journal article·2022-09

Graphene oxide hydrogel electrolyte for improving the performance of electropolymerized polyaniline solar cells

Celia Ferrag, Meissam Noroozifar, Ali Reza Modarresi-Alam, Kagan Kerman

Publisher page

Abstract

In this proof-of-concept study, we reported the incorporation of a graphene oxide hydrogel (GO-gel) electrolyte as the cathode and the electropolymerized aniline (E-PANI) in situ on a titanium oxide (TiO 2 )-coated fluorine-doped tin oxide (FTO) as the anode in an organic solar cell (OSC) for the first time, to the best of our knowledge. Fourier-transform infrared (FT-IR) microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were applied for characterization studies. The incorporation of GO-gel electrolyte within E-PANI significantly enhanced the power conversion efficiency (PCE) by 257.0% compared to the standard E-PANI solar cell with a liquid electrolyte. Under an AM 1.5 G (100 mW/cm 2) illumination, the final OSC (FTO│TiO 2/E-PANI/GO-gel-I -/I 3 −│Al) demonstrated an overall PCE of 4.35% with an open circuit voltage (V oc) of 0.889 V and a short circuit current density (J sc) of 15.13 mA/cm 2 . The photovoltaic properties were found to be superior to those of the previously reported E-PANI-based solar cells. Our preliminary results showed that the rheological properties, PCE and stability were significantly enhanced with the incorporation of GO-gel electrolyte. Thus, GO-gel electrolytes provide a promising platform for the development of high-efficiency photovoltaic devices in the near future.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Role of renewable energy sources in environmental protection: a review10.1016/j.rser.2010.11.037 ↗
2. Development of electrolytes towards achieving safe and high-performance energy-storage devices: a review10.1002/celc.201402277 ↗
3. Carbon black reborn: structure and chemistry for renewable energy harnessing10.1016/j.carbon.2020.02.058 ↗
4. Conjugated polymer-based solar cells
5. Single-layer solar cell based on nanostructure of polyaniline on fluorine-doped tin oxide: a simple, low-cost and efficient FTO│n-PANI│Al cell10.1007/s13738-018-1294-2 ↗
6. Reporting performance in organic photovoltaic devices10.1021/nn402883g ↗
7. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
8. Core-shell nanocomposite of superparamagnetic Fe3O4 nanoparticles with poly(m-aminobenzenesulfonic acid) for polymer solar cells
9. A facile and green synthesis of superparamagnetic Fe3O4@PANI nanocomposite with a core-shell structure to increase of triplet state population and efficiency of the solar cells10.1016/j.jece.2020.104942 ↗
10. Novel conductive multi-walled polymeric nanotubes of poly(diazoaminobenzene) for single-layer polymer solar cell10.1016/j.reactfunctpolym.2020.104529 ↗
11. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
12. Encapsulation of poly(m-aminobenzodioxol)-Fe3O4 superparamagnetic nanorods and iron (III) thiocyanate complex in hydrogel toward hybrid solar cells10.1016/j.jece.2021.105612 ↗
13. Simple and green route for fabrication of a nanostructured of the graphene‐Fe3O4@PANI for the photovoltaic activity10.1016/j.electacta.2021.139327 ↗
14. Electropolymerized polyaniline/graphene nanoplatelet/multi-walled carbon nanotube composites as counter electrodes for high performance dye-sensitized solar cells10.1016/j.jelechem.2017.04.010 ↗
15. Polyaniline/TiO2 solar cells10.1016/j.synthmet.2006.04.001 ↗
16. Al/PANI-MWNT/Au-plastic Schottky diode solar cells
17. Effect of TiO2 thin film morphology on polyaniline/TiO2 solar cell efficiency10.4236/wjnse.2015.52006 ↗
