Optimal design and sensitivity analysis of a dual active bridge converter for electrolyzer-based hydrogen production
Source abstract
Abstract
The large-scale deployment of electrolyzers for green hydrogen production is hindered by challenges related to efficiency, power density, and cost-effectiveness across a wide range of operating conditions. To address these challenges, this work presents the design and experimental validation of a high-frequency gallium nitride field-effect transistor (GaNFET)-based inductance-capacitance dual-active-bridge (LC-DAB) converter tailored for electrolyzer applications. An analysis of load-dependent current variations first guides the optimal selection of resonant inductance and capacitance to minimize output power fluctuation. To enhance dynamic performance, a primary-current secondary-voltage synchronization (PCSVS) modulation technique is developed for electrolyzer application. This technique suppresses circulating currents and improves power transfer by synchronizing the resonant current with the secondary-side voltage. The design incorporates a detailed sensitivity analysis of converter parameters and a mathematical model of the electrolyzer to ensure stable operation. The proposed architecture and control strategy are validated through detailed simulations and a 1.5 kW laboratory prototype. Operating from a 37.5 V input to a 10-30 V output at output currents of up to 50 A, the prototype achieves a peak efficiency of 96.2%, supported by a comprehensive loss analysis. The results demonstrate a highly efficient and responsive power conversion solution tailored for modern electrolyzer systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Electric Vehicles and Infrastructure · Electric and Hybrid Vehicle Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Investigation on the heat transfer estimation of subcooled liquid hydrogen for transportation application using intelligent technique10.1016/j.ijhydene.2024.08.257 ↗
2. Artificial intelligence-based model to predict the heat transfer coefficient in flow boiling of liquid hydrogen as fuel and cryogenic coolant in future hydrogen-powered cryo-electric aviation
3. Ab-initio investigation of novel lead-free halide based Rb2CsXI6 (X = Ga, in) double perovskites: mechanical, structural, thermoelectric, and optoe- lectronic potential for photovoltaics and green energy applications10.1016/j.mseb.2024.117708 ↗
4. Real-time digital twin implementation of power electronics-based hydrogen production system10.1016/j.egyr.2025.04.017 ↗
5. A novel electrode for supercapacitors: efficient PVP-assisted synthesis of Ni3S2 nanostructures grown on Ni foam for energy storage10.1039/D0DT00191K ↗
6. Building the green hydrogen market-current state and outlook on green hydrogen demand and electrolyzer manufacturing10.1016/j.ijhydene.2022.07.253 ↗
7. International energy Agency-IEA
8. Overview of electrolyser and hydrogen production power supply from industrial perspective10.1016/j.ijhydene.2023.10.325 ↗
9. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
10. Power converter topologies for electrolyzer applications to enable electric grid services
11. Power quality and reactive power of water electrolyzers supplied with thyristor converters10.1016/j.jpowsour.2020.228075 ↗
12. Influence of rectifiers on the energy demand and gas quality of alkaline electrolysis systems in dynamic operation10.1016/j.apenergy.2019.05.014 ↗
13. Influence of the power supply on the energy efficiency of an alkaline water electrolyser10.1016/j.ijhydene.2009.02.017 ↗
14. High-performance two-stage DC/DC converter based on LADRC-PI hybrid control for PEM electrolyzer hydrogen production10.3390/mi16060665 ↗
15. “Integrated Boost-Forward-Flyback Converter With High Step-Up for Green Energy Power-Conversion Applications,”10.1049/pel2.12003 ↗
16. New DC/DC converter for electrolyser interfacing with stand-alone renewable energy system,”
17. Evaluation of DCX converters for off-grid Photovoltaic-BasedGreen hydrogen production,”10.1016/j.ijhydene.2021.03.129 ↗
18. Model and control for transient process of dual-bridge series resonant converter10.1109/TPEL.2024.3387939 ↗
19. Soft switched current fed dual active bridge isolated bidirectional series resonant DC-DC converter for energy storage applications
20. Design and control strategies for a 25 kW LLC converter with a wide output voltage range comprising distributed core transformers10.1007/s42835-025-02154-0 ↗
21. Unified modeling, analysis, and design of isolated bidirectional CLLC resonant DC-DC converters10.1109/JESTPE.2022.3145817 ↗
22. High-efficiency isolated bidirectional AC-DC converter for a DC distribution system10.1109/TPEL.2012.2213347 ↗
23. Analysis and design of high-frequency isolated dual-bridge series resonant DC/DC converter10.1109/TPEL.2009.2034662 ↗
24. Phase-controlled series-parallel resonant converter10.1109/63.233288 ↗
25. Adaptive modulation of resonant DAB Con- verters for wide range ZVS operation with minimum reactive circulating power10.1109/TIA.2022.3192366 ↗
26. Comparative study of resonant and non-resonant DC-DC converter with parasitic LC components of high-voltage transformer
27. Electrical circuit modeling of proton exchange membrane electrolyzer: the state-of-the-art, current challenges, and recommendations10.1016/j.ijhydene.2023.08.319 ↗
28. Preparation and electrochemical performance of NiCo2O4@NiCo2O4 composite nanoplates for high performance supercapacitor applications10.1039/C8NJ05401K ↗
29. Modeling of advanced alkaline electrolyzers: a system simulation approach10.1016/S0360-3199(02)00033-2 ↗
30. Effect of time on a hierarchical corn skeleton-like composite of CoO@ZnO as capacitive electrode material for high specific performance supercapacitors10.3390/en11123285 ↗
31. Static–dynamic modelling of the electrical behaviour of a commercial advanced alkaline water electrolyser10.1016/j.ijhydene.2012.09.125 ↗
32. Dynamic control and performance of a dual-active-bridge DC-DC converter10.1109/TPEL.2017.2773267 ↗
33. Deadbeat current controller for bidirectional dual-active-bridge converter using an enhanced SPS modulation method10.1109/TPEL.2020.3007706 ↗
34. Circuit averaging, averaged switch modeling, and simulation
35. Averaged modeling of PWM converters operating in discontinuous conduction mode10.1109/63.931052 ↗
36. State space average modeling, small signal analysis, and control implementation of an efficient single-switch high-gain multicell boost DC-DC converter with low voltage stress10.3390/electronics13163264 ↗
37. Generalized average modeling of dual active bridge DC-DC converter10.1109/TPEL.2011.2165734 ↗
38. A DC-DC center-tapped resonant dual-active bridge with two modulation techniques10.3390/electronics9101699 ↗
39. Implementation of real-time digital twin of dual active bridge converter in electrolyzer applications
40. Power electronics for green hydrogen generation with focus on methods, topologies, and comparative analysis10.1038/s41598-024-76191-6 ↗
41. Design considerations, modelling, and control of dual-active full bridge for electric vehicles charging applications10.1049/joe.2018.5279 ↗