journal article·2024-06

Triphenylamine-based interlayer with carboxyl anchoring group for tuning of charge collection interface in stabilized p-i-n perovskite solar cells and modules

P.K. Sukhorukova, E.A. Ilicheva, P.A. Gostishchev, L.O. Luchnikov, M.M. Tepliakova, D.O. Balakirev, I.V. Dyadishchev, A.A. Vasilev, D.S. Muratov, D.A. Kiselev, T.S. Ilina, Yu.N. Luponosov, A. Di Carlo, D.S. Saranin

Publisher page

Abstract

Interface engineering is one of the most critical directions in the development of photovoltaics (PVs) based on halide perovskites. A novel triphenylamine-based hole transport material (HTM) with a carboxyl anchoring group (TPATC) was developed for tuning the interface between nanocrystalline NiO and CsCH 3(NH 2) 2PbI 3-xCl x absorber in p-i-n device architectures. Transient spectroscopy measurements revealed that modification of the NiO surface with TPATC in perovskite solar cells (PSCs) reduces the concentration of ionic defects by an order of magnitude and reconfigures the energy levels of traps. Interface engineering allowed to reach power conversion efficiency of 20.58% for small area devices (0.15 cm 2) under standard AM 1.5 G conditions. Using TPATC interlayer also provided sustainability of the perovskite absorber to decomposition under operation conditions. After continuous light-soaking (ISOS-L-2 protocol), NiO/TPATC devices showed a slight decrease of 2% in maximum power. We explored the potential of TPATC to modify interfaces in perovskite solar modules (PSM, active area-64.8 cm 2). By applying slot-die-coated TPATC, the PCE at AM 1.5 G conditions increased from 13.22% for NiO PSM to 15.64% for NiO/TPATC ones. This study provides new insights into the interface stabilization for perovskite solar cells, behavior of the ionic defects and their contribution to the long-term stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Enhanced optical absorption via cation doping hybrid lead iodine perovskites10.1038/s41598-017-08215-3 ↗
2. Ultralong radiative states in hybrid perovskite crystals: compositions for submillimeter diffusion lengths10.1021/acs.jpclett.7b01922 ↗
3. Improved understanding of the electronic and energetic landscapes of perovskite solar cells: high local charge carrier mobility, reduced recombination, and extremely shallow traps10.1021/ja506936f ↗
4. Electronic properties of meso-superstructured and planar organometal halide perovskite films: charge trapping, photodoping, and carrier mobility10.1021/nn502115k ↗
5. The light and shade of perovskite solar cells
6. National Renewable Energy Laboratory (NREL) Home Page | NREL, (n.d.).
7. All-slot-die-coated inverted perovskite solar cells in ambient conditions with chlorine additives10.1002/solr.202100807 ↗
8. Fabrication and morphological characterization of high-efficiency blade-coated perovskite solar modules10.1021/acsami.9b05730 ↗
9. Cost-performance analysis of perovskite solar modules10.1002/advs.201600269 ↗
10. From defects to degradation: a mechanistic understanding of degradation in perovskite solar cell devices and modules10.1002/aenm.201904054 ↗
11. Degradation kinetics of inverted perovskite solar cells10.1038/s41598-018-24436-6 ↗
12. The causes of degradation of perovskite solar cells10.1021/acs.jpclett.9b00613 ↗
13. Perovskite solar cells
14. Role of interface in stability of perovskite solar cells10.1016/j.coche.2016.08.013 ↗
15. Interface and defect engineering for metal halide perovskite optoelectronic devices10.1002/adma.201803515 ↗
16. From bulk to surface: sodium treatment reduces recombination at the nickel oxide/perovskite interface10.1002/admi.201900789 ↗
17. One-Year stable perovskite solar cells by 2D/3D interface engineering10.1038/ncomms15684 ↗
18. When iodide meets bromide: halide mixing facilitates the light-induced decomposition of perovskite absorber films10.1016/j.nanoen.2021.106082 ↗
19. In situ XPS investigation of the X-ray-triggered decomposition of perovskites in ultrahigh vacuum condition10.1038/s41529-021-00162-9 ↗
20. Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability10.1039/C8TA03501F ↗
21. Impact of iodine antisite (IPb) defects on the electronic properties of the (110) CH3NH3PbI3 surface10.1063/1.5044667 ↗
22. Hole trapping by iodine interstitial defects decreases free carrier losses in perovskite solar cells: a time-domain ab initio study10.1021/acsenergylett.7b00183 ↗
23. Observation and mediation of the presence of metallic lead in organic-inorganic perovskite films10.1021/acsami.5b02237 ↗
