inorganic light-emitting diodes on flexible and stretchable substrates. IEEE Photonics J 4:607–61210.1109/JPHOT.2012.2188998 ↗
62. Jiang H (2013) Nitride microLEDs and beyond - a decade progress review. Opt Express 21:A475–A48410.1364/OE.21.00A475 ↗
63. Kim WS, Kim KS, Kim YC, Bae BS (2005) Thermowetting embossing nanoimprinting of the organic-inorganic hybrid materials. Thin Solid Films 476:181–18410.1016/j.tsf.2004.09.026 ↗
64. Ovsianikov A, Viertl J, Chichkov B et al. (2008) Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication. ACS Nano 2:2257–226210.1021/nn800451w ↗
65. Usui M, Hikita M, Yoshimura R, et al (1998) An optical coupling technique for parallel optical interconnection modules using polymeric optical waveguide films. In: 2nd 1998 IEMT/IMC Symposium. Institute of Electrical and Electronics Engineers Inc., pp 127–13210.1109/IEMTIM.1998.704538 ↗
66. Chandross EA, Pryde CA, Tomlinson WJ, Weber HP (1974) Photolocking-A new technique for fabricating optical waveguide circuits. Appl Phys Lett 24:72–7410.1063/1.1655099 ↗
67. Uchimura H, Takenoshita T, Fujii M (1998) Development of a “laminated waveguide.”. IEEE Trans Micro Theory Tech 46:2438–244310.1109/22.739232 ↗
68. Bae BS, Park OH, Charters R et al. (2001) Direct laser writing of self-developed waveguides in benzyldimethylketal-doped sol-gel hybrid glass. J Mater Res 16:3184–318710.1557/JMR.2001.0439 ↗
69. Bae BS (2004) High photosensitive sol-gel hybrid materials for direct photo-imprinting of micro-optics. J Sol-Gel Sci Technol 31:309–31510.1023/B:JSST.0000048009.47025.6e ↗
70. Jung JI, Park OH, Bae BS (2003) Fabrication of channel waveguides by photochemical self-developing in doped sol-gel hybrid glass. J Sol-Gel Sci Technol 26:897–90110.1023/A:1020728522747 ↗
71. Kim WS, Kim KS, Eo YJ et al. (2005) Synthesis of fluorinated hybrid material for UV embossing of a large core optical waveguide structure. J Mater Chem 15:465–46910.1039/b412419g ↗
72. Kim WS, Choi DG, Bae BS (2006) Ultraviolet-nanoimprint of 40 nm scale patterns using functionally modified fluorinated hybrid materials. Nanotechnology 17:3319–332410.1088/0957-4484/17/13/040 ↗
73. Park JU, Kim WS, Bae BS (2003) Photoinduced low refractive index in a photosensitive organic-inorganic hybrid material. J Mater Chem 13:738–74110.1039/b211094f ↗
74. Jung KH, Bae BS (2008) Synthesis and characterization of photopatternable epoxy hybrid materials for the fabrication of thick and thermally stable microstructures with a high aspect ratio. J Appl Polym Sci 108:3169–317610.1002/app.27966 ↗
75. Patel P (2011) Solid-state lighting: the future looks bright. MRS Bull 36:678–68010.1557/mrs.2011.215 ↗
76. Matyba P, Yamaguchi H, Chhowalla M et al. (2011) Flexible and metal-free light-emitting electrochemical cells based on graphene and PEDOT-PSS as the electrode materials. ACS Nano 5:574–58010.1021/nn102704h ↗
77. Tao P, Li Y, Siegel RW, Schadler LS (2013) Transparent dispensible high-refractive index ZrO2/epoxy nanocomposites for LED encapsulation. J Appl Polym Sci 130:3785–379310.1002/app.39652 ↗
78. Narendran N, Gu Y, Freyssinier JP et al. (2004) Solid-state lighting: failure analysis of white LEDs. J Cryst Growth 268:449–45610.1016/j.jcrysgro.2004.04.071 ↗
79. Narendran N, Gu Y (2005) Life of LED-based white light sources. J Disp Technol 1:167–17110.1109/JDT.2005.852510 ↗
80. Chhajed S, Lee W, Cho J et al. (2011) Strong light extraction enhancement in GaInN light-emitting diodes by using self-organized nanoscale patterning of p -type GaN. Appl Phys Lett 98:07110210.1063/1.3554426 ↗
81. Yang S, Kwak SY, Jin J et al. (2012) Thermally resistant UV-curable epoxy-siloxane hybrid materials for light emitting diode (LED) encapsulation. J Mater Chem 22:8874–888010.1039/c2jm16355a ↗
