journal article·2026-01Open access

Thermal balancing of multiphase battery chargers controlled by phase shift

Christian Brañas, Alberto Pigazo, Rosario Casanueva, Francisco J. Azcondo, Francisco J. Diaz, Paula Lamo

Abstract

Power sources based on multiphase resonant converters, controlled by phase-shift at constant switching frequency, reduce conduction losses and enable current-mode operation for battery charger applications. However, phase-shift modulation in multiphase class D resonant converters inherently causes uneven current distribution among sections, leading to a thermal imbalances in transistors and inductors. To address this, a thermal balancing control strategy is proposed, which equalizes temperatures by modulating the amplitude (AM) of the resonant currents flowing through the transistors and inductors in each Class D section. A simple hysteresis band outer controller set up the average phase shift required to balance the temperature in the resonant branches. This method involves periodically exchanging the control signals of the inverter sections, which does not affect the output variables due to the symmetrical structure of the circuit. Thus, this approach enables thermal management without interfering with the inner output variable control set by the instantaneous phase shift. The proposal is validated experimentally using a four-phase LC p C s resonant converter designed for a Lithium-ion battery charger application. • Multiphase architecture with reduced conduction losses. • Phase-shift control at constant switching frequency. • The thermal balancing control equalizes the temperature of all components. • The converter exhibits a nearly constant efficiency across a wide load range.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced DC-DC Converters · Advanced Battery Technologies Research · Microgrid Control and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Study of charging strategies of lithium batteries and their effect on the batteries technologies
2. Battery, ultracapacitor, fuel cell, and hybrid energy storage systems for electric, hybrid electric, fuel cell, and plug-in hybrid electric vehicles: state of the art10.1109/TVT.2010.2047877 ↗
3. Large-signal stability analysis of all-electric ships with integrated energy storage systems
4. Evaluating the effects of constant current C rates on Li-Ion battery state of health and charging efficiency
5. A control method based on minimum conduction losses for high efficiency isolated dual-bridge series resonant converters
6. A generalized study of multiphase parallel resonant inverters for high-power applications10.1109/TCSI.2008.916704 ↗
7. A two-phase interleaved bidirectional DC-DC converter with asymmetrical duty limit control for wide-range DC-Bus voltage applications10.1109/TIA.2023.3333831 ↗
8. An inductive power transfer system supplied by a multiphase parallel inverter10.1109/TIE.2017.2686351 ↗
9. A 25 kW industrial prototype wireless electric vehicle charger
10. High power outphasing modulation10.1109/JRPROC.1935.227299 ↗
11. Kazimierczuk · 2012
12. Controller design and phase current balancing for fast dynamic performance in voltage mode controlled multiphase buck converters
13. Reliability of power electronic systems: an industry perspective10.1109/MIE.2018.2825481 ↗
14. Review of high-temperature power electronics converters10.1109/TPEL.2022.3148192 ↗
15. A guideline for reliability prediction in power electronic converters10.1109/TPEL.2020.2981933 ↗
16. Temperature sensorless thermal management strategy for interleaving power converters
17. Power imbalance compensation of parallel combining twin Class-E inverters by DC current detection fed back to gate-signal phase control
18. Research on active thermal control: actual status and future trends10.1109/JESTPE.2021.3067782 ↗
19. Design methodology and control strategy of phase shifted LLC resonant converter based SiC mosfet for battery charger of high speed train
20. A comprehensive time-domain-based optimization of a high-frequency LLC-Based Li-ion battery charger
21. Design of a bidirectional CLLC resonant DC-DC converter for energy storage system
22. Design of bidirectional CLLC resonant converter based on fundamental harmonic analysis method
23. Accurate electrical battery model capable of predicting runtime and I-V performance10.1109/TEC.2006.874229 ↗
24. An asynchronous electro-thermal coupling modeling method of lithium-ion batteries under dynamic operating conditions
25. Remaining useful life prediction of lithium-ion batteries based on an incremental internal resistance aging model and a gated recurrent unit neural network10.1016/j.energy.2025.137527 ↗
26. An electric-thermal coupling modeling method for lithium-ion battery using the state of charge normalization calculation method10.1016/j.est.2023.108724 ↗
27. Charging protocols for lithium-ion batteries and their impact on cycle life—An experimental study with different 18650 high-power cells10.1016/j.est.2016.02.005 ↗
28. A current sharing method utilizing single balancing transformer for a multiphase LLC resonant converter with integrated magnetics10.1109/JESTPE.2017.2777508 ↗
29. Novel phase-shift control technique for full-bridge converter to reduce thermal imbalance under light-load condition10.1109/TIA.2014.2347454 ↗
30. Deep analysis of Quasi-MPPT hysteresis control for multiple energy sources in low-power energy harvesting
31. A review of equivalent-circuit model, degradation characteristics and economics of Li-ion battery energy storage system for grid applications10.1016/j.est.2024.113908 ↗
32. Current phase surveillance in resonant converters for electric discharge applications to assure operation in zero-voltage-switching mode10.1109/TPEL.2011.2174384 ↗
33. Forward-flyback converter with current-doubler rectifier: analysis, design and evaluation results10.1109/63.737607 ↗
34. Methodology for thermal modeling, monitoring and control of power electronic modules
35. Unified SPICE compatible model for large and small-signal envelope simulation of linear circuits excited by modulated signals10.1109/TIE.2006.874421 ↗
36. Optimal trajectory control of burst mode for LLC resonant converter10.1109/TPEL.2012.2200110 ↗