journal article·2026-06Open access

Harnessing the photovoltaic potential of dual absorbing layer in perovskite-based solar cells for efficient energy solutions

Muhammad Tahir Amin, Muhammad Imran

Abstract

Climate change, the depletion of fossil fuel resources, and the ongoing increase in global energy demand have accelerated the urgent search for sustainable and renewable energy alternatives. Multi-layer solar cells are an emerging technology with strong potential to meet rising energy demands by enhancing light absorption and improving charge-carrier collection. COMSOL Multiphysics is used in this study to numerically optimize a unique SnO 2 /CsSnI 3 /BiFeO 3 /Spiro-OMeTAD solar cell structure. Detailed calculations show that the device functions remarkably well, with a maximum short-circuit current density of 34.73 mA/cm 2 at 400 nm BiFeO 3 thickness. The maximum open-circuit voltage of 1.10 V and peak efficiency of 29.00% are reached at 1000 ns electron-hole lifetime in CsSnI 3 , while the fill factor reaches 84.76% at 50 nm CsSnI 3 thickness. These results underscore the critical importance of precise layer engineering for maximizing device efficiency. Further experimental studies are recommended to validate the simulations and to assess long-term operational stability under practical conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Synthesis and optical properties of lead-free cesium tin halide perovskite quantum rods with high-performance solar cell application10.1021/acs.jpclett.6b02344 ↗
2. Perovskite solar cell developments, whatʼs next?10.1016/j.nxener.2023.100004 ↗
3. Modelling and numerical simulations of eco-friendly double absorber solar cell “Spiro-OMeTAD/CIGS/MASnI3/CdS/ZnO” and its PV-module10.1016/j.orgel.2023.106781 ↗
4. Lead-free ‘Ca’ doped Bi0.80La0.20FeO3 multiferroic material for solar cell applications10.1016/j.matpr.2022.06.580 ↗
5. Optimization of lead-free CsSnI3-based perovskite solar cell structure
6. Elucidating the complexities of current saturation in heterojunction solar cells for sustainable energy solutions10.1016/j.mseb.2025.118992 ↗
7. Stability of perovskite solar cells: issues and prospects10.1039/D2RA05903G ↗
8. Recent intensification strategies of SnO2-based photocatalysts: a review10.1016/j.cej.2021.131564 ↗
9. 20.730% highly efficient lead-free CsSnI3-based perovskite solar cells with various charge transport materials: a SCAPS-1D study10.1007/s41939-024-00701-2 ↗
10. An absorber enrichment study and implications on the performance of lead-free CsSnI3 perovskite solar cells using one-dimensional solar cell capacitance simulator (1D-SCAPS)10.1007/s13538-023-01406-6 ↗
11. Modeling the degradation and recovery of perovskite solar cells10.1039/C6RA06635F ↗
12. Tin halide perovskites: from fundamental properties to solar cells10.1002/adma.202105844 ↗
13. Analysis of short-circuit current suppression mediated by strategically optimized buffer layer thickness in heterojunction solar cells10.1039/D5YA00290G ↗
14. Anomalous ferroelectric and magnetic behavior in BPFO-NZFO multiferroic nano-composites10.1016/j.ceramint.2018.03.252 ↗
15. Ferroelectric photovoltaic materials and devices
16. Comparative analysis of ‘La’ modified BiFeO3-based perovskite solar cell devices for high conversion efficiency10.1016/j.ceramint.2022.09.112 ↗
17. All oxide lead-free bismuth ferrite perovskite absorber based FTO/ZnO/BiFeO3/Au solar cell with efficiency ∼12%: first principal material and macroscopic device simulation studies10.1016/j.jallcom.2024.173599 ↗
18. Controllable electrical, magnetoelectric and optical properties of BiFeO3 via domain engineering10.1016/j.pmatsci.2022.100943 ↗
19. Effect on green energy conversion and stability with ‘Er’ modification in multiferroic based perovskite solar cell devices
20. Performance and stability of different all-inorganic and hybrid organic-inorganic perovskites in pn planar device structure FTO/SnO2/Perovskite/Cu2O/Carbon using SCAPS-1D simulation
21. Simulation and optimization of a CsSnI3/CsSnGeI3/Cs3Bi2I9 based triple absorber layer perovskite solar cell using SCAPS-1D10.1016/j.jpcs.2024.112480 ↗
22. Device engineering of a novel lead-free solar cell architecture utilizing inorganic CsSnCl3 and CsSnI3 perovskite-based dual absorbers for sustainable powering of wireless networks10.1007/s11664-024-11605-9 ↗
23. Numerical simulation and optimization of n-Al-ZnO/n-CdS/p-CZTSe/p-NiO (HTL)/Mo solar cell system using SCAPS-1D10.1016/j.rio.2022.100257 ↗
24. A numerical simulation for efficiency enhancement of CZTS based thin film solar cell using SCAPS-1D10.26565/2312-4334-2022-2-06 ↗
25. Significance of the direct relation between the fill factor and hole transport layer thickness in perovskite-based solar cells for green energies10.1039/D5RA06410D ↗
26. A SCAPS simulation investigation of non-toxic MAGeI3-on-Si tandem solar device utilizing monolithically integrated (2-T) and mechanically stacked (4-T) configurations10.1016/j.solener.2021.07.057 ↗
27. Numerical study of methylammonium lead iodide perovskite solar cells using SCAPS-1D simulation program10.1016/j.matpr.2021.12.425 ↗
28. All germanium-based double absorption layer perovskite solar cell based on SCAPS-1D analysis10.1016/j.solmat.2024.113153 ↗
29. Improvements and gaps in the empirical expressions for the fill factor of modern industrial solar cells10.1016/j.solmat.2023.112183 ↗
30. Simulation for impact of nanofluid spectral splitter on efficiency of concentrated solar photovoltaic thermal system10.1016/j.scs.2023.105139 ↗
