Simultaneous dual-interface and bulk defect passivation for high-efficiency and stable CsPbI2Br perovskite solar cells
Source abstract
Abstract
Abstract All-inorganic CsPbI2Br is a promising candidate to produce the optimized balance between efficiency and stability. Unfortunately, the CsPbI2Br perovskite films prepared by solution methods often show numerous defects on the grain surfaces and a tendency for phase transition. In this work, we discovered that the proper amount of NiI2 additive enables Ni2+ doping in the perovskite interstitial lattice, while additional Ni2+ ions serve as passivation agents on the grain surfaces; in particular, a profiled distribution appears from the film bulk to both the upper and lower surfaces. The special Ni2+ distribution results in an optimized TiO2 surface for perovskite growth, better perovskite film quality, superior charge extraction capability, and effective suppression of interfacial recombination. As a result, the CsPbI2Br perovskite solar cell (PSC) efficiency is increased to 15.88%, among the highest for its type. Also, the special Ni2+ distribution endows the PSC with improved moisture tolerance. This work provides a promising strategy to overcome the surface/bulk instability issues common in PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. The rapid evolution of highly efficient perovskite solar cells10.1039/C6EE03397K ↗
2. Atomic scale insights into structure instability and decomposition pathway of methylammonium lead iodide perovskite10.1038/s41467-018-07177-y ↗
3. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
4. Addressing the stability issue of perovskite solar cells for commercial applications10.1038/s41467-018-07255-1 ↗
5. Inorganic perovskite solar cells: an emerging member of the photovoltaic community10.1039/C9TA06674H ↗
6. Inorganic CsPbI2Br perovskite solar cells: the progress and perspective10.1002/solr.201800239 ↗
7. Dual interfacial design for efficient CsPbI2Br perovskite solar cells with improved photostability10.1002/adma.201901152 ↗
8. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant?10.1002/anie.201910800 ↗
9. Polar solvent induced lattice distortion of cubic CsPbI3 nanocubes and hierarchical self-assembly into orthorhombic single-crystalline nanowires10.1021/jacs.8b05949 ↗
10. Bifunctional stabilization of all-inorganic alpha-CsPbI3 perovskite for 17% efficiency photovoltaics10.1021/jacs.8b07927 ↗
11. All-inorganic CsPbI2Br perovskite solar cells with high efficiency exceeding 13%10.1021/jacs.7b13229 ↗
12. Low temperature fabrication for high performance flexible CsPbI2Br perovskite solar cells10.1002/advs.201801117 ↗
13. Bandgap-tunable cesium lead halide perovskites with high thermal stability for efficient solar cells10.1002/aenm.201502458 ↗
14. Minimizing voltage loss in efficient all-inorganic CsPbI2Br perovskite solar cells through energy level alignment10.1021/acsenergylett.9b01662 ↗
15. A high mobility conjugated polymer enables air and thermally stable CsPbI2Br perovskite solar cells with an efficiency exceeding 15%10.1002/admt.201900311 ↗
16. Dopant-free squaraine-based polymeric hole-transporting materials with comprehensive passivation effects for efficient all-inorganic perovskite solar cells10.1002/anie.201907331 ↗
17. Controlled n-doping in air-stable CsPbI2Br perovskite solar cells with a record efficiency of 16.79%10.1002/adfm.201909972 ↗
18. Unveiling property of hydrolysis-derived DMAPbI3 for perovskite devices: composition engineering, defect mitigation, and stability optimization10.1016/j.isci.2019.04.024 ↗
19. Additive engineering for efficient and stable perovskite solar cells10.1002/aenm.201902579 ↗
20. Enhanced performance via partial lead replacement with calcium for a CsPbI3 perovskite solar cell exceeding 13% power conversion efficiency10.1039/C7TA11154A ↗
21. Preparation of tortuous 3D γ-CsPbI3 films at low temperature by CaI2 as dopant for highly efficient perovskite solar cells10.1002/adfm.201808986 ↗
22. Tailored phase transformation of CsPbI2Br films by copper(II) bromide for high-performance all-inorganic perovskite solar cells10.1021/acs.nanolett.9b01553 ↗
