journal article·2019-06Open access

Two-dimensional polythiophene homopolymer as promising hole transport material for high-performance perovskite solar cells

Hsiao-Chi Hsieh, Chuen-Yo Hsiow, Yu-An Su, Yu-Cheng Liu, Wei Chen, Wen-Yen Chiu, Yen-Chen Shih, King-Fu Lin, Leeyih Wang

Abstract

Abstract A polythiophene homopolymer with conjugated side chains (2D-PT) was applied as a hole transport material (HTM) of perovskite solar cells (PSCs). The all-conjugated two-dimensional structure effectively increases the ionization potential, realizing a high open-circuit voltage near 1 V for the 2D-PT-based PSC. Very interestingly, the two-dimensional wide-angle X-ray scattering measurements show that the 2D-PT molecules are self-assembled into ordered structure with a face-on dominant orientation and exhibit a hole mobility, which is ∼1.6 times faster than that of poly(3-hexylthiophene) (P3HT). Consequently, the power conversion efficiency of PSC is noticeably increased by ∼30% as 2D-PT replaces P3HT as HTM. Moreover, the densely packed 2D-PT slows down the moisture induced degradation of perovskite crystals, leading to a better environmental stability. This work demonstrates that two-dimensional non-donor-acceptor structural conjugated polymers can be utilized as promising HTM of PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
2. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
5. Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency10.1039/C3EE43707H ↗
6. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
7. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
8. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
9. Near-infrared-absorbing and dopant-Free heterocyclic quinoid-based hole-transporting materials for efficient perovskite solar cells10.1002/cssc.201600923 ↗
10. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
11. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer10.1021/nl400286w ↗
12. High efficiency perovskite solar cells: from complex nanostructure to planar heterojunction10.1039/C3TA14160H ↗
13. Nanostructured TiO2/CH3NH3PbI3 heterojunction solar cells employing spiro-OMeTAD/Co-complex as hole-transporting material10.1039/c3ta12681a ↗
14. All-solid-state hybrid solar cells based on a new organometal halide perovskite sensitizer and one-dimensional TiO2 nanowire arrays10.1039/c3nr00218g ↗
15. Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells10.1039/c3cc46534a ↗
16. Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells10.1039/c3nr01542d ↗
17. Perovskite solar cells: influence of hole transporting materials on power conversion efficiency10.1002/cssc.201501228 ↗
18. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
19. Investigation of hole-transporting poly(triarylamine) on aggregation and charge transport for hysteresisless scalable planar perovskite solar cells10.1021/acsami.7b18745 ↗
20. Efficiency enhancement of hybrid perovskite solar cells with MEH-PPV hole-transporting layers10.1038/srep34319 ↗
21. Polyfluorene derivatives are high‐performance organic hole‐transporting materials for inorganic−organic hybrid perovskite solar cells10.1002/adfm.201401557 ↗
22. Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques10.1021/nn506864k ↗
23. Perovskite‐based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach10.1002/adma.201304803 ↗
24. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
25. Dopant‐free hole transporting polymers for high efficiency, environmentally stable perovskite solar cells10.1002/aenm.201600502 ↗
26. A Diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic–inorganic hybrid solar cells based on a perovskite10.1039/c3ee44174a ↗
27. High performance hybrid solar cells sensitized by organolead halide perovskites10.1039/c3ee40343b ↗
28. Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells10.1039/C6EE00709K ↗
29. Development of a new benzo(1,2-b:4,5-b')dithiophene-based copolymer with conjugated dithienylbenzothiadiazole–vinylene side chains for efficient solar cells10.1039/c1cc12851e ↗
30. Synthesis and photovoltaic properties of copolymers based on benzo[1,2-b:4,5-b']dithiophene and thiophene with different conjugated side groups10.1021/ma202399n ↗
31. Impact of constitution of the terthiophene–vinylene conjugated side chain on the optical and photovoltaic properties of two-dimensional polythiophenes10.1039/C4CP03382E ↗
32. Kumada catalyst-transfer polycondensation: mechanism, opportunities, and challenges10.1002/marc.201100316 ↗
33. The chemistry of conducting polythiophenes10.1002/(SICI)1521-4095(199801)10:2<93::AID-ADMA93>3.0.CO;2-F ↗
34. Role of the transition metal in Grignard metathesis polymerization (GRIM) of 3-hexylthiophene10.1039/c3ta13258g ↗
35. Patterning of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films via the rubbing method in organic photovoltaic cells
36. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