Charged defect healing by N, N′–di (naphthalene-1-yl)-N, N′ diphenyl benzidine at the interface of CuInS2 nanoparticle hole transporting materials in carbon-based halide perovskite solar cells
Source abstract
Abstract
Recently, inorganic nanoparticles have been studied as hole transporting materials (HTM) in perovskite solar cells (PSCs). Inorganic HTMs are believed to provide better stability compared to conventional organic HTMs, such as spiro-OMeTAD. One of the challenges of nanoparticle HTMs is the high density of defects at the interface with the perovskite film, which reduces the device’s fill factor. In this study, we use N, N'–di (naphthalene-1-yl)-N, N' diphenyl benzidine (NPB) small molecules to passivate the surface of perovskite films in carbon-based PSCs with CuInS2 nanoparticles as the HTM. By applying NPB, trap density decreases from 1.35×1016 cm-3 to 5.09×1015 cm-3. NPB interface passivation results in a power conversion efficiency (PCE) of 16.11% compared to the control device with PCE of 14.92% in carbon-based perovskite solar cells. Moreover, improved contact angle was obtained for NPB surface-treated film (61.9°) compared to the reference film (40.6°), providing better protection against moisture induced degradation. The surface-treated devices maintained 92% of their efficiency after 4,000 hours of storage at ambient condition, while the control device showed a rapid and notable degradation, losing >58% of the initial efficiency under the same condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. New strategies for defect passivation in high-efficiency perovskite solar cells10.1002/aenm.201903090 ↗
2. Rakita
3. Tailoring in situ healing and stabilizing post-treatment agent for high-performance inverted CsPbI3Perovskite solar cells with efficiency of 16.6710.1021/acsenergylett.0c01728 ↗
4. Post-treatment techniques for high-performance perovskite solar cells
5. Bandgap tuning and compositional exchange for lead halide perovskite materials
6. Zardari
7. Best Research-Cell Efficiency Chart | Photovoltaic Research | NREL, (n.d.). https://www.nrel.gov/pv/cell-efficiency.html (accessed March 24, 2022).
8. Kim
9. Effect of relative humidity during the preparation of perovskite solar cells: performance and stability10.1016/j.solener.2020.02.052 ↗
10. Effect of temperature on the performance of perovskite solar cells10.1007/s10854-020-03029-y ↗
11. Achieving resistance against moisture and oxygen for perovskite solar cells with high efficiency and stability10.1021/acs.chemmater.1c00773 ↗
12. Schloemer
13. A brief review of hole transporting materials commonly used in perovskite solar cells
14. Development of dopant-free organic hole transporting materials for perovskite solar cells
15. Degradation of encapsulated perovskite solar cells driven by deep trap states and interfacial deterioration10.1039/C7TC03733C ↗
16. Light-induced effects on Spiro-OMeTAD films and hybrid lead halide perovskite solar cells10.1016/j.solmat.2016.03.024 ↗
17. Role of spiro-OMeTAD in performance deterioration of perovskite solar cells at high temperature and reuse of the perovskite films to avoid Pb-waste10.1039/C7TA07674F ↗
18. Polymeric, cost-effective, dopant-free hole transport materials for efficient and stable perovskite solar cells10.1021/jacs.9b08424 ↗
19. Highly stable and efficient perovskite solar cells with 22.0% efficiency based on inorganic–organic dopant-free double hole transporting layers
20. Green-solvent-Processable, dopant-free hole-transporting materials for robust and efficient perovskite solar cells10.1021/jacs.7b04949 ↗
21. K. Rakstys, C. Igci, M.K. Nazeeruddin, Chemical Science rsc.li/chemical-science, 10 (n.d.) 6739–6922. https://doi.org/10.1039/c9sc01184f.10.1039/C9SC01184F ↗
22. Inorganic hole transporting materials for stable and high efficiency perovskite solar cells10.1021/acs.jpcc.8b01177 ↗
23. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
24. Low-cost and highly efficient carbon-based perovskite solar cells exhibiting excellent long-term operational and UV stability10.1002/smll.201904746 ↗
25. A comparative study of different ETMs in perovskite solar cell with inorganic copper iodide as HTM10.1016/j.ijleo.2018.10.052 ↗