31. Ag2BeSnX4 (S, Se, Te)-based kesterite solar cell modeling: a DFT investigation and SCAPS-1D analysis10.1016/j.solener.2023.112194 ↗
32. Influence of acceptor/donor densities and layer thicknesses on the efficiency of 2D ZnO/BFO/spiro-OMeTAD perovskite solar cells: a COMSOL simulation-based optimization10.1039/D4TA08899A ↗
33. Optimization of lead base perovskite solar cell with ZnO and CuI as electron transport material and hole transport material using SCAPS-1D
34. Impact of generation recombination rate in STO-enabled FA2BiCuI6-based double perovskite solar cell without HTL10.1007/s12596-023-01535-w ↗
35. Assessing the performance of MoTe2 based solar cell with Cu2O hole transport layer through device simulation10.1007/s43939-023-00061-7 ↗
36. Combined DFT, SCAPS-1D, and wxAMPS frameworks for design optimization of efficient Cs2BiAgI6-based perovskite solar cells with different charge transport layers10.1039/D2RA06734J ↗
37. Optical properties of thin films of tin iodide perovskite nanostructures10.1002/adom.202500792 ↗
38. Dual photoluminescence in low-temperature phase of CsSnI3 nanocrystals10.1021/jacs.5c10595 ↗
39. Exciton dynamics and photoresponse behavior of the in situ annealed CsSnBr3 perovskite films synthesized by thermal evaporation10.1088/1361-6528/ac6f11 ↗
40. CsSnI3 quantum dots as a multifunctional interlayer for high-efficiency bilayer perovskite solar cells
41. Linear trends between power output and absorbing layer thickness in next generation high-performance organic perovskite solar cells
42. Analysis of absorber layer properties effect on CIGS solar cell performance using SCAPS10.1016/j.ijleo.2015.02.037 ↗
43. Design and simulation of inorganic perovskite solar cell10.1007/s13204-021-02268-7 ↗
44. Effect of absorber layer thickness on the performance of bismuth-based perovskite solar cells10.1134/S1063782621040114 ↗
45. Numerical simulation of high-performance CsPbI3/FAPbI3 heterojunction perovskite solar cells10.3390/en15197301 ↗
46. Design and numerical analysis of CIGS-based solar cell with V2O5 as the BSF layer to enhance photovoltaic performance10.1063/5.0138354 ↗
47. Design and simulation of CsPb0.625Zn0.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement10.1038/s41598-024-81797-x ↗
48. Influence of electron transport layer (TiO2) thickness and its doping density on the performance of CH3NH3PbI3-based planar perovskite solar cells10.1007/s11664-020-08041-w ↗
49. Correlation between trap-assisted non-radiative recombination losses and thermal agitation in SnS-based solar cell: a state-of-the-art computational analysis10.1016/j.mseb.2025.118484 ↗
50. Direct correlation between open-circuit voltage and quasi-fermi level splitting in perovskite solar cells: a computational step involving thickness, doping, lifetime, and temperature variations for green solutions10.1039/D5RA01868D ↗
51. Numerical simulation of lead-free vacancy ordered Cs2PtI6 based perovskite solar cell using SCAPS-1D10.1039/D3RA04176J ↗
52. A computational study of carrier lifetime, doping concentration, and thickness of window layer for GaAs solar cell based on Al2O3 antireflection layer10.1016/j.solener.2022.02.006 ↗
53. A simulation approach for investigating the performances of cadmium telluride solar cells using doping concentrations, carrier lifetimes, thickness of layers, and band gaps10.1016/j.solener.2020.12.070 ↗
54. An extensive study on multiple ETL and HTL layers to design and simulation of high-performance lead-free CsSnCl3-based perovskite solar cells10.1038/s41598-023-28506-2 ↗
55. Enhancing the performance of Cs2TiBr6 lead-free perovskite solar cells: a simulation study on the impact of electron and hole transport layers10.1021/acs.langmuir.4c05265 ↗
56. Defect state dynamics in lead-free perovskite solar cells for enhanced efficiency
57. Optimizing thin-film solar cell performance: a comparative numerical analysis of GaAsN, GaInAsN and GaInAsNSb-based structures using SCAPS-1D
58. Advancing solar cell efficiency: experimental and numerical analysis of Mn-doped ZnS as a buffer layer10.1021/acsomega.5c02970 ↗
59. Effects of doping, transport layer thickness, and composition on the performance of mixed halide perovskite single-junction solar cells10.1007/s11664-025-12093-1 ↗
60. Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation10.1016/j.solener.2019.12.014 ↗
61. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
62. Optimization of lead-free BiFeO3 perovskite solar cells for efficient solar-energy conversion in futuristic green technologies10.1039/D5MA01257K ↗
63. Investigating the influence of absorber layer thickness on the performance of perovskite solar cells: a combined simulation and impedance spectroscopy study
64. Reverse design of broadband sound absorption structure based on deep learning method10.1038/s41598-025-86077-w ↗
65. Lead-free germanium iodide perovskite materials for photovoltaic applications10.1039/C5TA05741H ↗
66. GW quasiparticle band gap of the hybrid organic–inorganic perovskite CH3NH3PbI3: effect of spin–orbit interaction, semicore electrons, and self-consistency10.1103/PhysRevB.90.245145 ↗
67. Electron–hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
68. Optimal modelling of enhanced photovoltaic efficiency via tuning of layer thicknesses, donor/acceptor densities, and operating temperature in graphene oxide-based perovskite solar cell architectures10.1016/j.inoche.2025.115964 ↗