journal article·2023-10

Exploring heterogeneous phases in highly A-site-deficient titanate with Ni exsolution

Jiaming Yang, Jun Zhou, Zhengrong Liu, Yueyue Sun, Chaofan Yin, Kaiteng Wang, Ruhuan Li, Zilin Zhou, Kai Wu

Publisher page

Abstract

In-situ exsolution technique, as an efficient and controllable strategy of surface modification, has been extensively applied in reversible solid oxide cells (RSOCs). Here, we demonstrate La xSr xTi 0.9Ni 0.1O 3-δ fiber decorated by exsolved Ni nanoparticles and highlight the impacts of A-site deficiency on Ni exsolution and electrochemical performance of RSOCs. The La 0.4Sr 0.4Ti 0.9Ni 0.1O 3 (A/B = 0.8) fibrous fuel electrode decorated by Ni nanoparticles with moderate Ni exsolution displays optimum electrochemical performance at 800 °C, achieving ∼540 mW cm −2 in SOFC mode and −0.742/0.385 A cm −2 under 1.3/0.7 V in RSOC mode. In contrast, high A-site deficiency (A/B < 0.8) allows heterogeneous phases (NiTiO 3) and excessive Ni exsolution along with alterations of fibrous morphology, leading to slow gas diffusion, sluggish catalysis, and Ni agglomeration. The distribution of relaxation time (DRT) results show that the rate-limiting steps in symmetrical cells are gas diffusion, hydrogen adsorption, and dissociation, accounting for over 89% of the total R P . Ni-equilibrium model based on X-ray Rietveld refinement calculates the degree of exsolution with various A-site deficiency, revealing NiTiO 3 is the key factor of excessive exsolution. Our work of high A-site deficiency exemplified here may serve in the design and nanoengineering of fibrous ABO 3 perovskite oxides for RSOCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Mapping global development potential for renewable energy, fossil fuels, mining and agriculture sectors10.1038/s41597-019-0084-8 ↗
2. Tailoring the surface of perovskite through in situ growth of Ru/RuO2 nanoparticles as robust symmetrical electrodes for reversible solid oxide cells
3. Highly conductive and durable Nb(Ta)-doped proton conductors for reversible solid oxide cells10.1021/acsenergylett.2c01544 ↗
4. Layered barium cobaltite structure materials containing perovskite and CdI2-based layers for reversible solid oxide cells with exceptionally high performance10.1016/j.cej.2022.138954 ↗
5. (La,Sr)(Ti,Fe)O3−δ perovskite with in-situ constructed FeNi3 nanoparticles as fuel electrode for reversible solid oxide cell10.1002/er.7177 ↗
6. A highly efficient bifunctional electrode fashioned with in situ exsolved NiFe alloys for reversible solid oxide cells10.1021/acssuschemeng.2c01360 ↗
7. Development of nickel based cermet anode materials in solid oxide fuel cells – now and future
8. Preparation and characterization of a solid oxide fuel cell tubular cell for direct use with sour gas10.1016/j.jpowsour.2013.03.104 ↗
9. Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate10.1016/S0167-2738(02)00140-6 ↗
10. Synthesis and electrical characterisation of doped perovskite titanates as potential anode materials for solid oxide fuel cells10.1039/a702865b ↗
11. Electrical conductivity and structural stability of La-doped SrTiO3 with A-site deficiency as anode materials for solid oxide fuel cells10.1016/j.ijhydene.2010.05.043 ↗
12. Structure and properties of La0.4Sr0.4TiO3 ceramics for use as anode materials in solid oxide fuel cells10.1021/cm101508w ↗
13. Exsolution of nickel nanoparticles at the surface of a conducting titanate as potential hydrogen electrode material for solid oxide electrochemical cells10.1016/j.jpowsour.2012.09.062 ↗
14. Progress in La-doped SrTiO3 (LST)-based anode materials for solid oxide fuel cells10.1039/C3RA42666A ↗
15. A robust direct-propane solid oxide fuel cell with hierarchically oriented full ceramic anode consisting with in-situ exsolved metallic nano-catalysts10.1016/j.memsci.2023.121637 ↗
16. The metal/oxide heterointerface delivered by solid-based exsolution strategy: a review10.1016/j.cej.2022.135868 ↗
17. Thermal stability of an in situ exsolved metallic nanoparticle structured perovskite type hydrogen electrode for solid oxide cells10.1021/acssuschemeng.9b04350 ↗
18. In-situ exsolution of Ni nanoparticles to achieve an active and stable solid oxide fuel cell anode catalyst on A-site deficient La0.4Sr0.4Ti0.94Ni0.06O3-δ10.1016/j.jiec.2021.07.037 ↗
19. Exsolution in Ni-doped lanthanum strontium titanate: a perovskite-based material for anode application in ammonia-fed Solid Oxide Fuel Cell10.1016/j.ijhydene.2022.02.133 ↗
20. Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants10.1039/C2EE22547F ↗
21. Cobalt doped LaSrTiO3-δ as an anode catalyst: effect of Co nanoparticle precipitation on SOFCs operating on H2S-containing hydrogen10.1039/c3ta11315a ↗