18. Investigation of the electrical conductivity and optical property of polyaniline-based nanocomposite and its application as an ethanol vapor sensor10.1039/C4NJ02260B ↗
19. Quasi-solid-state dye-sensitized solar cell from polyaniline integrated poly(hexamethylene diisocyanate tripolymer/polyethylene glycol) gel electrolyte10.1039/c3ta10224f ↗
20. Layer-by-layer TiO2 films as efficient blocking layers in dye-sensitized solar cells10.1016/j.jphotochem.2009.04.008 ↗
21. Encapsulation of poly(m-aminobenzodioxol)-Fe3O4 superparamagnetic nanorods and iron (III) thiocyanate complex in hydrogel toward hybrid solar cells10.1016/j.jece.2021.105612 ↗
22. Graphene tailored polymer gel electrolytes for 9.1%-efficiency quasi-solid-state dye-sensitized solar cells10.1016/j.jpowsour.2017.03.018 ↗
23. Efficient quasi-solid-state dye-sensitized solar cells employing polyaniline and polypyrrole incorporated microporous conducting gel electrolytes10.1016/j.jpowsour.2013.12.112 ↗
24. Quasi solid-state quantum dot–sensitized solar cells with polysulfide gel polymer electrolyte for superior stability10.1007/s10008-019-04365-8 ↗
25. High-efficiency platinum-free quasi-solid-state dye-sensitized solar cells from polyaniline (polypyrrole)-carbon nanotube complex tailored conducting gel electrolytes and counter electrodes10.1016/j.electacta.2017.12.066 ↗
26. Hydrogel: preparation, characterization, and applications: a review10.1016/j.jare.2013.07.006 ↗
27. Capture and electroreduction of CO2 using highly efficient bimetallic Pd–Ag aerogels paired with carbon nanotubes10.1039/D1TA01834E ↗
28. Hydrogels 2.0: improved properties with nanomaterial composites for biomedical applications10.1088/1748-6041/11/1/014104 ↗
29. Multifunctional graphene incorporated polyacrylamide conducting gel electrolytes for efficient quasi-solid-state quantum dot-sensitized solar cells10.1016/j.jpowsour.2015.03.060 ↗
30. Multifunctional graphene incorporated conducting gel electrolytes in enhancing photovoltaic performances of quasi-solid-state dye-sensitized solar cells10.1016/j.jpowsour.2014.03.034 ↗
31. Conducting gel electrolytes with microporous structures for efficient quasi-solid-state dye-sensitized solar cells10.1016/j.jpowsour.2014.10.019 ↗
32. Cu2S reduced graphene oxide composite for high-efficiency quantum dot solar cells. Overcoming the redox limitations of S2–/Sn2– at the counter electrode10.1021/jz201064k ↗
33. Communication—polyaniline electrodeposition on flexible ITO substrates and the effect of curved electrochemical conditions10.1149/2.0871913jes ↗
34. Electropolymerization of aniline and (N-phenyl-o-phenylenediamine) for glucose biosensor application10.1016/j.matlet.2018.12.012 ↗
35. Polyacrylamide hydrogels doped with different shapes of silver nanoparticles: antibacterial and mechanical properties10.1016/j.colsurfb.2020.111397 ↗
36. Highly elastic and superstretchable graphene oxide/polyacrylamide hydrogels10.1002/smll.201301591 ↗
37. Graphene oxide-incorporated hydrogels for biomedical applications10.1038/s41428-020-0350-9 ↗
38. Full-ionic liquid gel electrolytes: enhanced photovoltaic performances in dye-sensitized solar cells10.1016/j.jpowsour.2014.04.095 ↗
39. The effect of a small amount of water on the structure and electrochemical properties of solid-state synthesized polyaniline10.3390/ma5101811 ↗
40. Polyaniline-coated Fe3O4 nanoparticle-carbon-nanotube composite and its application in electrochemical biosensing10.1002/smll.200701018 ↗
41. Enhancement of photovoltaic performance of polyaniline/graphene composite-based dye-sensitized solar cells by adding TiO2 nanoparticles10.1016/j.solidstatesciences.2018.07.009 ↗
