journal article·2024-07

Highly functional molten sodium hydroxide-BaZrO3 composite electrolyte with hybrid ionic conductivity for low-temperature solid oxide fuel cells

Dan Xu, Jiajun Sun, Yu Ding, An Yan, Yule Niu, Xu Yang, Yongjun Zhou, Enzhi Gao, Shifeng Xu

Publisher page

Abstract

Proton-conducting barium zirconate perovskite attracts considerable attention as an electrolyte for solid oxide fuel cells (SOFCs). To obtain BaZrO 3 -based electrolytes with high ionic conductivity at low temperatures, composite electrolytes named BaZrO 3+x wt% NaOH are designed and synthesized. A study is conducted to explore the effects of molten-state NaOH and a small amount of Na 2CO 3 generated during SOFC operation on the performance of composite electrolytes systematically. As a result of the addition of NaOH, the composite electrolyte is created with rich surfaces and solid-liquid interfaces, compared to traditional condensed electrolytes.The solid-liquid interface can serve as a high-speed ion conduction channel. In-situ surface oxygen deficiency induced by NaOH and the bridge function of carbonate enable rapid ion migration along the interface of the composite electrolyte. The fuel cell with the prepared electrolyte can deliver an excellent maximum power density (MPD) of 1039 mW cm - 2 at 550 °C. At 350 °C, the cells are also able to show a very impressive power density of 365 mW cm - 2. The concise design, convenient preparation process, and outstanding performance of the fuel cell collectively offer an effective strategy for advancing the manufacture of electrolyte materials for low-temperature operation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Strongly correlated perovskite fuel cells10.1038/nature17653 ↗
2. Thermal-expansion offset for high-performance fuel cell cathodes10.1038/s41586-021-03264-1 ↗
3. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
4. Cation-deficient perovskites for clean energy conversion10.1021/accountsmr.1c00036 ↗
5. Recent advancement of solid oxide fuel cells towards semiconductor membrane fuel cells10.20517/energymater.2023.54 ↗
6. Advanced materials for thin-film solid oxide fuel cells: recent progress and challenges in boosting the device performance at low temperatures
7. Recent advances on electrolyte materials for SOFC: a review10.1016/j.inoche.2023.110724 ↗
8. Junction and energy band on novel semiconductor-based fuel cells10.1016/j.isci.2021.102191 ↗
9. Superionic conductivity in ceria-based heterostructure composites for low-temperature solid oxide fuel cells10.1007/s40820-020-00518-x ↗
10. Engineering chemically active defects in monolayer MoS2 transistors via ion-beam irradiation and their healing via vapor deposition of alkanethiols10.1002/adma.201606760 ↗
11. Quantum-dot-in-perovskite solids10.1038/nature14563 ↗
12. 2D doping of proton conductors: BaZrO3-based heterostructures10.1002/aenm.202003267 ↗
13. Two-dimensional conducting states in infinite-layer oxide/perovskite oxide hetero-structures10.1088/1361-648X/ac30b6 ↗
14. ZnO/MgZnO heterostructure membrane with type II band alignment for ceramic fuel cells
15. A highly efficient multi-phase catalyst dramatically enhances the rate of oxygen reduction10.1016/j.joule.2018.02.008 ↗
16. Tailoring triple charge conduction in BaCo0.2Fe0.1Ce0.2Tm0.1Zr0.3Y0.1O3-δ semiconductor electrolyte for boosting solid oxide fuel cell performance10.1016/j.renene.2021.03.031 ↗
17. Tuning the energy band structure at interfaces of the SrFe0.75Ti0.25O3-δ-Sm0.25Ce0.75O2-δ heterostructure for fast ionic transport10.1021/acsami.9b13044 ↗
18. Fast ionic conduction in semiconductor CeO2-δ electrolyte fuel cells10.1038/s41427-019-0152-8 ↗
19. Surface engineered homo-structure enabling the fast ionic conduction for ceramic fuel cells10.1016/j.jallcom.2023.169360 ↗
20. Surface-Engineered homostructure for enhancing proton transport
21. Development of melt infiltrated gadolinium doped ceria-carbonate composite electrolytes for intermediate temperature solid oxide fuel cells10.1016/j.electacta.2018.10.030 ↗
