Multilayer perovskite air-electrode architectures for enhanced performance in intermediate-temperature solid oxide cells
Source abstract
Abstract
In this work, we show that perovskite-based air electrodes for intermediate-temperature solid oxide cells based on SrFeO 3-δ and SrCoO 3-δ in a multilayer architecture exhibit enhanced electrochemical performance and stability in comparison to single-phase or composite analogues. X-ray pure phases of SrFe 0.9 Mo 0.1 O 3-δ , SrFe 0.9 Sb 0.1 O 3-δ and SrCo 0.95 Mo 0.05 O 3-δ were obtained by Pechini synthesis and deposited on Ce 0.9 Gd 0.1 O 2-δ electrolyte membranes by slurry coating. Scanning electron microscopy revealed comparable thicknesses, good adherence to the electrolyte and homogeneous grain size of various configurations involving single-phase electrodes, two electrode layers of different composition and a composite SrFe 0.9 Mo 0.1 O 3-δ −SrCo 0.95 Mo 0.05 O 3-δ electrode. The configuration SrCo 0.95 Mo 0.05 O 3-δ /SrFe 0.9 Mo 0.1 O 3-δ /Ce 0.9 Gd 0.1 O 2-δ shows a lower ASR of 0.15 Ω cm 2 at 700 °C compared to the best-performing, single-phase electrode studied, SrCo 0.95 Mo 0.05 O 3-δ (0.21 Ω cm 2 at 700 °C). However, all other tested multi-phase configurations, including the composite, show polarisation-resistance values, with and without dc bias, similar to or slightly higher than that of the single-phase cobaltite. Thermal cycling indicates that SrFe 0.9 Mo 0.1 O 3-δ in contact with the electrolyte notably benefits stability, most likely due to a better thermal and chemical match. The multilayer electrode SrCo 0.95 Mo 0.05 O 3-δ /SrFe 0.9 Mo 0.1 O 3-δ is promising for intermediate-temperature applications due to its superior electrochemical performance and stability in comparison to single-phase perovskite cobaltite.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Building the green hydrogen market e Current state and outlook on green hydrogen demand and electrolyzer manufacturing10.1016/j.ijhydene.2022.07.253 ↗
2. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
3. Clean, safe and efficient energy
4. Hydrogen energy, economy and storage: review and recommendation10.1016/j.ijhydene.2019.04.068 ↗
5. Decarbonising energy: the developing international activity in hydrogen technologies and fuel cells10.1016/j.jechem.2020.03.087 ↗
6. Intermediate temperature solid oxide fuel cells
7. A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels10.1016/j.enconman.2021.115175 ↗
8. Operation of solid oxide fuel cells with alternative hydrogen carriers10.1016/j.ijhydene.2019.05.065 ↗
9. A review of integration strategies for solid oxide fuel cells10.1016/j.jpowsour.2009.07.045 ↗
10. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
11. Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: a review10.1016/j.jpowsour.2021.230058 ↗
12. Solid oxide fuel cell: decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
13. A review on recent progress and selection of cobalt-based cathode materials for low temperature-solid oxide fuel cells
14. Toward reducing the operation temperature of solid oxide fuel cells: our past 15 years of efforts in cathode development10.1021/acs.energyfuels.0c01887 ↗
15. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
16. Nanomaterials for solid oxide fuel cells: a review10.1016/j.rser.2017.09.046 ↗
17. First principles study on the oxygen reduction reaction of the La1–xSrxMnO3–δ coated Ba1–xSrxCo1–yFeyO3–δ cathode for solid oxide fuel cells10.1016/j.ijhydene.2019.04.271 ↗
