journal article·2022-03

Tuning defect nonequilibrium of brownmillerite Sr1+xY2-xO4+δ for rich-oxygen-vacancy direct ammonia solid oxide fuel cells cathode

Fulan Zhong, Yan Zhang, Yu Luo, Chongqi Chen, Huihuang Fang, Kongfa Chen, Chen Zhou, Li Lin, Chaktong Au, Lilong Jiang

Publisher page

Abstract

We prepared brownmillerite SrR 2O 4+δ (SRO, R = Y, Yb, Gd, Sm) with n-type semiconductors, where SYO is the most negative in conduction band and the smallest in band gap. And it is easy for the electrons to overcome energy barrier. As a result, SYO-based solid oxide fuel cells (SOFC) can offer a maximum power density (MPD) of 1.03 W/cm −2 at 800 °C, which is higher than that based on other three SRO oxides. Due to the enlargement of SYO unit cells and reduction of bond energy, the introduction of Sr 2+ at B sites of Sr 1+xY 2-xO 4+δ [SYO(x)] causes decrease of band gap, resulting in a 4-fold increase of electronic conductivity. The foreign Sr 2+ tunes oxygen non-stoichiometry and creates surface oxygen vacancies to boost interfacial transport. The measurement of oxygen transport reveals that SYO(0.10) exhibits a bulk diffusion coefficient 500 folds higher than that of La 0.7Sr 0.3MnO 3 (LSM). An anode supported Ni-YSZ|YSZ|SYO(0.10)-60YSZ direct ammonia solid oxide fuel cells (DA-SOFC) yields an MPD of 0.24 W/cm 2 at 600 °C and 1.21 W/cm 2 at 800 °C, about 1.73- and 1.29-folds higher than that of LSM-based SOFC, respectively. SYO(0.10)-based DA-SOFC can continuously operate at 800 °C for 100 h without significant degradation, displaying high thermal and operation stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Numerical simulation of methane fuelled cogenerative SOFCs for the production of synthesis gas and electrical energy10.1016/j.ces.2007.04.016 ↗
2. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
3. Analysis of a proton-conducting SOFC with direct internal reforming10.1016/j.ces.2009.06.066 ↗
4. New chemical systems for solid oxide fuel cells10.1021/cm902687z ↗
5. A new Pd doped proton conducting perovskite oxide with multiple functionalities for efficient and stable power generation from ammonia at reduced temperatures10.1002/aenm.202003916 ↗
6. Recent advances and perspectives of fluorite and perovskite-based dual-ion conducting solid oxide fuel cells10.1016/j.jechem.2020.09.010 ↗
7. Development and performance evaluation of a direct ammonia fuel cell stack10.1016/j.ces.2019.01.059 ↗
8. Design and operation of an aluminium alloy tank using doped Na3AlH6 in kg scale for hydrogen storage10.1016/j.jpowsour.2016.05.102 ↗
9. Micro-kinetic modeling of NH3 decomposition on Ni and its application to solid oxide fuel cells10.1016/j.ces.2011.07.007 ↗
10. An efficient direct ammonia fuel cell for affordable carbon-neutral transportation10.1016/j.joule.2019.07.005 ↗
11. Stability investigation for symmetric solid oxide fuel cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ electrode10.1149/2.0551507jes ↗
12. Progress in low-temperature solid oxide fuel cells with hydrocarbon fuels10.1016/j.cej.2020.126235 ↗
13. Effective promotion of oxygen reduction activity by rare earth doping in simple perovskite cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2019.227360 ↗
14. Highly stable Sr-Free cobaltite-based perovskite cathodes directly assembled on a barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells10.1002/cssc.201601645 ↗
15. Achieving fast oxygen diffusion in perovskites by cation ordering10.1063/1.1864244 ↗
16. Fast oxygen diffusion in A-site ordered perovskites10.1016/j.progsolidstchem.2007.01.014 ↗
17. Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review10.1007/s10853-008-2966-6 ↗
18. Development of solid-oxide fuel cells that operate at 500 °C10.1149/1.1391758 ↗
19. Performances of LnBaCo2O5+x-Ce0.8Sm0.2O1.9 composite cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2009.10.062 ↗
20. A review of processes and technologies for the recycling of lithium-ion secondary batteries10.1016/j.jpowsour.2007.11.074 ↗
21. Evaluation of Ln2CuO4 (Ln: La, Pr, Nd) oxides as cathode materials for IT-SOFCs10.1016/j.materresbull.2012.08.072 ↗
22. Comparative study of electrochemical properties of mixed conducting Ln2NiO4+δ (Ln=La, Pr and Nd) and La0.6Sr0.4Fe0.8Co0.2O3-δ as SOFC cathodes associated to Ce0.9Gd0.1O2-δ, La0.8Sr0.2Ga0.8Mg0.2O3-δ and La9Sr1Si6O26.5 electrolytes10.1016/j.ssi.2013.06.009 ↗
23. Oxygen diffusion and transport properties in non-stoichiometric Ln2xNiO4+δ oxides10.1016/j.ssi.2005.06.033 ↗
24. Preparation and electrochemical characterization of Ruddlesden–Popper oxide La4Ni3O10 cathode for IT-SOFCs by sol-gel method10.1007/s10008-013-2150-z ↗
25. A new anode material for solid oxide electrolyser: the neodymium nickelate Nd2NiO4+δ10.1016/j.jpowsour.2009.08.003 ↗