22. Ionic conduction in Mg2+ and Sr2+ co-doped ceria/carbonates nanocomposite electrolytes10.1016/j.ijhydene.2015.01.002 ↗
23. Functional ceria-based nanocomposites for advanced low- temperature (300-600°C) solid oxide fuel cell: a comprehensive review, Mater
24. Intermediate temperature fuel cells based on doped ceria–LiCl–SrCl2 composite electrolyte10.1016/S0378-7753(01)00874-6 ↗
25. Preparation and electrochemical characterization of Er3+-doped ceria-chloride composite electrolyte for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2019.09.256 ↗
26. Strongly coupled Sm0.2Ce0.8O2-Na2CO3 nanocomposite for low temperature solid oxide fuel cells: one-step synthesis and super interfacial proton conduction10.1016/j.jpowsour.2018.03.035 ↗
27. Non-doped CeO2-carbonate nanocomposite electrolyte for low temperature solid oxide fuel cells10.1016/j.ceramint.2020.08.104 ↗
28. Cross-linked solid-liquid interfaces enable a fast proton transport in the aluminate heterostructure electrolyte10.1016/j.jcis.2023.04.159 ↗
29. Influence of sintering temperature on ceramic fuel cell electrolyte conductivity with lithium-compound electrode10.1016/j.ceramint.2020.04.053 ↗
30. NaOH induced oxygen deficiency for fluorescent SrVO3-x perovskite and its application in glucose detection10.1016/j.snb.2022.131685 ↗
31. Technological challenges and advancement in proton conductors: a review10.1021/acs.energyfuels.2c03926 ↗
32. The impact of nanoscale percolation in yttrium-doped BaZrO3 on the oxygen ion and proton conductivities: a density functional theory and kinetic Monte Carlo study10.1002/aesr.202200007 ↗
33. Fast oxygen transport in bottlelike channels for Y-doped BaZrO3: a reactive molecular dynamics investigation10.1021/acs.jpcc.9b07885 ↗
34. Synthesis of Y-doped BaZrO3 proton conducting electrolyte material by a continuous hydrothermal process in supercritical conditions: Investigation of the formation mechanism and electrochemical performance10.1016/j.ceramint.2023.05.070 ↗
35. Effect of BaO-B2O3 composite sintering aid on sinterability and electrical property of BaZr0.85Y0.15O3-δ ceramic10.1016/j.ceramint.2019.04.062 ↗
36. Effect of thermal treatment conditions on the solid-state synthesis of barium zirconate from barium carbonate and monoclinic zirconia10.1016/j.ceramint.2021.05.313 ↗
37. Formation of barium zirconate fibers for high-temperature thermal insulation applications10.1111/jace.14298 ↗
38. Effect of Na-, K-, Mg-, and Ga dopants in A/B-sites on the optical band gap and photoluminescence behavior of [Ba0.5Sr0.5]TiO3 powders10.1016/j.jlumin.2013.03.040 ↗
39. Molten salt oxidation: a versatile and promising technology for the destruction of organic-containing wastes10.1016/j.chemosphere.2011.05.061 ↗
40. Preparation and reactivation of magnetic biochar by molten salt method: relevant performance for chlorine-containing pesticides abatement10.1080/10962247.2018.1510441 ↗
41. Glycothermal synthesis and characterization of tetragonal barium titanate10.1016/j.jcrysgro.2004.10.023 ↗
42. Preparation and characterization of monodispersed BaTiO3 nanocrystals by sol–hydrothermal method10.1016/j.jcrysgro.2012.11.019 ↗
43. Ultrasonic assisted synthesis of BaTiO3 nanoparticles at 25°C and atmospheric pressure10.1016/j.ultsonch.2017.10.008 ↗
44. High performance NaxCoO2 as a cathode material for rechargeable sodium batteries10.1039/C5TA03173G ↗
45. Room temperature ferromagnetism and photoluminescence of multifunctional Fe doped BaZrO3 nanoceramics10.1016/j.jallcom.2016.08.224 ↗
46. Variation of citrate to metal cation ratio for dense and phase pure BaZrO3 via autocombustion synthesis10.1111/jace.18477 ↗
47. Infrared and thermal studies of strontium zirconyl oxalate hexahydrate10.1016/0040-6031(79)80049-0 ↗
48. On the interference of urea with CO2/CO32-chemistry of cellulose model solutions in NaOH(aq)10.1016/j.carbpol.2020.117059 ↗
49. Nanocomposites: a new opportunity for developing highly active and durable bifunctional air electrodes for reversible protonic ceramic cells10.1002/aenm.202101899 ↗
