Silver-perovskite composite SOFC cathodes processed via mechanofusion
Source abstract
Abstract
Abstract Atomized silver spheres (≈20–50 μm diameter) were coated with 1 μm thick layers of (La 0.6 Sr 0.4 ) 0.98 Co 0.2 Fe 0.8 O 3 or Sm 0.5 Sr 0.5 CoO 3 via a mechanofusion dry processing method. The materials were subsequently assessed as solid oxide fuel cell cathodes on anode-supported YSZ electrolytes at 650–750 °C. The materials were subject to significant electrochemical conditioning during initial cell operation, and factors, such as temperature and operating voltage, affecting the conditioning rate are discussed. Post-conditioned power densities (at 0.7 V) were typically 550–650, 400–450 and 300–350 mW cm −2 at 750, 700 and 650 °C, respectively. Though power degradation rates of ≈7.5 and 4.5% (per 1000 h) were observed at 750 and 700 °C, respectively, no degradation was detected over almost 2000 h of testing at 650 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. Simner · J. Power Sources · 2006 · 161 · 11510.1016/j.jpowsour.2006.04.103 ↗
2. Pfeffer · Powder Technol. · 2001 · 117 · 4010.1016/S0032-5910(01)00314-X ↗
3. Ho · J. Phys. Chem. Solids · 1966 · 27 · 131910.1016/0022-3697(66)90016-3 ↗
4. Tu · Solid State Ionics · 1999 · 117 · 27710.1016/S0167-2738(98)00428-7 ↗
5. Xia · Solid State Ionics · 2002 · 149 · 1110.1016/S0167-2738(02)00131-5 ↗
6. Simner · J. Electrochem. Soc. · 2005 · 152 · 74010.1149/1.1864332 ↗