18. Electrochemical properties of LSM–CBO composite cathode10.1016/j.jpowsour.2003.07.009 ↗
19. Influence of the strontium content on the performance of La1-xSrxMnO3/Bi1.5Er0.5O3 composite electrodes for low temperature solid oxide fuel cells10.1016/j.jpowsour.2019.227649 ↗
20. Tin and iron co-doping strategy for developing active and stable oxygen reduction catalysts from SrCoO3−δ for operating below 800 °C10.1016/j.jpowsour.2015.06.095 ↗
21. Performance of SrCo1−xIrxO3−δ (X = 0.10 and 0.15) perovskites as potential cathode materials for intermediate-temperature solid oxide fuel cells (IT-SOFC)10.1021/acsaem.0c00848 ↗
22. New Nb-doped SrCo1−xNbxO3−δ perovskites performing as cathodes in solid-oxide fuel cells10.1016/j.ijhydene.2014.03.100 ↗
23. SrCo1-xSbxO3-δ perovskite oxides as cathode materials in solid oxide fuel cells10.1016/j.jpowsour.2008.12.138 ↗
24. Ta-doped SrCoO3-δ as a promising bifunctional oxygen electrode for reversible solid oxide fuel cells: a focused study on stability10.1039/C7TA02003A ↗
25. A new family of Mo-Doped SrCoO3-δ perovskites for application in reversible solid state electrochemical cells10.1021/cm300255r ↗
26. Enhancement of electrochemical performance of SrFe0.5Co0.5O3-δ as air electrode for intermediate temperature solid oxide cells via Sb and Mo doping10.1016/j.ceramint.2023.08.330 ↗
27. Preparation and characterization of graded cathode La0.6Sr0.4Co0.2Fe0.8O3−δ10.1016/j.jpowsour.2007.07.076 ↗
28. Investigation of graded La2NiO4 + δ cathodes to improve SOFC electrochemical performance10.1149/1.3298439 ↗
29. Functionally graded composite La2NiO4+δ and La4Ni3O10−δ solid oxide fuel cell cathodes10.1016/j.ssi.2013.11.041 ↗
30. Functionally graded bismuth oxide/zirconia bilayer electrolytes for high-performance intermediate-temperature solid oxide fuel cells (IT-SOFCs)10.1021/acsami.6b16660 ↗
31. Compositionally continuously graded cathode layers of (Ba0.5Sr0.5)(Fe0.91Al0.09)O3−δ–Gd0.1Ce0.9O2 by wet powder spraying technique for solid oxide fuel cells10.1016/j.jpowsour.2013.09.034 ↗
32. Functionally graded cathodes based on double perovskite type GdBaCo2O5+δ oxide10.1016/j.electacta.2014.04.140 ↗
33. Optimum cathode configuration for IT-SOFC using La0.4Ba0.6CoO3−δ and Ce0.9Gd0.1O1.9510.1016/j.ijhydene.2012.01.155 ↗
34. Performance and redox stability of a double–layer Sr2Fe1.5Mo0.5O6-δ – based electrode for solid state electrochemical application10.1016/j.electacta.2020.137058 ↗
35. Electrochemical behaviour of redox-robust electrode in contact with protonic electrolyte: case of double-layered Sr2Fe1.5Mo0.5O6-δ - Ce0.8Sm0.2O2-δ composite10.1016/j.ijhydene.2024.06.266 ↗
36. Fabrication and performance of advanced multi-layer SOFC cathodes10.1016/S0955-2219(01)00238-2 ↗
37. Multilayered LSC and GDC: an approach for designing cathode materials with superior oxygen exchange properties for solid oxide fuel cells10.1016/j.nanoen.2018.08.014 ↗
38. Anode-supported solid oxide fuel cells with multilayer LSC/CGO/LSC cathode10.1002/fuce.202000168 ↗
39. Optimisation of high-performance, cobalt-free SrFe1-xMoxO3−δ cathodes for solid oxide fuel cells prepared by spray pyrolysis10.1016/j.renene.2021.12.121 ↗
40. Optimisation of electrochemical performance of Sr(Fe,Sb)O3-δ air electrodes for intermediate-temperature solid oxide cells through spray-pyrolysis processing10.1016/j.jpowsour.2024.234243 ↗
41. M.P. Pechini, Method of preparing lead and alkaline Earth titanates and niobates and coating method using the same to form a capacitor, US Pat. No. 3330697, 1967.n.d.
42. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
43. Effect of sintering additive and low temperature on the electrode polarization of CGO10.1016/j.jallcom.2007.12.039 ↗
44. Sintering and properties of nanosized ceria solid solutions10.1016/S0167-2738(00)00437-9 ↗
45. Effects of firing conditions and addition of Co on bulk and grain boundary properties of CGO10.1016/j.ssi.2005.06.023 ↗
46. Microstructure of cobalt oxide doped sintered ceria solid solutions10.1007/s10832-006-6258-8 ↗
47. Effect of DC current polarization on the electrochemical behaviour of La2NiO4-δ and La3Ni2O7-δ-based systems10.1016/j.jpowsour.2008.10.073 ↗
48. Oxygen transport of A-site deficient Sr1−xFe0.5Co0.5O3−δ (x = 0–0.3) membranes10.1016/j.memsci.2012.01.023 ↗
49. Electrical and electrochemical properties of the Sr(Fe,Co,Mo)O3-δ system as air electrode for reversible solid oxide cells10.1016/j.jpowsour.2019.226895 ↗
50. Insights into the CO2 stability-performance trade-off of antimony-doped SrFeO3-δ perovskite cathode for solid oxide fuel cells10.1021/acsami.9b00876 ↗
51. Characterization of Ta/W co-doped SrFeO3-δ perovskite as cathode for solid oxide fuel cells10.1016/j.jallcom.2019.05.096 ↗
52. Thermal expansion of nickel-zirconia anodes in solid oxide fuel cells during fabrication and operation10.1149/1.1838468 ↗
53. Thermal expansion of Gd-doped ceria and reduced ceria10.1016/S0167-2738(00)00646-9 ↗
54. Phase composition, oxidation state and electrical conductivity of SrFe1.5−xCoxOy10.1016/S0167-2738(02)00317-X ↗
55. Unveiling structure–property relationships in Sr2Fe1.5Mo0.5O6−δ, an electrode material for symmetric solid oxide fuel cells10.1021/ja300831k ↗
56. Factors controlling oxygen migration barriers in perovskites10.1016/j.ssi.2016.09.007 ↗
57. Oxygen exchange kinetics on solid oxide fuel cell cathode materials—general trends and their mechanistic interpretation10.1557/jmr.2012.186 ↗
58. Insights into the oxygen reduction reaction on Cu-doped SrFeO3-δ cathode for solid oxide fuel cells10.1016/j.jpowsour.2021.229877 ↗
59. LaCrO3−CeO2-Based nanocomposite electrodes for efficient symmetrical solid oxide fuel cells10.1021/acsaem.1c04116 ↗
60. Polarisation mechanism of the misfit Ca-cobaltite electrode for reversible solid oxide cells10.1016/j.electacta.2021.137928 ↗
61. Electrochemical investigation of mixed ionic/electronic cathodes for SOFCs10.1016/j.ssi.2005.04.027 ↗
62. A linear free energy relationship for gassolid interactions: correlation between surface rate constant and diffusion coefficient of oxygen tracer exchange for electron-rich perovskites10.1002/anie.200460081 ↗
63. An investigation of oxygen reduction kinetics in LSF electrodes10.1149/2.011303jes ↗
64. Effects of surface overpotential at the La1-xSrxCo1-yFeyO3- yttria stabilized zirconia interface in a model solid oxide fuel cell cathode10.1016/j.ijhydene.2008.08.008 ↗
65. Reactive mechanisms of LSCF single-phase and LSCF-CGO composite electrodes operated in anodic and cathodic polarisations10.1016/j.electacta.2015.06.080 ↗
66. Design and optimization of self-assembled nanocomposite electrodes for SOFCs10.1016/j.jpowsour.2024.234866 ↗
67. Increased performance by use of a mixed conducting buffer layer, terbia-doped ceria, for Nd2NiO4+δ SOFC/SOEC oxygen electrodes10.1016/j.ijhydene.2019.10.008 ↗
68. Boosted electrochemical performance of ca-cobaltite-based composite electrodes for reversible solid oxide cells10.1002/er.8174 ↗
69. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
70. An approach to the analysis of the impedance spectra of solid oxide fuel cell using the DRT technique10.1016/j.electacta.2021.137858 ↗
71. Aurélie rolle, analysis and application of distribution of relaxation times in solid state ionics10.1016/j.ssi.2016.10.009 ↗
72. Reconstruction of relaxation time distribution from linear electrochemical impedance spectroscopy10.1016/j.jpowsour.2015.02.107 ↗
73. Thermochemical compatibility between selected (La,Sr)(Co,Fe,Ni)O3 cathodes and rare earth doped ceria electrolytes10.1016/j.jpowsour.2007.05.053 ↗