24. Accumulation of deep traps at grain boundaries in halide perovskites10.1021/acsenergylett.9b00840 ↗
25. Imperfections and their passivation in halide perovskite solar cells
26. Stable NiOx-based inverted perovskite solar cells achieved by passivation of multifunctional star polymer10.1016/j.nanoen.2023.108506 ↗
27. Electrical properties of SAM-modified ITO surface using aromatic small molecules with double bond carboxylic acid groups for OLED applications10.1016/j.apsusc.2014.05.181 ↗
28. Applications of self‐assembled monolayers for perovskite solar cells interface engineering to address efficiency and stability10.1002/aenm.202002989 ↗
29. Formation and structure of self-assembled monolayers10.1021/cr9502357 ↗
30. Self-assembled monolayer enables hole transport layer-free organic solar cells with 18% efficiency and improved operational stability10.1021/acsenergylett.0c01421 ↗
31. Self-assembled monolayers enhance the performance of oxide thin-film transistors10.1088/1674-4926/42/3/030203 ↗
32. Advanced nonvolatile organic optical memory using self-assembled monolayers of porphyrin–fullerene dyads10.1021/acsami.1c24979 ↗
33. Towards linking lab and field lifetimes of perovskite solar cells10.1038/s41586-023-06610-7 ↗
34. Evaporated self‐assembled monolayer hole transport layers: lossless interfaces in p‐i‐n perovskite solar cells10.1002/aenm.202203982 ↗
35. Self‐assembled monolayers as interface engineering nanomaterials in perovskite solar cells10.1002/aenm.202002606 ↗
36. Surface passivation of sputtered NiO x using a SAM interface layer to enhance the performance of perovskite solar cells10.1021/acsomega.2c00509 ↗
37. Effect of surface modification of nickel oxide hole‐transport layer via self‐assembled monolayers in perovskite solar cells10.1002/nano.202100004 ↗
38. NiO x ‐seeded self‐assembled monolayers as highly hole‐selective passivating contacts for efficient inverted perovskite solar cells10.1002/solr.202100663 ↗
39. Self-assembled donor-acceptor hole contacts for inverted perovskite solar cells with an efficiency approaching 22%: the impact of anchoring groups10.1016/j.jechem.2021.11.001 ↗
40. Novel organic dyes incorporating a carbazole or dendritic 3,6-diiodocarbazole unit for efficient dye-sensitized solar cells10.1016/j.dyepig.2013.09.025 ↗
41. Semiconductor self-assembled monolayers as selective contacts for efficient PiN perovskite solar cells10.1039/C8EE01831F ↗
42. Recent progress in the development of high-efficiency inverted perovskite solar cells10.1038/s41427-023-00474-z ↗
43. Thin films of semiconductor nanocrystals self-assembled by wet coating10.1016/S0167-2991(01)82146-7 ↗
44. Molecule-doped nickel oxide: verified charge transfer and planar inverted mixed cation perovskite solar cell
45. Nickel vacancy behavior in the electrical conductance of nonstoichiometric nickel oxide film10.1063/1.4742993 ↗
46. Nickel vacancy behavior in the electrical conductance of nonstoichiometric nickel oxide film10.1063/1.4742993 ↗
47. Nickel oxide as efficient hole transport materials for perovskite solar cells10.1002/solr.201900001 ↗
48. Achieving high-performance planar perovskite solar cells with co-sputtered Co-doping NiO x hole transport layers by efficient extraction and enhanced mobility10.1039/C6TC03624D ↗
49. Polymeric surface modification of NiOx-based inverted planar perovskite solar cells with enhanced performance10.1021/acssuschemeng.8b04078 ↗
50. Transition metal carbides (MXenes) for efficient NiO-based inverted perovskite solar cells10.1016/j.nanoen.2021.105771 ↗
51. Cesium doped NiOxas an efficient hole extraction layer for inverted planar perovskite solar cells10.1002/aenm.201700722 ↗
52. Effect of cs-incorporated NiOx on the performance of perovskite solar cells10.1021/acsomega.7b01179 ↗
53. Progress, highlights and perspectives on NiO in perovskite photovoltaics10.1039/D0SC02859B ↗
54. Hole‐transport materials for perovskite solar cells10.1002/anie.201601757 ↗
55. Anchoring groups for dye-sensitized solar cells10.1021/am507334m ↗
56. Effect of oligothiophene π-bridge length in D-π-A star-shaped small molecules on properties and photovoltaic performance in single-component and bulk heterojunction organic solar cells and photodetectors
57. Novel organic dyes incorporating a carbazole or dendritic 3,6-diiodocarbazole unit for efficient dye-sensitized solar cells10.1016/j.dyepig.2013.09.025 ↗
