journal article·2026-10Open access

Ru–Ni co-exsolution from B-site excessive proton-conducting perovskite for durable anode catalytic layers in direct ammonia PCFCs

Tianjiu Zhu, Desheng Feng, Zhixin Luo, Zehua Wang, Zongping Shao, Zhonghua Zhu, Lei Ge

Abstract

Direct ammonia protonic ceramic fuel cells (DAPCFCs) offer a promising pathway for efficient power generation, owing to the high energy density, ease of storage, and enhanced safety of ammonia compared to hydrogen. However, their practical application is limited by poor durability, particularly at intermediate temperatures below 600 °C. To address this challenge, we design a Ru and Ni co-doped B-site-excessive proton-conducting perovskite BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 Ru 0.02 Ni 0.05 O 3-δ (R2N5), as a robust anode catalyst layer (ACL) material for DAPCFCs. Under high-temperature reducing conditions, Ru and Ni are reduced and exsolved from the perovskite lattice to form nanoparticles separately, effectively catalyzing ammonia decomposition at intermediate temperatures. When incorporated into a single PCFC cell operating under ammonia fuel, the cell with ACL shows a 34% enhancement in the power output at 550 °C compared to the reference cell. The cell also exhibited excellent durability, with 8% voltage degradation over 350 h of continuous operation in ammonia, compared to 18.2% degradation within 100 h for the reference cell. Post-test analysis revealed that the R2N5 ACL mitigated Ni coarsening and agglomeration in the anode, contributing to the improved performance and lifetime of the DAPCFC. This work demonstrates a rational strategy to overcome the durability bottleneck of DAPCFCs by engineering multifunctional, exsolution-enabled ACLs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ammonia Synthesis and Nitrogen Reduction · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
2. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2–xYbxO3–δ10.1126/science.1174811 ↗
3. New understanding and improvement in sintering behavior of cerium-rich perovskite-type protonic electrolytes10.1002/adfm.202402716 ↗
4. Fine-tuning thermal expansion characteristics of solid oxide fuel cell cathode via composite cathode fabrication10.1016/j.jpowsour.2024.235143 ↗
5. Selective in situ phase segregation enabling efficient and stable protonic ceramic fuel cell cathode performance
6. Prediction of perovskite oxygen vacancies for oxygen electrocatalysis at different temperatures10.1038/s41467-024-53578-7 ↗
7. Progress in understanding triple ionic–electronic conduction in perovskite oxides for protonic ceramic fuel cell applications10.1039/D4NR05513F ↗
8. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
9. In situ formation of a melt-solid interface toward stable oxygen reduction in protonic ceramic fuel cells10.1002/adfm.202417425 ↗
10. First observation of electrode-correlated protonic conductivity of perovskite-type electrolytes and way towards optimization10.1039/D4EE00688G ↗
11. Data-driven insights into protonic-ceramic fuel cell and electrolysis performance10.1039/D4TA08326A ↗
12. Hydrogen storage for mobility: a review10.3390/ma12121973 ↗
13. Advances in power generation from ammonia via electrocatalytic oxidation in direct ammonia fuel cells10.1016/j.cej.2024.150896 ↗
14. Ammonia for power10.1016/j.pecs.2018.07.001 ↗
15. Development of Ni–Ba(Zr,Y)O3 cermet anodes for direct ammonia-fueled solid oxide fuel cells10.1016/j.jpowsour.2017.08.085 ↗
16. Facilitated ammonia decomposition and enhanced hydrogen diffusion in 10Ni-Ce0.8Zr0.2O2 as anode catalytic functional layer for low-temperature direct ammonia fuel cells10.1016/j.cej.2024.158976 ↗
17. A stability study of Ni/Yttria-stabilized zirconia anode for direct ammonia solid oxide fuel cells10.1021/acsami.5b11122 ↗
18. Ammonia-fed reversible protonic ceramic fuel cells with Ru-based catalyst10.1038/s42004-021-00559-2 ↗
19. Redesigning protonic ceramic electrochemical cells to lower the operating temperature10.1126/sciadv.adq2507 ↗
20. An active and durable ammonia cracking layer for direct ammonia protonic ceramic fuel cells10.1016/j.mtcata.2024.100072 ↗
21. K and Mg Co-doped perovskite oxide for enhanced anode of direct ammonia protonic ceramic fuel cell10.1016/j.ijhydene.2024.09.186 ↗
22. In situ exsolved CoFeRu alloy decorated perovskite as an anode catalyst layer for high-performance direct-ammonia protonic ceramic fuel cells10.1002/adfm.202408756 ↗
23. A high-performance and durable direct NH3 tubular protonic ceramic fuel cell integrated with an internal catalyst layer10.1016/j.apcatb.2022.121071 ↗
24. Self-construction of efficient interfaces ensures high-performance direct ammonia protonic ceramic fuel cells10.1002/adma.202304957 ↗
25. A new Pd doped proton conducting perovskite oxide with multiple functionalities for efficient and stable power generation from ammonia at reduced temperatures
26. Boosting ammonia-fueled protonic ceramic fuel cells with RuFe nanoparticle exsolution: enhanced performance via secondary redox treatment10.1002/adfm.202420214 ↗
27. Catalytic influence of oxide component in Ni-Based cermet anodes for ammonia-fueled solid oxide fuel cells10.1002/fuce.201400135 ↗
28. Impact of the ammonia decomposition reaction over an anode on direct ammonia-fueled protonic ceramic fuel cells10.1039/D0SE00841A ↗