42. Pullulan based porous semi-IPN hydrogel: synthesis, characterization and its application in the removal of mercury from aqueous solution10.1016/j.jtice.2015.01.013 ↗
43. Facile one-pot synthesis of graphene oxide by sonication assisted mechanochemical approach and its surface chemistry10.1166/jnn.2018.14306 ↗
44. Mechanism of a green graphene oxide reduction with reusable potassium carbonate10.1039/C4RA14511A ↗
45. Influence of graphene microstructures on electrochemical performance for supercapacitors10.1016/j.pnsc.2015.10.004 ↗
46. Comparative studies of chemically synthesized polyaniline and poly(o-toluidine) doped with p-toluene sulphonic acid10.1016/j.eurpolymj.2003.10.007 ↗
47. Storage and evolution of hydrogen in acidic medium by polyaniline10.1002/er.3920 ↗
48. Studies on the optical band gap and cluster size of the polyaniline thin films irradiated with swift heavy Si ions10.1016/j.vacuum.2007.03.008 ↗
49. Optical properties of amorphous semiconductors
50. Swift heavy ion irradiation induced modifications in the optical band gap and Urbach's tail in polyaniline nanofibers10.1016/j.nimb.2011.09.004 ↗
51. Atomic force microscopy an unparalleled surface characterisation technique
52. Cu doping concentration effect on the physical properties of CdS thin films obtained by the CBD technique
53. Direct band gap mixed-valence organic-inorganic gold perovskite as visible light absorbers10.1021/acs.chemmater.0c00345 ↗
54. A self-powered UV photodetector based on polyaniline/titania nanocomposite with long-term stability10.1016/j.optmat.2019.05.026 ↗
55. Optical absorption and spectrophotometric studies on the optical constants and dielectric of poly (o-toluidine) (POT) films grown by spin coating deposition10.1016/j.physb.2012.03.034 ↗
56. Band gap study of polyaniline and polyaniline/MWNT nanocomposites with in situ polymerization method10.1016/j.compositesb.2016.04.032 ↗
57. Theory of the impedance of electron diffusion and recombination in a thin layer10.1021/jp011941g ↗
58. Enhanced power conversion efficiency in bulk heterojunction solar cell based on new polyazomethine with vinylene moieties and [6,6]-phenyl C61 butyric acid methyl ester by adding 10-camphorsulfonic acid10.1016/j.electacta.2015.01.215 ↗
59. Impedance investigation of the highly efficient polymer solar cells with composite CuBr2/MoO3 hole transport layer10.1039/C7CP03595K ↗
60. Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopy10.1016/j.solmat.2009.10.015 ↗
61. Electrochemical impedance spectra for the complete equivalent circuit of diffusion and reaction under steady-state recombination current10.1039/B401234H ↗
62. In situ characterization of lifetime and morphology in operating bulk heterojunction organic photovoltaic devices by impedance spectroscopy10.1002/aenm.201100357 ↗
63. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
64. Electrochemical and photocurrent characterization of polymer solar cells with improved performance after GO addition to the PEDOT:PSS hole transporting layer10.1016/j.solener.2017.02.032 ↗
65. Chemical capacitance of nanostructured semiconductors: its origin and significance for nanocomposite solar cells10.1039/b310907k ↗
66. Cyclic voltammetry of polyaniline: interpretation of the middle peak10.1016/0022-0728(88)80351-6 ↗
67. Polyaniline, a novel conducting polymer. Morphology and chemistry of its oxidation and reduction in aqueous electrolytes
68. Conducting polyaniline nanowire and its applications in chemiresistive sensing10.3390/nano3030498 ↗
69. The blue-shift of photoluminescence spectra of zinc complexes of 8-hydroxyquinoline by addition of ZnO nanoparticles10.1007/s11664-017-5956-0 ↗