50. Bayesian and hierarchical bayesian based regularization for deconvolving the distribution of relaxation times from electrochemical impedance spectroscopy data10.1016/j.electacta.2017.07.050 ↗
51. The deep-DRT: a deep neural network approach to deconvolve the distribution of relaxation times from multidimensional electrochemical impedance spectroscopy data10.1016/j.electacta.2021.139010 ↗
52. A highly active, CO2-tolerant electrode for the oxygen reduction reaction10.1039/C8EE01140K ↗
53. High-entropy perovskite oxide: a new opportunity for developing highly active and durable air electrode for reversible protonic ceramic electrochemical cells10.1007/s40820-022-00967-6 ↗
54. Improving the electrochemical energy conversion of solid oxide fuel cells through the interface effect in La0.6Sr0.4Co0.2Fe0.8O3-δ-BaTiO3-δ electrolyte10.1016/j.jcis.2023.03.054 ↗
55. Degradation study of a reversible solid oxide cell (rSOC) short stack using distribution of relaxation times (DRT) analysis10.1016/j.ijhydene.2022.01.104 ↗
56. Residual carbon evolution in BaTiO3 ceramics studied by XPS after ion etching10.1016/S0955-2219(97)00119-2 ↗
57. Electrochemical performance of a Ni0.8Co0.15Al0.05LiO2 cathode for a low temperature solid oxide fuel cell10.1016/j.ijhydene.2020.06.189 ↗
58. Hard carbon nanosheets with uniform ultramicropores and accessible functional groups showing high realistic capacity and superior rate performance for sodium-ion storage10.1002/adma.202000447 ↗
59. Facile synthesis of morphology-controlled La: BaSnO3 for the enhancement of thermoelectric power factor10.1039/D0CE00702A ↗
60. Synthesis of LaAlO3 based materials for potential use as methane-fueled solid oxide fuel cell anodes10.1016/j.ijhydene.2015.06.019 ↗
61. In situ high temperature X-ray photoelectron spectroscopy study of barium strontium iron cobalt oxide10.1016/j.memsci.2011.08.006 ↗
62. Enhanced photocatalytic activity of perovskite NaNbO3 by oxygen vacancy engineering10.1039/C9CP01763A ↗
63. Synthesis of fine micro-sized BaZrO3 powders based on a decaoctahedron shape by the microwave-assisted hydrothermal method10.1021/cg800433h ↗
64. Fingerprints of short-range and long-range structure in BaZr1-xHfxO3 solid solutions: an experimental and theoretical study10.1039/C4CP05448B ↗
65. Sonochemical synthesis of monodispersed perovskite barium zirconate (BaZrO3) by using an ethanol–water mixed solvent10.1016/j.ceramint.2015.03.190 ↗
66. Synthesis of monodispersed perovskite barium zirconate (BaZrO3) by the sonochemical method10.1080/00150193.2013.842105 ↗
67. Effect of dopant nature on structures and lattice dynamics of proton-conducting BaZrO310.1016/j.ssi.2013.10.002 ↗
68. Effect of lithium fluoride on thermal stability of proton-conducting Ba(Zr0.8-x CexY0.2)O2.9 ceramics10.1016/j.ssi.2010.09.052 ↗
69. Raman spectroscopy of halogen-containing carbonates10.1002/jrs.1806 ↗
70. Raman and infrared spectral studies of anhydrous Li2CO3 and Na2CO310.1063/1.1674754 ↗
71. The average crystal structure of γ-Na2CO310.1107/S0567740869006285 ↗
72. Interfacial effect of the oxygen-ion distribution on the conduction mechanism in strontium-added Ce0.8Sm0.2O2-δ/Na2CO3 nanocomposite10.1021/acs.jpcc.6b07915 ↗
73. Ceria-based nanocomposite with simultaneous proton and oxygen ion conductivity for low-temperature solid oxide fuel cells10.1016/j.jpowsour.2010.11.033 ↗
74. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
75. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
76. Composite cathodes for protonic ceramic fuel cells: rationales and materials10.1016/j.compositesb.2022.109881 ↗
77. Exploring the structural uniformity and integrity of protonic ceramic thin film electrolyte using wet powder spraying10.1016/j.powera.2021.100067 ↗
78. Design of a highly stable and conductive electrolyte by suppressing barium copper oxide formation at the grain interfaces in Cux-doped BaCe0.7Zr0.1Dy0.2-xO3-δ sintered at a low temperature (1200 °C) for SOFCs10.1016/j.jcis.2023.10.094 ↗