26. Chatterjee
27. High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer10.1039/C6NR01927G ↗
28. Advancement in inorganic hole transport materials for inverted perovskite solar cells10.1007/s11664-020-08264-x ↗
29. Solution-processed MoOx hole-transport layer with F4-TCNQ modification for efficient and stable inverted perovskite solar cells10.1021/acsaem.9b01004 ↗
30. Di Girolamo
31. Perovskite solar cells using surface-modified NiOx nanoparticles as hole transport materials in n-i-p configuration10.1002/solr.201900172 ↗
32. Hysteresis-free perovskite solar cells with compact and nanoparticle NiO for indoor application10.1016/j.solmat.2021.111095 ↗
33. Solution-processed Cu 2 ZnSnS 4 nanoparticle film as efficient hole transporting layer for stable perovskite solar cells10.1016/j.jpcs.2019.01.008 ↗
34. Zhao
35. Engineering of CIGS nanoparticle inks for colloidal stability, uniform film formation and application as HTL for perovskite solar cells10.1016/j.jiec.2021.10.034 ↗
36. 4-tert-butyl pyridine additive for moisture-resistant wide bandgap perovskite solar cells
37. A Cu3PS4 nanoparticle hole selective layer for efficient inverted perovskite solar cells10.1039/C8TA12100A ↗
38. Hydrophobic polystyrene passivation layer for simultaneously improved efficiency and stability in perovskite solar cells10.1021/acsami.8b04776 ↗
39. Polyvinylcarbazole as an efficient interfacial modifier for low-cost perovskite solar cells with CuInS2/carbon hole-collecting electrode10.1002/solr.202100074 ↗
40. Defect passivation of perovskite films for highly efficient and stable solar cells10.1002/solr.202100295 ↗
41. It's a trap! On the nature of localised states and charge trapping in lead halide perovskites10.1039/C9MH00500E ↗
42. Simultaneously enhanced moisture tolerance and defect passivation of perovskite solar cells with cross-linked grain encapsulation10.1016/j.jechem.2020.08.020 ↗
43. Ion-migration and carrier-recombination inhibition by the cation-π interaction in planar perovskite solar cells10.1016/j.orgel.2019.105387 ↗
44. Suppressing vacancy defects and grain boundaries via ostwald ripening for high-performance and stable perovskite solar cells
45. Sun
46. Y. Chen, N. Li, L. Wang, L. Li, Z. Xu, H. Jiao, P. Liu, C. Zhu, H. Zai, M. Sun, W. Zou, S. Zhang, G. Xing, X. Liu, J. Wang, D. Li, B. Huang, Q. Chen, H. Zhou, Impacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells, (n.d.). https://doi.org/10.1038/s41467-019-09093-1.10.1038/s41467-019-09093-1 ↗
47. Uratani
48. C. Gehrmann, D.A. Egger, Dynamic shortening of disorder potentials in anharmonic halide perovskites, (n.d.). https://doi.org/10.1038/s41467-019-11087-y.10.1038/s41467-019-11087-y ↗
49. Galvani
50. Temperature dependence of the Urbach energy in lead iodide perovskites10.1021/acs.jpclett.9b00138 ↗
51. X. Jiang, F. Wang, Q. Wei, H. Li, Y. Shang, W. Zhou, C. Wang, P. Cheng, Q. Chen, L. Chen, Z. Ning, Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design, (n.d.). https://doi.org/10.1038/s41467-020-15078-2.10.1038/s41467-020-15078-2 ↗
52. Amine-based passivating materials for enhanced optical properties and performance of organic-inorganic perovskites in light-emitting diodes10.1021/acs.jpclett.7b00372 ↗
53. Migration of constituent protons in hybrid organic-inorganic perovskite triggers intrinsic doping10.1021/jacs.7b09319 ↗
54. Amine additive reactions induced by the soft Lewis acidity of Pb2+ in halide perovskites. Part I: evidence for Pb–alkylamide formation10.1039/C8TC04871A ↗
55. Effect of energetic distribution of trap states on fill factor in perovskite solar cells10.1016/j.jpowsour.2020.229077 ↗
56. The positive function of incorporation of small molecules into perovskite materials for high-efficient stable solar cells
57. Energetic barriers to interfacial charge transfer and ion movement in perovskite solar cells10.1002/cphc.201700740 ↗
58. 3456−3465 downloaded via 5.116.225.253 on march 23
59. ARTICLE Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes
60. L. Meng, J. You, Y. Yang, Addressing the stability issue of perovskite solar cells for commercial applications, (n.d.). https://doi.org/10.1038/s41467-018-07255-1.10.1038/s41467-018-07255-1 ↗