26. Electrochemical performance of strontium-doped neodymium nickelate mixed ionic–electronic conductor for intermediate temperature solid oxide fuel cells10.1007/s10008-012-1892-3 ↗
27. Electrode properties of doped Pr2NiO4-based oxide cathode for intermediate-temperature SOFCs10.2109/jcersj2.120.534 ↗
28. High performance praseodymium nickelate oxide cathode for low temperature solid oxide fuel cell10.1016/j.jpowsour.2010.09.036 ↗
29. The crystal chemistry of AM2O4 oxometallates10.1016/S0925-8388(02)00925-8 ↗
30. Effect of sintering aids on microstructures and PTCR Characteristics of (Sr0.2Ba0.8)TiO3 Ceramics10.1111/j.1151-2916.1993.tb05302.x ↗
31. Order–disorder transition of BaM2O4 bodies (M: La, Nd, Sm, Gd, Ho or Y) synthesized by sintering of BaCO3–M2O3 mixtures10.2109/jcersj.102.583 ↗
32. Magnetic properties of geometrically frustrated SrGd2O410.1103/PhysRevB.90.094421 ↗
33. Magnetic and spectral properties of the multisublattice oxides SrY2O4:Er3+ and SrEr2O410.1103/PhysRevB.92.094415 ↗
34. Influence of heat treatment on the structural and optical properties of SrGd2O4:Eu3+ phosphor10.1016/S1002-0721(14)60524-X ↗
35. Optical properties of Eu3+ activated SrLa2O4 red-emitting phosphors for WLED applications
36. Concentration and penetration depth dependent tunable emissions from Eu3+ co-doped SrY2O4:Dy3+ nanocrystalline phosphor10.1039/C3NJ00987D ↗
37. Parametric study on electrode position of a nanofibrous LaCoO3 SOFC cathode10.1016/j.ceramint.2020.10.141 ↗
38. Interface engineered perovskite oxides for enhanced catalytic oxidation: the vital role of lattice oxygen10.1016/j.ces.2021.116944 ↗
39. Ozone elimination over oxygen-deficient mnox based catalysts: effect of different transition metal dopants10.1016/j.ces.2020.116011 ↗
40. Luminescence and photocatalytic activity of ZnO nanocrystals: correlation between Structure and property10.1021/ic062394m ↗
41. Enhanced electrocatalytic activity and CO2 tolerant Bi0.5Sr0.5Fe1-xTaxO3-δ as cobalt-free cathode for intermediate–temperature solid oxide fuel cells10.1016/j.ceramint.2019.06.295 ↗
42. High throughput light absorber discovery, part 2: establishing structure-band gap energy relationships10.1021/acscombsci.6b00054 ↗
43. Cu-doped nickel oxide interface layer with nanoscale thickness for efficient and highly stable printable carbon-based perovskite solar cell10.1016/j.solener.2019.02.056 ↗
44. Influence of metal ions on the order–disorder transition temperature of the Ba-M-O (M: La, Y, In, or Ga) system10.1111/j.1151-2916.1993.tb08347.x ↗
45. Chemical bond characteristics, thermal expansion property and compressibility of AR2O4 (A = Ca, Sr, Ba; R = rare earths)10.1016/j.matchemphys.2008.09.066 ↗
46. The formation of performance enhancing pseudo–composites in the highly active La1-xCaxFe0.8Ni0.2O3 system for IT-SOFC application10.1002/adfm.201300481 ↗
47. A novel facile strategy to suppress Sr segregation for high-entropy stabilized La0.8Sr0.2MnO3-δ cathode10.1016/j.jpowsour.2020.228959 ↗
48. Chemical bulk diffusion and electrochemical properties of SmBa0.6Sr0.4Co2O5+δ cathode for intermediate solid oxide fuel cells10.1016/j.ijhydene.2014.06.134 ↗
49. Development of lanthanum strontium cobalt ferrite perovskite electrodes of solid oxide fuel cells–a review10.1016/j.ijhydene.2019.01.212 ↗
50. Effects of crystallographic orientation on the oxygen exchange rate of La0.7Sr0.3MnO3 thin films10.1016/j.ssi.2011.05.004 ↗
51. Improved phase stability and CO2 poisoning robustness of Y-doped Ba0.5Sr0.5Co0.8Fe0.2O3-δ SOFC cathodes at intermediate temperatures
52. Nano-integrated, high-performing cobalt-free bismuth-based composite cathode for low-temperature solid oxide fuel cells10.1021/acsami.8b08911 ↗
53. A highly efficient and robust nanofiber cathode for solid oxide fuel cells10.1002/aenm.201601890 ↗
54. Highly active and CO2-tolerant Sr2Fe1.3Ga0.2Mo0.5O6-δ cathode for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2020.227722 ↗
55. Electrostatic spray deposited Ca3Co4O9+δ and Ca3Co4O9+δ/Ce0.9Gd0.1O1.95 cathodes for SOFC10.1016/j.electacta.2020.137142 ↗
56. Probing oxygen vacancy effect on oxygen reduction reaction of the NdBaCo2O5+δ cathode for solid oxide fuel cells10.1016/j.jpowsour.2020.228017 ↗
57. Identification of O2 reduction processes at yttria stabilized zirconia|doped lanthanum manganite interface10.1016/S0378-7753(03)00436-1 ↗
58. Characterization of LSM-YSZ composite electrode by ac impedance spectroscopy
59. Impact of nonuniform potential in SOFC composite cathodes on the determination of electrochemical kinetic parameters a numerical analysis10.1149/1.2191187 ↗
60. Effects of calcium doping to oxygen reduction activity on Pr2-xCaxNiMnO6 cathode10.1016/j.jallcom.2018.11.046 ↗
61. High temperature electrocatalytic properties of the SOFC air electrode La0.8Sr0.2MnO3/YSZ10.1016/S0167-2738(97)00495-5 ↗