23. All-inorganic CsPb1−xGexI2Br perovskite with enhanced phase stability and photovoltaic performance10.1002/anie.201807270 ↗
24. Strontium-doped low-temperature-processed CsPbI2Br perovskite solar cells10.1021/acsenergylett.7b00751 ↗
25. Interstitial Mn2+-driven high-aspect-ratio grain growth for low-trap-density microcrystalline films for record efficiency CsPbI2Br solar cells10.1021/acsenergylett.8b00270 ↗
26. Lattice reconstruction of La-incorporated CsPbI2Br with suppressed phase transition for air-processed all-inorganic perovskite solar cells10.1039/C9TC05736F ↗
27. Structurally reconstructed CsPbI2Br perovskite for highly stable and square-centimeter all-inorganic perovskite solar cells10.1002/aenm.201803572 ↗
28. Pb-site doping of lead halide perovskites for efficient solar cells10.1002/solr.201900227 ↗
29. Recent progress of inorganic perovskite solar cells10.1039/C9EE01479A ↗
30. A novel anion doping for stable CsPbI2Br perovskite solar cells with an efficiency of 15.56% and an open circuit voltage of 1.30 V10.1002/aenm.201902279 ↗
31. Interface engineering for all-inorganic CsPbI2Br perovskite solar cells with efficiency over 14%10.1002/adma.201802509 ↗
32. Intermolecular exchange boosts efficiency of air-stable, carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells to over 9%10.1002/aenm.201802080 ↗
33. Highly efficient perovskite solar cells via nickel passivation10.1002/adfm.201804286 ↗
34. 2D Cs2PbI2Cl2 nanosheets for holistic passivation of inorganic CsPbI2Br perovskite solar cells for improved efficiency and stability10.1002/aenm.202002882 ↗
35. Reducing surface halide deficiency for efficient and stable iodide-based perovskite solar cells10.1021/jacs.9b13418 ↗
36. Interstitial occupancy by extrinsic alkali cations in perovskites and its impact on ion migration10.1002/adma.201707350 ↗
37. Dual-protection strategy for high-efficiency and stable CsPbI2Br inorganic perovskite solar cells10.1021/acsenergylett.9b02716 ↗
38. Enhancement of m-cresol hydrodeoxygenation selectivity on Ni catalysts by surface decoration of MoOx species10.1021/acscatal.9b01285 ↗
39. Cluster core-level binding-energy shifts: the role of lattice strain10.1103/PhysRevLett.93.026805 ↗
40. Charge transfer, lattice distortion, and quantum confinement effects in Pd, Cu, and Pd–Cu nanoparticles; size and alloying induced modifications in binding energy10.1063/1.3590272 ↗
41. Understanding catalyst surfaces during catalysis through near ambient pressure X-ray photoelectron spectroscopy10.1021/acs.chemrev.8b00114 ↗
42. Post-treatment-Free solution-processed non-stoichiometric NiOx nanoparticles for efficient hole-transport layers of organic optoelectronic devices10.1002/adma.201405391 ↗
43. Energy-down-shift CsPbCl3:Mn quantum dots for boosting the efficiency and stability of perovskite solar cells10.1021/acsenergylett.7b00375 ↗
44. Simultaneous improved performance and thermal stability of planar metal ion incorporated CsPbI2Br all-inorganic perovskite solar cells based on MgZnO nanocrystalline electron transporting layer10.1002/aenm.201902708 ↗
45. Efficient perovskite solar cells fabricated by Co partially substituted hybrid perovskite10.1002/aenm.201703178 ↗
46. Intermediate phase enhances inorganic perovskite and metal oxide interface for efficient photovoltaics10.1016/j.joule.2020.01.011 ↗
47. Manganese doping mechanism in a CsPbI2Br photovoltaic material: a first-principles study10.1039/C9CP03870A ↗
48. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
49. NbF5: a novel α-phase stabilizer for FA-based perovskite solar cells with high efficiency10.1002/adfm.201807850 ↗
50. 20-mm-Large single-crystalline formamidinium-perovskite wafer for mass production of integrated photodetectors10.1002/adom.201600327 ↗
51. Europium and acetate Co-doping strategy for developing stable and efficient CsPbI2Br perovskite solar cells10.1002/smll.201904387 ↗
52. Precursor engineering for ambient-compatible antisolvent-free fabrication of high-efficiency CsPbI2Br perovskite solar cells10.1002/aenm.202000691 ↗
53. Precursor engineering for all-inorganic CsPbI2Br perovskite solar cells with 14.78% efficiency10.1002/adfm.201803269 ↗