22. Reversibly in-situ anchoring copper nanocatalyst in perovskite titanate cathode for direct high-temperature steam electrolysis10.1016/j.ijhydene.2014.01.108 ↗
23. Synergistically enhanced hydrogen evolution electrocatalysis by in situ exsolution of metallic nanoparticles on perovskites10.1039/C8TA02347F ↗
24. Platinum incorporation into titanate perovskites to deliver emergent active and stable platinum nanoparticles10.1038/s41557-021-00696-0 ↗
25. Bimetallic exsolved heterostructures of controlled composition with tunable catalytic properties10.1021/acsnano.1c11111 ↗
26. In situ growth of nanoparticles through control of non-stoichiometry10.1038/nchem.1773 ↗
27. Stability and activity controls of Cu nanoparticles for high-performance solid oxide fuel cells10.1016/j.apcatb.2020.119828 ↗
28. Atomic-scale insight into exsolution of CoFe alloy nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with efficient CO2 electrolysis10.1002/anie.202006536 ↗
29. Emergence and future of exsolved materials10.1002/smll.202006479 ↗
30. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
31. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: a Bayesian and hierarchical Bayesian approach10.1016/j.electacta.2015.03.123 ↗
32. Bayesian and hierarchical Bayesian based regularization for deconvolving the distribution of relaxation times from electrochemical impedance spectroscopy data10.1016/j.electacta.2017.07.050 ↗
33. All-solid-state direct Z-scheme NiTiO3/Cd0.5Zn0.5S heterostructures for photocatalytic hydrogen evolution with visible light10.1039/D1TA01220G ↗
34. A mesoporous catalytic fiber architecture decorated by exsolved nanoparticles for reversible solid oxide cells10.1016/j.jpowsour.2020.228349 ↗
35. New tolerance factor to predict the stability of perovskite oxides and halides10.1126/sciadv.aav0693 ↗
36. Crystal structure classification in ABO3 perovskites via machine learning10.1016/j.commatsci.2020.110191 ↗
37. Shannon · 1976 · A32 · 751
38. Vanadium-doped strontium molybdate with exsolved Ni nanoparticles as anode material for solid oxide fuel cells10.1021/acsami.9b15584 ↗
39. Highly stable and efficient catalyst with in situ exsolved Fe-Ni alloy nanospheres socketed on an oxygen deficient perovskite for direct CO2 electrolysis10.1021/acscatal.6b01555 ↗
40. In-situ Ni exsolution from NiTiO3 as potential anode for solid oxide fuel cells10.1016/j.ijhydene.2020.06.118 ↗
41. Sol-gel synthesis and application of NiO, NiTiO3 and Ni5TiO4(BO3)2 on open-cell TiO2 foams for CO2 methanation10.1016/j.ces.2021.117151 ↗
42. Modification of the structural properties of NiTiO3 materials by transition metal dopants: the dopant size effect10.1016/j.jallcom.2017.12.224 ↗
43. Raman study of the structural distortion in the Ni1-xCoxTiO3 solid solution10.1021/acs.inorgchem.6b01693 ↗
44. Nickel titanate (NiTiO3) thin films: RF-sputtering synthesis and investigation of related features for photocatalysis10.1039/C6CE00306K ↗
45. In situ study on the structural transition in YBO3 through Raman spectroscopy10.1016/j.matchemphys.2011.09.041 ↗
46. Optical and structural properties of Mo-doped NiTiO3 materials synthesized via modified Pechini methods10.1016/j.apsusc.2017.03.123 ↗
47. Electrospun porous perovskite La0.6Sr0.4Co1–xFexO3–δ nanofibers for efficient oxygen evolution reaction10.1002/admi.201700146 ↗
48. Nano-socketed nickel particles with enhanced coking resistance grown in situ by redox exsolution10.1038/ncomms9120 ↗
49. An efficient and robust lanthanum strontium cobalt ferrite catalyst as a bifunctional oxygen electrode for reversible solid oxide cells10.1039/D0TA11233J ↗
50. Preparation and characterization of symmetrical protonic ceramic fuel cells as electrochemical hydrogen pumps10.1016/j.jpowsour.2020.228036 ↗
51. Exceptionally high-performance reversible solid oxide electrochemical cells with ultrathin and defect-free Sm0.075Nd0.075Ce0.85O2-δ interlayers
52. Charge-transfer modeling and polarization DRT analysis of proton ceramics fuel cells based on mixed conductive electrolyte with the modified anode-electrolyte interface10.1021/acsami.8b10429 ↗
53. In-situ exsolution of nanoparticles from Ni substituted Sr2Fe1.5Mo0.5O6 perovskite oxides with different Ni doping contents, Electrochim
54. Novel high-entropy perovskite-type symmetrical electrode for efficient and durable carbon dioxide reduction reaction
55. Ex-solution of Ni nanoparticles in a La0.2Sr0.8Ti1-xNixO3-δ alternative anode for solid oxide fuel cell10.1016/j.ssi.2013.10.016 ↗
56. Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell10.1016/j.jpowsour.2020.228498 ↗
57. Scale up and anode development for La-doped SrTiO3 anode-supported SOFCs10.1111/jace.12325 ↗