journal article·2021-09

The analysis of parameter uncertainty on performance and reliability of photovoltaic cells

Feng Zhang, Mingying Wu, Xinting Hou, Cheng Han, Xinhe Wang, Zhongbing Liu

Publisher page

Abstract

Abstract In engineering practice, the parameters affecting the output of a photovoltaic cell such as its irradiation intensity, surface temperature, current temperature coefficient, series resistance, parallel resistance, and ideality factor each inevitably possess a degree of uncertainty. Based on a photovoltaic cell model, this study uses the quasi-Monte Carlo method to model the randomness of these parameters, then discusses the influence of the uncertainty of each parameter on the output power performance, stability, and reliability. The results show that a high current temperature coefficient is beneficial to the average output power and fill factor. The smaller the series resistance and the greater the parallel resistance, the greater the mean and standard deviation of the output power and fill factor. In a normal working environment, the lower the average surface temperature, the higher the mean output power and fill factor, and the smaller the standard deviation of the output power. Finally, optimal values of the ideality factor and radiation intensity are found to exist for the mean output power. The research in this paper expands the performance evaluation standards of photovoltaic cells and provides a theoretical and technical basis for the optimization of photovoltaic cell designs that accounts for parameter randomness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Photovoltaic System Optimization Techniques · Advanced Multi-Objective Optimization Algorithms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Electrical power crisis solution by the developing renewable energy based power generation expansion10.1016/j.egyr.2019.11.106 ↗
2. Recent progress in renewable energy – remedy of energy crisis in Pakistan10.1016/j.rser.2014.01.089 ↗
3. Nanostructured photoanode and counter electrode materials for efficient Dye-Sensitized Solar Cells (DSSCs)10.1016/j.solener.2019.04.057 ↗
4. Polyaniline/graphene nanocomposites as counter electrode materials for platinum free dye-sensitized solar cells (DSSCSs)10.1016/j.matlet.2019.126651 ↗
5. A review of installed solar photovoltaic and thermal collector capacities in relation to solar potential for the EU-1510.1016/j.renene.2008.05.025 ↗
6. Development, analysis and assessment of fuel cell and photovoltaic powered vehicles10.1016/j.ijhydene.2017.05.065 ↗
7. Numerical evaluation on energy saving potential of the photovoltaic fresh air preheating system in different climate regions of China10.1016/j.applthermaleng.2019.03.108 ↗
8. Architectural quality of the productive façades integrating photovoltaic and vertical farming systems: survey among experts in Singapore10.1016/j.foar.2019.12.005 ↗
9. Design scheme for fast charging station for electric vehicles with distributed photovoltaic power generation10.1016/j.gloei.2019.07.003 ↗
10. Organic photovoltaic cells for low light applications offering new scope and orientation10.1016/j.orgel.2020.105798 ↗
11. Solar and wind energy production in relation to the electricity load curve and hydroelectricity in the northeast region of Brazil10.1016/j.rser.2013.01.050 ↗
12. Robust design optimization of a photovoltaic-battery-heat pump system with thermal storage under aleatory and epistemic uncertainty10.1016/j.energy.2021.120692 ↗
13. Multi-objective robust optimization of active distribution networks considering uncertainties of photovoltaic10.1016/j.ijepes.2021.107197 ↗
14. I-V and P-V characteristics analysis of a photovoltaic module by different methods using Matlab software
15. A simplified simulation model of silicon photovoltaic modules for performance evaluation at different operating conditions10.1016/j.ijleo.2020.164228 ↗
16. An enhanced adaptive differential evolution algorithm for parameter extraction of photovoltaic models10.1016/j.enconman.2019.112443 ↗
17. Parameters identification of photovoltaic cells and modules using diversification-enriched Harris hawks optimization with chaotic drifts10.1016/j.jclepro.2019.118778 ↗
18. Simple and efficient estimation of photovoltaic cells and modules parameters using approximation and correction technique[J]10.1371/journal.pone.0216201 ↗
19. Post-buckling reliability analysis of stiffened composite panels based on adaptive iterative sampling
20. Treatment of uncertainty in performance assessments for complex systems10.1111/j.1539-6924.1994.tb00266.x ↗
21. Assessment and propagation of model uncertainty10.1111/j.2517-6161.1995.tb02015.x ↗
22. Latin hypercube sampling and the propagation of uncertainty in analyses of complex systems10.1016/S0951-8320(03)00058-9 ↗
23. A comparative study of uncertainty propagation methods for black-box-type problems10.1007/s00158-008-0234-7 ↗
24. Assessment of randomized Quasi-Monte Carlo method efficiency in radiative heat transfer simulations10.1016/j.jqsrt.2019.07.013 ↗
25. Mechanism reliability and sensitivity analysis method using truncated and correlated normal variables10.1016/j.ssci.2020.104615 ↗
26. Monte Carlo based uncertainty analysis: sampling efficiency and sampling convergence10.1016/j.ress.2012.08.003 ↗
27. Quasi-Monte Carlo based uncertainty analysis: sampling efficiency and error estimation in engineering applications10.1016/j.ress.2019.106549 ↗
28. Rubinstein RY, Kroese DP. Simulation and the Monte Carlo Method [M]//Simulation and the Monte Carlo method.
29. Performance analysis of two-stage thermoelectric generator model based on Latin hypercube sampling10.1016/j.enconman.2020.113159 ↗
30. Randomized Halton sequences10.1016/S0895-7177(00)00178-3 ↗
31. Surhone · 2010
32. Error in Monte Carlo, quasi-error in quasi-Monte Carlo10.1016/j.cpc.2006.02.001 ↗
33. Assessment of randomized Quasi-Monte Carlo method efficiency in radiative heat transfer simulations10.1016/j.jqsrt.2019.07.013 ↗
34. A quasi-Monte Carlo solver for thermal radiation in participating media10.1016/j.jqsrt.2019.106753 ↗
35. Quasi-Monte-Carlo-based probabilistic assessment of wall heat loss10.1016/j.egypro.2017.10.010 ↗
36. Quasi-Monte Carlo simulation of coagulation–fragmentation10.1016/j.matcom.2019.02.003 ↗
37. Optimal multilevel randomized quasi-Monte-Carlo method for the stochastic drift–diffusion-Poisson system10.1016/j.cma.2017.10.015 ↗
38. A quasi-static Monte Carlo algorithm for the simulation of sub-prompt critical transients10.1016/j.anucene.2018.11.055 ↗