journal article·2019-03

Origin of increased efficiency and decreased hysteresis of perovskite solar cells by using 4-tert-butyl pyridine as interfacial modifier for TiO2

Junsheng Luo, Zhongquan Wan, Fei Han, Haseeb Ashraf Malik, Bowen Zhao, Jianxing Xia, Chunyang Jia, Ruilin Wang

Publisher page

Abstract

Abstract With close to 100% internal quantum efficiency over the visible light region, photocurrents in perovskite solar cells (PSCs) are at their practical limits. Achieving high open-circuit voltage (Voc) and fill factor (FF) are imperative to further improve the power conversion efficiency (PCE) of PSCs. Here, we demonstrate that Voc and FF of PSCs can be significantly improved from 1.03 to 1.09 V and from 0.71 to 0.75, respectively, by modifying TiO2 with 4-tert-butyl pyridine (t-BP), resulting in 9% improvement in PCE from 16.14% to 17.58% for the best performing devices. To illuminate origin of increased PCE by t-BP modification, UPS, PL and EIS are performed. The results reveal that t-BP modification improves efficiency through two separated mechanisms. First, t-BP interfacial dipole layer can tune Fermi energy level and work function of TiO2, thus increasing built-in potential and improving band alignment at TiO2/CH3NH3PbI3 interface. Second, reduced defect states of TiO2 by specific binding of t-BP at defect sites, resulting in reduction of charge recombination are found to be another mechanism for increased efficiency. Meanwhile, the lower defect states on TiO2 further make contribution to reduce hysteresis of PSCs. These results will pave the way for high efficiency and low hysteresis PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. 6.5% efficient perovskite quantum-dot-sensitized solar cell10.1039/c1nr10867k ↗
3. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
4. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
5. Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
6. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
7. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
8. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
9. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
10. National Renewable Energy Laboratory, Best Research Cell Efficiency, http://www.nrel.gov/ncpv/images/efficiency_chart.jpg.
11. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
12. Organic charge carriers for perovskite solar cells10.1002/cssc.201500742 ↗
13. Improved understanding of the electronic and energetic landscapes of perovskite solar cells: high local charge carrier mobility, reduced recombination, and extremely shallow traps10.1021/ja506936f ↗
14. Toward high-efficiency, hysteresis-less, stable perovskite solar cells: unusual doping of a hole-transporting material using a fluorine-containing hydrophobic Lewis acid10.1039/C8EE00036K ↗
15. High-performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers10.1021/nl401044q ↗
16. Eliminated hysteresis and stabilized power output over 20% in planar heterojunction perovskite solar cells by compositional and surface modifications to the low-temperature-processed TiO2 layer10.1039/C7TA02317K ↗
17. Highly efficient planar perovskite solar cells via interfacial modification with fullerene derivatives10.1002/smll.201503361 ↗
18. Multifunctional fullerene derivative for interface engineering in perovskite solar cells10.1021/jacs.5b10614 ↗
19. High-performance planar perovskite optoelectronic devices: a morphological and interfacial control by polar solvent treatment10.1002/adma.201500465 ↗
20. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
21. Solution-processable ionic liquid as an independent or modifying electron transport layer for high-efficiency perovskite solar cells10.1021/acsami.6b12683 ↗
22. Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
23. Tailoring the interfacial chemical interaction for high-efficiency perovskite solar cells10.1021/acs.nanolett.6b04015 ↗
24. Amino-acid-induced preferential orientation of perovskite crystals for enhancing interfacial charge transfer and photovoltaic performance10.1002/smll.201604305 ↗
25. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
26. Efficiency and stability enhancement in perovskite solar cells by inserting lithium-neutralized graphene oxide as electron transporting layer10.1002/adfm.201504949 ↗
27. Reduced graphene oxide as efficient and stable hole transporting material in mesoscopic perovskite solar cells10.1016/j.nanoen.2016.02.027 ↗
28. TiO2 band shift by nitrogen-containing heterocycles in dye-sensitized solar cells: a periodic density functional theory study10.1021/la703696f ↗
29. The novel dopant for hole-transporting material opens a new processing route to efficiently reduce hysteresis and improve stability of planar perovskite solar cells10.1016/j.jpowsour.2017.01.010 ↗
30. Mild solution-processed metal-doped TiO2 compact layers for hysteresis-less and performance-enhanced perovskite solar cells10.1016/j.jpowsour.2017.10.079 ↗
31. Broadband dye-sensitized upconverting nanocrystals enabled near-infrared planar perovskite solar cells10.1016/j.jpowsour.2017.10.067 ↗
32. Ultraviolet-ozone surface modification for non-wetting hole transport materials based inverted planar perovskite solar cells with efficiency exceeding 18%10.1016/j.jpowsour.2017.06.013 ↗
33. Reducing hysteresis and enhancing performance of perovskite solar cells using acetylacetonate modified TiO2 nanoparticles as electron transport layers10.1016/j.jpowsour.2017.08.063 ↗
34. Large perovskite grain growth in low-temperature solution-processed planar p-i-n solar cells by sodium addition10.1021/acsami.5b11494 ↗
35. Understanding the relationship between ion migration and the anomalous hysteresis in high-efficiency perovskite solar cells: a fresh perspective from halide substitution10.1016/j.nanoen.2016.05.052 ↗
36. Incorporation of counter ions in organic molecules: new strategy in developing dopant-free hole transport materials for efficient mixed-ion perovskite solar cells10.1002/aenm.201602736 ↗
37. Molecular engineering of tetraphenylbenzidine-based hole transport material for perovskite solar cell10.1021/acs.jpca.6b12651 ↗
38. Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement10.1039/C6TA08783C ↗
39. On the origin of increased open circuit voltage of dye-sensitized solar cells using 4-tert-butyl pyridine as additive to the electrolyte10.1063/1.2266386 ↗
40. Successive surface engineering of TiO2 compact layers via dual modification of fullerene derivatives affording hysteresis-suppressed high-performance perovskite solar cells10.1039/C6TA07876A ↗
41. Iodine-doped ZnO nanopillar arrays for perovskite solar cells with high efficiency up to 18.24%10.1039/C7TA03150E ↗
42. Polyfluorene derivatives are high-performance organic hole-transporting materials for inorganic-organic hybrid perovskite solar cells10.1002/adfm.201401557 ↗
43. Phenylalkylamine passivation of organolead halide perovskites enabling high-efficiency and air-stable photovoltaic cells10.1002/adma.201603062 ↗
44. Simple way to engineer metal-semiconductor interface for enhanced performance of perovskite organic lead iodide solar cells10.1021/am5001773 ↗
45. A co-sensitized approach to efficiently fill the absorption valley, avoid dye aggregation and reduce the charge recombination10.1016/j.electacta.2016.08.072 ↗
46. Hybrid perovskite/perovskite heterojunction solar cells10.1021/acsnano.6b01535 ↗
47. DFT investigation of the TiO2 band shift by nitrogen-containing heterocycle adsorption and implications on dye-sensitized solar cell performance10.1016/j.solmat.2007.09.004 ↗
48. Charge separation versus recombination in dye-sensitized nanocrystalline solar cells: the minimization of kinetic redundancy10.1021/ja0460357 ↗