82. Kim JS, Yang S, Bae BS (2010) Thermally stable transparent sol-gel based siloxane hybrid material with high refractive index for light emitting diode (LED) encapsulation. Chem Mater 22:3549–355510.1021/cm100903b ↗
83. Würtele MA, Kolbe T, Lipsz M et al. (2011) Application of GaN-based ultraviolet-C light emitting diodes - UV LEDs - for water disinfection. Water Res 45:1481–148910.1016/j.watres.2010.11.015 ↗
84. Asif Khan M (2006) AlGaN multiple quantum well based deep UV LEDs and their applications. Phys status solidi 203:1764–177010.1002/pssa.200565427 ↗
85. Shatalov M, Jain R, Saxena T et al. (2017) Development of deep UV LEDs and current problems in material and device technology. Semicond Semimet 96:45–8310.1016/bs.semsem.2016.08.002 ↗
86. Huang W, Zhang Y, Yu N, Yuan Y (2007) Studies on UV-stable silicone-epoxy resins. J Appl Polym Sci 104:3954–395910.1002/app.26188 ↗
87. NAKAMURA N, SEKINE M, MATSUMOTO S et al. (2008) Optical characteristics of spherical glass encapsulated LEDs. J Ceram Soc Jpn 116:1075–107810.2109/jcersj2.116.1075 ↗
88. Bae JY, Kim YH, Kim HY et al. (2015) Ultraviolet light stable and transparent sol-gel methyl siloxane hybrid material for UV Light-Emitting Diode (UV LED) encapsulant. ACS Appl Mater Interfaces 7:1035–103910.1021/am507132a ↗
89. Bae JY, Kim HY, Lim YW et al. (2016) Optically recoverable, deep ultraviolet (UV) stable and transparent sol-gel fluoro siloxane hybrid material for a UV LED encapsulant. RSC Adv 6:26826–2683410.1039/C6RA01346E ↗
90. Rathore JS, Interrante LV, Dubois G (2008) Ultra low- k films derived from hyperbranched polycarbosilanes (HBPCS). Adv Funct Mater 18:4022–402810.1002/adfm.200801197 ↗
91. Lee B, Park YH, Hwang YT et al. (2005) Ultralow-k nanoporous organosilicate dielectric films imprinted with dendritic spheres. Nat Mater 4:147–15110.1038/nmat1291 ↗
92. Lee HJ, Lin EK, Wang H et al. (2002) Structural comparison of hydrogen silsesquioxane based porous low-k thin films prepared with varying process conditions. Chem Mater 14:1845–185210.1021/cm011569h ↗
93. Matsumura H (1989) Silicon nitride produced by catalytic chemical vapor deposition method. J Appl Phys 66:3612–361710.1063/1.344068 ↗
94. Oh JH, Kwak SY, Yang SC, Bae BS (2010) Highly condensed fluorinated methacrylate hybrid material for transparent low- k passivation layer in LCD-TFT. ACS Appl Mater Interfaces 2:913–91810.1021/am9008677 ↗
95. Li Y, Meng L, Yang Y et al. (2016) High-efficiency robust perovskite solar cells on ultrathin flexible substrates. Nat Commun 7:1021410.1038/ncomms10214 ↗
96. Sampath S, Ramachandra GS (2008) Effects of glass fibers on light transmittance and color of fiber-reinforced composite. Dent Mater 24:34–3810.1016/j.dental.2006.12.010 ↗
97. Dangtungee R, Somchua S, Siengchin S (2012) Recycling glass fiber/epoxy resin of waste printed circuit boards: Morphology and mechanical properties. Mech Compos Mater 48:325–33010.1007/s11029-012-9279-1 ↗
98. Jin J, Lee J, Jeong S et al. (2013) High-performance hybrid plastic films: a robust electrode platform for thin-film optoelectronics. Energy Environ Sci 6:1811–181710.1039/c3ee24306k ↗
99. Im HG, Jung SH, Jin J et al. (2014) Flexible transparent conducting hybrid film using a surface-embedded copper nanowire network: A highly oxidation-resistant copper nanowire electrode for flexible optoelectronics. ACS Nano 8:10973–1097910.1021/nn504883m ↗
100. Im HG, An BW, Jin J et al. (2016) A high-performance, flexible and robust metal nanotrough-embedded transparent conducting film for wearable touch screen panels. Nanoscale 8:3916–392210.1039/C5NR07657A ↗