journal article·2024-03

Surface reconfiguration on triple conductive perovskite cathode with exceptional electrocatalytic activity and stability for protonic ceramic fuel cells

Hesheng Zheng, Xinghong Zhou, Xiaoyu Wang, Zhongyi Zhao, Yijian Wang, Caiyue Xie, Yifei Wang, Haowei Li, Xifeng Ding

Publisher page

Abstract

Protonic ceramic fuel cells (PCFCs) have been the focus of research due to their advantageous properties compared to oxygen ion-conducting solid oxide fuel cells (SOFCs). However, the biggest obstacles to the development of PCFC are the lower proton conductivity and the poor stability in high concentration steam environment. Herein, we report a novel composite cathode with surface reconfiguration, comprised of BaCoO 3-δ (BCO) nanoparticles by water-induced precipitation and Ba 0.9Pr 0.1Co 0.7Fe 0.2Y 0.1O 3-δ (BPCFY) substrate with e −/O 2−/H + triple conducting behavior, exhibiting high catalytic activity towards oxygen reduction reaction (ORR) and stability in high steam concentration. With wet hydrogen (3 vol% H 2O) as fuel and wet air (3 vol% H 2 O) as oxidant, the peak power density of NiO-BZCYYb|BZCYYb|BPCFY single cell reaches 750 mW•cm −2 at 700 °C, approximately 25 % higher than that using dry air at cathode side. Such improvement performance can be attributed to the precipitation of BaCoO 3-δ nanoparticles that increase the active adsorption sites as well as the increased oxygen vacancy concentration by Pr doping in BaCo 0.7Fe 0.2Y 0.1O 3-δ, which synergistically expand the triple phase boundary and facilitate ions migration. This work provided a promising approach to enhance the catalytic activity of PCFC at lower temperatures while also improving its tolerance to steam.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Proton-conducting oxides for energy conversion and storage10.1063/1.5135319 ↗
2. Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels10.1021/cr300491e ↗
3. Sulfur-tolerant redox-reversible anode material for direct hydrocarbon solid oxide fuel cells10.1002/adma.201104852 ↗
4. Triple-conducting layered perovskites as cathode materials for proton-conducting solid oxide fuel cells10.1002/cssc.201402351 ↗
5. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
6. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
7. Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells10.1016/j.pmatsci.2011.08.002 ↗
8. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
9. Revitalizing interface in protonic ceramic cells by acid etch10.1038/s41586-022-04457-y ↗
10. Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production10.1038/s41560-019-0333-2 ↗
11. Highly active and durable air electrodes for reversible protonic ceramic electrochemical cells enabled by an efficient bifunctional catalyst10.1002/aenm.202103783 ↗
12. Tuning the defects of the triple conducting oxide BaCo0.4Fe0.4Zr0.1Y0.1O3−δ perovskite toward enhanced cathode activity of protonic ceramic fuel cells10.1039/C9TA04335G ↗
13. Electrochemistry and energy conversion features of protonic ceramic cells with mixed ionic-electronic electrolytes10.1039/D1EE03109K ↗
14. Proton uptake into the protonic cathode material BaCo0.4Fe0.4Zr0.2O3-δ and comparison to protonic electrolyte materials10.1016/j.ssi.2016.09.012 ↗
15. Ca-containing Ba0.95Ca0.05Co0.4Fe0.4Zr0.1Y0.1O3-δ cathode with high CO2-poisoning tolerance for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2020.227909 ↗
16. Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ as a new high-performance cathode for both oxygen-ion and proton conducting fuel cells10.1016/j.cej.2020.127717 ↗
17. Tailoring cations in a perovskite cathode for proton-conducting solid oxide fuel cells with high performance10.1039/C9TA05300J ↗
18. Sr segregation in perovskite oxides: why it happens and how it exists10.1016/j.joule.2018.07.016 ↗
19. Stability of strontium-doped lanthanum manganite cathode in humidified air10.1016/j.jpowsour.2013.08.098 ↗
20. Degradation of solid oxide fuel cell cathodes accelerated at a high water vapor concentration10.1115/1.3117608 ↗
21. Influence of water vapor on long-term performance and accelerated degradation of solid oxide fuel cell cathodes10.1016/j.jpowsour.2010.08.014 ↗
22. Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells10.1038/s41467-022-29866-5 ↗
23. Water as a hole-predatory instrument to create metal nanoparticles on triple-conducting oxides10.1039/D1EE03046A ↗
24. A surface reconfiguration of a perovskite air electrode enables an active and durable reversible protonic ceramic electrochemical cell10.1016/j.ensm.2022.10.009 ↗
25. Pr-doping motivating the phase transformation of the BaFeO3-δ perovskite as a high-performance solid oxide fuel cell cathode10.1021/acsami.1c03514 ↗
26. Efficient perovskite cathode for solid oxide fuel cells towards enhanced oxygen reduction activity and stability by water-mediated exsolution10.1016/j.electacta.2022.141425 ↗
27. Promotion of oxygen reduction reaction on a double perovskite electrode by a water-induced surface modification10.1039/D0EE03283B ↗
28. Effects of water atmosphere on chemical degradation of PrBa0.5Sr0.5Co1.5Fe0.5O5+δ electrodes10.1016/j.ceramint.2020.11.124 ↗
29. Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites10.1021/ja3125349 ↗
30. Degradation analysis of anode-supported intermediate temperature-solid oxide fuel cells under various failure modes10.1016/j.jpowsour.2014.11.077 ↗
31. Rational design of Sr2Fe1.5Mo0.4Y0.1O6-δ oxygen electrode with triple conduction for hydrogen production in protonic ceramic electrolysis cell10.1016/j.seppur.2022.121780 ↗
32. Surface engineering of perovskite oxide for bifunctional oxygen electrocatalysis10.1002/smtd.201800279 ↗
33. Effect of textural structure on the catalytic performance of LaCoO3 for CO oxidation10.1002/cctc.201402064 ↗
34. B-site La, Ce, and Pr-doped Ba0.5Sr0.5Co0.7Fe0.3O3-δ perovskite cathodes for intermediate-temperature solid oxide fuel cells: effectively promoted oxygen reduction activity and operating stability10.1016/j.jpowsour.2021.229778 ↗
35. Evaluating the effect of Pr-doping on the performance of strontium-doped lanthanum ferrite cathodes for protonic SOFCs10.1016/j.ceramint.2019.10.017 ↗
36. Enhancing oxygen surface exchange coefficients of strontium-doped lanthanum manganates with electrolytes10.1016/j.ijhydene.2011.11.008 ↗
37. Mass relaxation vs. electrical conductivity relaxation of a proton conducting oxide upon hydration and dehydration10.1016/j.ssi.2009.09.006 ↗
38. A-site deficient (La0.6Sr0.4)1−sFe0.8Co0.2O3−δ perovskites as SOFC cathodes10.1016/j.ssi.2007.07.012 ↗
39. Aspects of the formation and mobility of protonic charge carriers and the stability of perovskite-type oxides10.1016/S0167-2738(99)00188-5 ↗
40. Stable, efficient and cost-competitive Ni-substituted Sr(Ti,Fe)O3 cathode for solid oxide fuel cell: effect of A-site deficiency10.1016/j.jpowsour.2020.227762 ↗
41. Ca-containing CO2-tolerant perovskite materials for oxygen separation10.1016/j.memsci.2011.10.030 ↗
42. Effect of CO2 and SO2 on oxygen permeation and microstructure of (Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ membranes10.1016/j.memsci.2012.11.075 ↗