29. Improving the catalytic activity and sintering resistance of Ni-BaCe0.7Zr0.1Y0.1Yb0.1O3−δ cermet anode for ammonia-fueled protonic ceramic fuel cells via cobalt addition10.1016/j.cej.2025.160757 ↗
30. A comprehensive investigation of direct ammonia-fueled thin-film solid-oxide fuel cells: performance, limitation, and prospects10.1016/j.isci.2022.105009 ↗
31. Nanoparticle exsolution on perovskite oxides: insights into mechanism, characteristics and novel strategies10.1007/s40820-023-01258-4 ↗
32. Exsolution of Ru nanoparticles on BaCe0.9Y0.1O3-δ modifying geometry and electronic structure of Ru for ammonia synthesis reaction under mild conditions10.1002/smll.202205424 ↗
33. A new durable surface nanoparticles-modified perovskite cathode for protonic ceramic fuel cells from selective cation exsolution under oxidizing atmosphere10.1002/adma.202106379 ↗
34. A priori catalytic activity correlations: the difficult case of hydrogen production from ammonia10.1023/B:CATL.0000030108.50691.d4 ↗
35. Review on Ru-Based and Ni-Based catalysts for ammonia decomposition: research status, reaction mechanism, and perspectives10.1021/acs.energyfuels.3c00804 ↗
36. Microscopic insight into ruthenium exsolution from LaFe0.9Ru0.1O3 perovskite10.1021/acs.chemmater.4c01084 ↗
37. Ru/Nb co-doped perovskite anode: achieving good coking resistance in hydrocarbon fuels via core-shell nanocatalysts exsolution10.1016/j.apcatb.2021.120613 ↗
38. One-step synthesis of Ni/Yttrium-doped barium zirconates catalyst for on-site hydrogen production from NH3 decomposition10.1016/j.ijhydene.2021.10.187 ↗
39. Self-assembled CoFeNi alloy-based perovskite oxide as the catalyst layer for stable direct ammonia protonic ceramic fuel cells10.1016/j.ijhydene.2025.04.461 ↗
40. Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants10.1039/C2EE22547F ↗
41. Exsolution trends and co-segregation aspects of self-grown catalyst nanoparticles in perovskites10.1038/ncomms15967 ↗
42. Promoting exsolution of RuFe alloy nanoparticles on Sr2Fe1.4Ru0.1Mo0.5O6−δ via repeated redox manipulations for CO2 electrolysis10.1038/s41467-021-26001-8 ↗
43. Synergistic growth of nickel and platinum nanoparticles via exsolution and surface reaction10.1038/s41467-024-48455-2 ↗
44. Exsolution of phase-separated nanoparticles via trigger effect toward reversible solid oxide cell10.1016/j.apenergy.2022.119615 ↗
45. Galvanic restructuring of exsolved nanoparticles for plasmonic and electrocatalytic energy conversion
46. From material design to mechanism study: Nanoscale Ni exsolution on a highly active A-site deficient anode material for solid oxide fuel cells10.1016/j.nanoen.2016.07.013 ↗
47. In situ growth of nanoparticles through control of non-stoichiometry10.1038/nchem.1773 ↗
48. Ammonia thermal decomposition on quartz and stainless steel walls10.1016/j.ijhydene.2023.04.106 ↗
49. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
50. Black · 2011
51. Henins, the certification of SRM 640c; the primary NIST line position SRM for powder diffraction
52. PDF-5+: a comprehensive Powder Diffraction file™ for materials characterization10.1017/S0885715624000150 ↗
53. A new efficient and anti-sintering perovskite oxide-based internal catalyst for tubular direct-ammonia protonic ceramic fuel cells10.1016/j.jpowsour.2025.237008 ↗
54. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides
55. Synergistic effects of In-Situ exsolved Ni–Ru bimetallic catalyst on high-performance and durable direct-methane solid oxide fuel cells10.1021/jacs.3c12121 ↗
56. Carbon-neutral conversion of methane supported by Ni-(Rh, Co) bimetallic catalysts for low-temperature proton-conducting ceramic fuel cells10.1016/j.cej.2023.142334 ↗
57. Exsolution of nanoparticles on A-site-deficient lanthanum ferrite perovskites: its effect on co-electrolysis of CO2 and H2O10.1039/D1TA07389C ↗
58. Ex-solution kinetics of nickel-ceria–doped strontium titanate perovskites10.1007/s11581-021-04016-x ↗
59. Promotional effect of acidic oxide on catalytic activity and N2 selectivity over CeO2 for selective catalytic reduction of NOx by NH310.1002/aoc.4919 ↗
60. Paper-structured catalyst based on CeO2–ZrO2 fibers for soot combustion10.1007/s10562-019-02891-8 ↗
61. Catalytic ammonia decomposition over Ni-Ru supported on CeO2 for hydrogen production: effect of metal loading and kinetic analysis10.1016/j.apcatb.2021.119896 ↗
62. Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells10.1016/j.electacta.2020.135913 ↗
63. Effect of operating temperature on ammonia decomposition behavior and cell performance of direct ammonia solid oxide fuel cells10.1016/j.ijhydene.2024.10.195 ↗
64. How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells10.1016/j.electacta.2020.136764 ↗
65. Gas conversion impedance: SOFC anodes in H2/H2O atmospheres10.1149/199740.0530PV ↗
66. Vanadium (oxy)nitride as a new category of anode for direct ammonia solid oxide fuel cells cells10.1016/j.renene.2022.10.098 ↗
67. Comparison of electrochemical impedance spectra for electrolyte-supported solid oxide fuel cells (SOFCs) and protonic ceramic fuel cells (PCFCs)10.1038/s41598-021-90211-9 ↗
68. An approach to the analysis of the impedance spectra of solid oxide fuel cell using the DRT technique10.1016/j.electacta.2021.137858 ↗
69. Performance deviation analysis and reliability improvement during experimental development of lab-scale solid oxide single cells10.1039/D4EE02581D ↗