70. A new polymer electron acceptor based on thiophene-S,S-dioxide unit for organic photovoltaics10.1002/marc.201700505 ↗
71. Fabrication of benzothiadiazole-benzodithiophene-based random copolymers for efficient thick-film polymer solar cells: via a solvent vapor annealing approach10.1039/C8TC00553B ↗
72. Single-layer solar cell based on nanostructure of polyaniline on fluorine-doped tin oxide: a simple, low-cost and efficient FTO│n-PANI│Al cell10.1007/s13738-018-1294-2 ↗
73. Modeling of high-efficiency multi-junction polymer and hybrid solar cells to absorb infrared light10.3390/polym11020383 ↗
74. Charge generation in organic photovoltaics: a review of theory and computation10.1039/C6ME00005C ↗
75. A simple approach of enhancing photovoltaic performances of quasi-solid-state dye-sensitized solar cells by integrating conducting polyaniline into electrical insulating gel electrolyte10.1016/j.jpowsour.2013.07.006 ↗
76. A graphene oxide modified carbon ceramic electrode for voltammetric determination of gallic acid10.1016/j.diamond.2018.07.012 ↗
77. Functionalized thermoplastic polyurethane as hole conductor for quantum dot-sensitized solar cell10.1021/acsaem.8b00783 ↗
78. Graphene: regulatory considerations for the wonder material
79. Superhydrophobic to superhydrophilic wetting control in graphene films10.1002/adma.200903696 ↗
80. Carbon nanotubes and graphene towards soft electronics10.1186/s40580-014-0015-5 ↗
81. CSA-doped PANI/TiO2 hybrid BHJ solar cells – material synthesize and device fabrication10.1016/j.mssp.2016.05.006 ↗
82. Development of a colorimetric pH indicator based on bacterial cellulose nanofibers and red cabbage (Brassica oleraceae) extract10.1016/j.carbpol.2016.09.027 ↗
83. Improved power conversion efficiency of P3HT:PCBM organic solar cells by strong spin-orbit coupling-induced delayed fluorescence10.1002/aenm.201401770 ↗
84. Carbon nanoparticles as an interfacial layer between TiO2-coated ZnO nanorod arrays and conjugated polymers for high-photocurrent hybrid solar cells10.1039/c3ra42614a ↗
85. An investigation into the photovoltaic activity of a new nanocomposite of (polyaniline nanofibers)/(titanium dioxide nanoparticles) with different architectures10.1016/j.synthmet.2019.04.007 ↗
86. Synthesis and characterization of poly(p-aminoazobenzene) nanosheet as a new derivative of polyaniline containing azo groups under green chemistry condition and its high efficiency in solar cell10.1016/j.synthmet.2019.116115 ↗
87. Synthesis of a polyacrylamide hydrogel using CO 2 at room temperature, Can
88. Bair · 2012
89. Polyacrylamide hydrogels for cell mechanics: steps toward optimization and alternative uses10.1016/S0091-679X(07)83002-0 ↗
90. Exploring the role of nanoparticles in enhancing mechanical properties of hydrogel nanocomposites10.3390/nano8110882 ↗
91. Rheological properties of peptide-based hydrogels for biomedical and other applications10.1039/b919449p ↗
92. Graphene oxide-incorporated hydrogels for biomedical applications10.1038/s41428-020-0350-9 ↗
93. Effect of multiwalled carbon nanotube-grafted polymer brushes on the mechanical and swelling properties of polyacrylamide composite hydrogels10.1016/j.polymer.2016.01.025 ↗
94. Electrically conductive graphene/polyacrylamide hydrogels produced by mild chemical reduction for enhanced myoblast growth and differentiation10.1016/j.actbio.2016.10.035 ↗
95. Graphene hybrid materials? the role of graphene materials in the final structure of hydrogels10.1039/C8NR09728C ↗
96. Controlling mechanical properties of cell-laden hydrogels by covalent incorporation of graphene oxide10.1002/smll.201302182 ↗
97. Copper indium gallium selenide solar cells10.1016/B978-0-323-85529-7.00001-3 ↗