New battery model considering thermal transport and partial charge stationary effects in photovoltaic off-grid applications
Source abstract
Abstract
The optimization of the battery pack in an off-grid Photovoltaic application must consider the minimum sizing that assures the availability of the system under the worst environmental conditions. Thus, it is necessary to predict the evolution of the state of charge of the battery under incomplete daily charging and discharging processes and fluctuating temperatures over day-night cycles. Much of previous development work has been carried out in order to model the short term evolution of battery variables. Many works focus on the on-line parameter estimation of available charge, using standard or advanced estimators, but they are not focused on the development of a model with predictive capabilities. Moreover, normally stable environmental conditions and standard charge-discharge patterns are considered. As the actual cycle-patterns differ from the manufacturer's tests, batteries fail to perform as expected. This paper proposes a novel methodology to model these issues, with predictive capabilities to estimate the remaining charge in a battery after several solar cycles. A new non-linear state space model is proposed as a basis, and the methodology to feed and train the model is introduced. The new methodology is validated using experimental data, providing only 5% of error at higher temperatures than the nominal one.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Electric Vehicles and Infrastructure · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. G.J. May, Recent progress in the development of VRLA batteries for the global telecom market, in: Proceedings of Intelec'96-international Telecommunications Energy Conference, pp. 168–171.10.1109/INTLEC.1996.572398 ↗
2. S.S. Misra, A.J. Williamson, On temperature compensation for lead acid batteries in float service: its impact on performance and life, in: Proceedings of Intelec'96-international Telecommunications Energy Conference, pp. 25–32.10.1109/INTLEC.1996.572374 ↗
3. Handbook for stationary vented lead-acid batteries Part 2 : installation
4. Análisis Experimental del Efecto de la Temperatura y la Tensión de Carga para la Optimización Energética de Sistemas de Almacenamiento de Instalaciones Fotovoltaicas Aisladas
5. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
6. Energy management of fuel cell/battery/supercapacitor hybrid power source for vehicle applications10.1016/j.jpowsour.2008.12.120 ↗
7. Energy management strategy for fuel cell-supercapacitor hybrid vehicles based on prediction of energy demand10.1016/j.jpowsour.2017.06.016 ↗
8. Valve Regulated Lead Acid battery float service life estimation using a Kalman filter10.1016/j.jpowsour.2008.12.123 ↗
9. A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: challenges and recommendations10.1016/j.rser.2017.05.001 ↗
10. State of charge estimation of LiFePO 4 battery based on a gain-classifier observer10.1016/j.egypro.2017.03.585 ↗
11. On-line optimization of battery open circuit voltage for improved state-of-charge and state-of-health estimation10.1016/j.jpowsour.2015.03.157 ↗
12. Online state-of-health estimation of VRLA batteries using state of charge10.1109/TIE.2012.2186771 ↗
13. Methods for state-of-charge determination and their applications10.1016/S0378-7753(01)00560-2 ↗
14. VRLA battery state-of-charge estimation in telecommunication power systems10.1109/41.847897 ↗
15. VRLA battery discharge reserve time estimation10.1109/TPEL.2004.836680 ↗
16. Saft Batteries · 2007
17. Saft Batteries · 2004
18. Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles10.1109/TVT.2004.842461 ↗
19. Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries10.1016/j.apenergy.2008.11.021 ↗
20. Accurate electrical battery model capable of predicting runtime and I–V performance10.1109/TEC.2006.874229 ↗
21. State-of-charge determination from EMF voltage estimation: using impedance, terminal voltage, and current for lead-acid and lithium-ion batteries10.1109/TIE.2007.899926 ↗
22. State-of-charge estimation for lithium-ion batteries under various operating conditions using an equivalent circuit model10.1016/j.compchemeng.2012.02.003 ↗
23. Evaluation of equivalent circuit diagrams and transfer functions for modeling of lithium-ion batteries
24. Development of a universal modeling tool for rechargeable lithium batteries10.1016/j.jpowsour.2007.06.157 ↗
25. Johnson · 2000
26. Dynamical models of lead-acid batteries: implementation issues10.1109/60.986432 ↗
27. Inline state of health estimation of lithium-ion batteries using state of charge calculation10.1016/j.jpowsour.2015.08.091 ↗
28. New dynamical models of lead-acid batteries10.1109/59.898088 ↗
29. State of charge estimation based on a real-time battery model and iterative smooth variable structure filter
30. A mathematical model for lead-acid batteries10.1109/60.124547 ↗
31. VRLA battery virtual reference electrode: battery float charge analysis10.1109/TEC.2008.926041 ↗
32. State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers
33. Improved modeling of lithium-based batteries using temperature-dependent resistance and overpotential