58. Semiconductor self-assembled monolayers as selective contacts for efficient PiN perovskite solar cells10.1039/C8EE01831F ↗
59. Development of dopant‐free organic hole transporting materials for perovskite solar cells
60. Novel D-π-A-D Type aggregation induced emission luminogens based nanoparticles as efficient 1O2 photosensitizer and bright NIR imaging agent10.1016/j.dyepig.2020.109041 ↗
61. p -Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
62. 2D/3D heterojunction engineering at the grain boundaries towards high-performance inverted MA-free perovskite solar cells10.1016/j.orgel.2023.106918 ↗
63. Cation-induced band-gap tuning in organohalide perovskites: interplay of spin–orbit coupling and octahedra tilting10.1021/nl5012992 ↗
64. New interpretations of XPS spectra of nickel metal and oxides10.1016/j.susc.2006.01.041 ↗
65. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
66. Structural and electronic features of β-Ni(OH)2 and β-NiOOH from first principles10.1021/acs.jpcc.5b08481 ↗
67. Electron spectroscopy of the nickel-oxygen system10.1016/0368-2048(72)85014-X ↗
68. Kim · Surf. Sci. · 1974 · 43 · 62510.1016/0039-6028(74)90281-7 ↗
69. Organic adlayer on inorganic materials: XPS analysis selectivity to cope with adventitious contamination10.1016/j.apsusc.2016.04.147 ↗
70. Calibration of binding energy positions with C1s for XPS results10.1007/s11595-020-2312-7 ↗
71. Electron transport layer assisted by nickel chloride hexahydrate for open-circuit voltage improvement in MAPbI 3 perovskite solar cells10.1039/D2RA01913B ↗
72. Simple universal curve for the energy‐dependent electron attenuation length for all materials10.1002/sia.5033 ↗
73. Tauc · 1968 · vol. 3 · 37
74. Gostishchev · 2023 · vol. 2200941 · 1
75. FA x Cs 1– x PbI 3 nanocrystals: tuning crystal symmetry by A-site cation composition10.1021/acsenergylett.0c01069 ↗
76. Engineering the buried interface in perovskite solar cells via lattice-matched electron transport layer10.1038/s41566-023-01247-4 ↗
77. Fermi-level position at a semiconductor-metal interface10.1103/PhysRevB.28.2060 ↗
78. Chemical bonding and Fermi level pinning at metal-semiconductor interfaces10.1103/PhysRevLett.84.6078 ↗
79. Adsorption-induced Fermi level pinning10.1134/S1063783408030025 ↗
80. Theory of surface states10.1103/PhysRev.138.A1689 ↗
81. Unified disorder induced gap state model for insulator–semiconductor and metal–semiconductor interfaces10.1116/1.583556 ↗
82. Defect-polaron and enormous light-induced fermi-level shift at halide perovskite surface10.1021/acs.jpclett.2c01940 ↗
83. Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells10.1126/science.aba0893 ↗
84. Investigation of structural and optical properties of MAPbBr3 monocrystals under fast electron irradiation10.1039/D2TC00128D ↗
85. Reevaluation of photoluminescence intensity as an indicator of efficiency in perovskite solar cells10.1002/solr.202200049 ↗
86. Sarritzu · 2017
87. M. Stolterfoht, C.M. Wolff, J.A. Márquez, S. Zhang, C.J. Hages, D. Rothhardt, S. Albrecht, P.L. Burn, P. Meredith, T. Unold, D. Neher, Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells, (n.d.). https://doi.org/10.1038/s41560-018-0219-8.10.1038/s41560-018-0219-8 ↗
88. C.O. Martínez, R.L.Z. Hoye, Chemie, (n.d.). https://doi.org/10.1002/anie.202102360.10.1002/anie.202102360 ↗
89. Guo · 2021
90. Li · 2023 · vol. 2300586 · 1
91. New hole transporting materials for planar perovskite solar cells10.1039/C7CC08985F ↗
92. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
93. Operando dynamics of trapped carriers in perovskite solar cells observed via infrared optical activation spectroscopy10.1038/s41467-023-43852-5 ↗
94. Hole trapping by iodine interstitial defects decreases free carrier losses in perovskite solar cells: a time-domain Ab initio study10.1021/acsenergylett.7b00183 ↗
95. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
96. Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
97. Overcoming redox reactions at perovskite-nickel oxide interfaces to boost voltages in perovskite solar cells10.1016/j.joule.2020.06.004 ↗
98. Defect spectroscopy in halide perovskites is dominated by ionic rather than electronic defects10.1021/acsenergylett.1c02076 ↗
99. Deep‐level transient spectroscopy for effective passivator selection in perovskite solar cells to attain high efficiency over 2310.1002/cssc.202100980 ↗
100. Probing the ionic defect landscape in halide perovskite solar cells10.1038/s41467-020-19769-8 ↗