Thermoelectric performance enhancement of copper iodide pellets through potassium iodide doping
Source abstract
Abstract
The search for efficient and eco-friendly thermoelectric materials has garnered significant attention to meeting energy demands and address waste heat recovery challenges. Copper iodide (CuI), a p-type semiconductor with non-toxic properties, shows promise for thermoelectric applications, although it has not been extensively studied. This study investigates the thermoelectric performance of CuI doped with varying concentrations (0–9 %) of potassium iodide (KI). This doping significantly modified the electrical and thermal properties of CuI pellets. The electrical conductivity exhibited a notable increase, peaking at 5.08 S m −1 at 373 K with 9 % KI doping, which can be attributed to enhanced charge carrier density and bandgap reduction. The thermal conductivity also increased due to improved electron mobility , whereas the Seebeck coefficient reached a maximum of 7.3 mV K −1 at 7 % KI doping, demonstrating optimal thermoelectric performance at this concentration. The figure of merit (ZT) was maximized at 7 % KI doping, recording a remarkable increase from 0.035 × 10 −3 (undoped) to 26.95 × 10 −3 at 373 K. These findings underscore the potential of KI-doped CuI as an efficient thermoelectric material and pave the way for further optimization in advanced energy applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. High‐throughput strategies in the discovery of thermoelectric materials10.1002/adma.202311278 ↗
2. Andrews · 2022
3. Recent trends and future perspectives of thermoelectric materials and their applications10.1039/D4RA03625E ↗
4. Recent developments in flexible thermoelectrics: from materials to devices10.1016/j.rser.2020.110448 ↗
5. Thermoelectric power generators: State-Of-The-Art, heat recovery method, and challenges10.3390/electricity2030022 ↗
6. Organic-inorganic hybrid thermocouple intended for thermoelectric generators using low-cost nontoxic materials10.1007/s11664-022-09799-x ↗
7. Thermoelectric generator: a source of renewable energy
8. Thermoelectric materials and applications: a review10.3390/en16176409 ↗
9. Advancements in thermoelectric materials: optimization strategies for enhancing energy conversion10.1039/D4TA03666B ↗
10. Thermoelectric properties of semimetals
11. Thermoelectric properties of p‐type Bi2Te3–Sb2Te3–Sb2Se3 alloys and n‐type Bi2Te3–Bi2Se3 alloys in the temperature range 300 to 600 K10.1002/pssa.2210100210 ↗
12. Structural modifications and enhanced thermoelectric performance of CuI nanoparticles induced via al‐doping10.1002/aelm.202101214 ↗
13. Enhanced thermoelectric performance of copper iodide particles/nanowires composite in the low-temperature range10.1039/D4DT02048K ↗
14. Insights into stability, transport, and thermoelectric properties of transparent p-type copper iodide thin films10.1039/D2TC03652E ↗
15. Insights into stability, transport, and thermoelectric properties of transparent p-type copper iodide thin films10.1039/D2TC03652E ↗
16. Effective dopants for CuI single nanocrystals as a promising room temperature thermoelectric material10.1016/j.ceramint.2020.07.209 ↗
17. Preparation, morphology and thermoelectric performance of PEDOT/cuI nanocomposites10.1186/s42252-023-00047-x ↗
18. Semi-transparent copper iodide thin films on flexible substrates as p-type thermolegs for a wearable thermoelectric generator10.1016/j.tsf.2019.05.025 ↗
19. Transparent flexible thermoelectric material based on non-toxic earth-abundant p-type copper iodide thin film
20. Copper iodide on spacer fabrics as textile thermoelectric device for energy generation10.3390/ma16010013 ↗
21. Defect‐controlled copper iodide: a promising and ecofriendly thermoelectric material10.1002/ente.201700708 ↗
22. High-temperature and high-pressure physical properties of CuI with zinc-blende phase by a systematic ab initio investigation10.1016/j.ijleo.2017.11.006 ↗
23. First-principles study of the mechanisms for the pressure-induced phase transitions in zinc-blende CuBr and CuI10.1103/PhysRevB.69.064102 ↗
24. Thin films of copper (I) iodide doped with iodine and thiocyanate10.1002/pssa.201700520 ↗
25. Lattice strain advances thermoelectrics10.1016/j.joule.2019.02.008 ↗
26. Unraveling the electrical properties of solution-processed copper iodide thin films for CuI/n-Si solar cells10.1016/j.materresbull.2019.110518 ↗
27. Doping-induced structural and optical modifications in γ-CuI nanocrystals10.1016/j.jpcs.2023.111703 ↗
28. Metal binding proteins10.3390/encyclopedia1010024 ↗
29. Engineering copper iodide (CuI) for multifunctional p‐type transparent semiconductors and conductors
30. Dislocations accelerate oxygen ion diffusion in La0. 8Sr0. 2MnO3 epitaxial thin films10.1021/acsnano.7b06228 ↗
31. Influence of misfit dislocations on ionic conductivity at oxide interfaces10.1039/D4TA02034K ↗
32. Thin films of copper (I) iodide doped with iodine and thiocyanate10.1002/pssa.201700520 ↗
33. Influence of Pd doping on electrical and thermal properties of n-Type Cu0. 008Bi2Te2. 7Se0. 3 alloys10.3390/ma12244080 ↗
34. Phonon–dislocation interaction and its impact on thermal conductivity10.1063/5.0054078 ↗
35. Impact of screw and edge dislocations on the thermal conductivity of individual nanowires and bulk GaN: a molecular dynamics study10.1039/C7CP07821H ↗
36. A study of the impact of dislocations on the thermoelectric properties of quantum Wells in the Si/SiGe materials system10.1063/1.3665127 ↗
37. Enhanced seebeck coefficient through energy-barrier scattering in PbTe nanocomposites10.1103/PhysRevB.79.115311 ↗
38. Power conversion and its efficiency in thermoelectric materials10.3390/e22080803 ↗
39. High power factor vs. high zT—A review of thermoelectric materials for high-temperature application10.3390/e21111058 ↗
40. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
41. Thermoelectric materials and applications: a review10.3390/en16176409 ↗
42. Copper ion liquid-like thermoelectrics10.1038/nmat3273 ↗
43. Thermoelectric properties of La-doped BaSi210.2320/matertrans.E-MRA2008818 ↗
44. Influence of in doping on the thermoelectric properties of an AgSbTe 2 compound with enhanced figure of merit10.1039/c3ta14547f ↗
45. Multiple-filled skutterudites: high thermoelectric figure of merit through separately optimizing electrical and thermal transports10.1021/ja111199y ↗
46. Cubic AgPbmSbTe2+m: bulk thermoelectric materials with high figure of merit10.1126/science.1092963 ↗
47. Realizing zT of 2.3 in Ge1-x-ySbxInyTe via reducing the phase-transition temperature and introducing resonant energy doping10.1002/adma.201705942 ↗
48. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
49. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
50. Discovery of high-performance low-cost n-type Mg3Sb2-based thermoelectric materials with multi-valley conduction bands
51. High thermoelectric performance and low thermal conductivity in Cu2-yS1/3Se1/3Te1/3 liquid-like materials with nanoscale mosaic structures10.1016/j.nanoen.2017.10.042 ↗
52. 3D charge and 2D phonon transports leading to high out-of-plane zT in n-type SnSe crystals10.1126/science.aaq1479 ↗
53. Compositing effects for high thermoelectric performance of Cu2Se-based materials10.1038/s41467-023-38054-y ↗
54. Discovery of colossal seebeck effect in metallic Cu2Se10.1038/s41467-018-07877-5 ↗