Improving oxygen incorporation rate on (La0.6Sr0.4)0.98FeO3-δ via Pr2Ni1-xCuxO4+δ surface decoration
Source abstract
Abstract
Abstract Insufficient electrocatalytic activity for oxygen reduction/evolution in lanthanum strontium ferrite (LSF) perovskites at temperatures below 700 °C, limits the utilization of these Co-free oxides as oxygen electrodes for intermediate-temperature solid oxide fuel/electrolysis cells (SOFC/SOEC). Marked performance improvement is here reported by decorating the surface with Pr2Ni1-xCuxO4 catalyst particles. Infiltrating porous LSF electrodes with aqueous nitrates solutions containing Pr, Ni and Cu, targeting the compositions Pr2Ni0.7Cu0.3O4 and Pr2Ni0.6Cu0.4O4, significantly reduces the polarization resistance at 650 °C from 0.98 Ω cm2 to 0.16 Ω cm2 and 0.13 Ω cm2 respectively. Electrical Conductivity Relaxation (ECR) measurements reveal that surface exchange rates, expressed by (kchem), are much more stable in week long aging experiments for Pr2Ni0.7Cu0.3O4 surface decorated LSF bars compared to the bare LSF. This shows that a Pr2Ni1-xCuxO4 infiltrated porous LSF backbone can be an efficient Co-free oxygen electrode for intermediate-temperature SOFC/SOEC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Advances in cathode materials for solid oxide fuel cells: complex oxides without alkaline earth metal elements10.1002/aenm.201500537 ↗
2. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
3. Chromium deposition and poisoning of cathodes of solid oxide fuel cells10.1016/j.ijhydene.2013.10.042 ↗
4. Understanding degradation of solid oxide electrolysis cells through modeling of electrochemical potential profiles10.1016/j.electacta.2015.12.067 ↗
5. Comparison between La0.6Sr0.4CoO3-d and LaNi0.6Co0.4O3-d infiltrated oxygen electrodes for long-term durable solid oxide fuel cells10.1016/j.electacta.2018.02.022 ↗
6. Impedance of porous IT-SOFC LSCF:CGO composite cathodes10.1016/j.electacta.2011.05.042 ↗
7. Effect of low temperature in-situ sintering on the impedance and the performance of intermediate temperature solid oxide fuel cell cathodes10.1016/j.jpowsour.2013.06.067 ↗
8. Surface recrystallization – an underestimated phenomenon affecting oxygen exchange activity10.1039/C9TA02607J ↗
9. Model for solid oxide fuel cell cathodes prepared by infiltration10.1016/j.electacta.2017.01.088 ↗
10. La-doped BaFeO3-δ perovskite as a cobalt-free oxygen reduction electrode for solid oxide fuel cells with oxygen-ion conducting electrolyte10.1039/c2jm31711g ↗
11. Materials development for intermediate-temperature solid oxide electrochemical devices10.1007/s10853-011-6213-1 ↗
12. Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review II. Electrochemical behavior vs. materials science aspects10.1007/s10008-008-0611-6 ↗
13. Oxygen diffusion in solid oxide fuel cell cathode and electrolyte materials: mechanistic insights from atomistic simulations
14. La2NiO4+δ infiltrated into gadolinium doped ceria as novel solid oxide fuel cell cathodes: electrochemical performance and impedance modeling10.1016/j.jpowsour.2015.06.077 ↗
15. Preparation and characterization of Pr2NiO4+δ infiltrated into Gd-doped ceria as SOFC cathode10.1007/s10008-016-3211-x ↗
16. Design of La2-xPrxNiO4+δ SOFC cathodes: a compromise between electrochemical performance and thermodynamic stability10.1039/C6TA08011A ↗
17. Properties of La2-xPrxNiO4 cathode for intermediate-temperature solid oxide fuel cells10.2109/jcersj2.119.246 ↗
18. Influence of La/Pr ratio on the ageing properties of La2-xPrxNiO4+δ as cathodes in IT-SOFCs10.1149/06801.0825ecst ↗
19. Cathode property and thermal stability of Pr and Nd mixed Ni-based Ruddlesden-popper oxide for low-temperature operating solid oxide fuel cell10.1016/j.matlet.2014.08.041 ↗
20. Study of Pr and Pr and Co doped La2NiO4+δ as cathodes for La5.5WO11.25-δ based protonic conducting fuel cells10.1016/j.jpowsour.2013.05.055 ↗
21. Mixed conductivity and oxygen permeability of doped Pr2NiO4-based oxides10.1149/1.2387103 ↗
22. Electrode properties of doped Pr2NiO4-based oxide cathode for intermediate-temperature SOFCs10.2109/jcersj2.120.534 ↗
23. Role of Ga3+ and Cu2+ in the high interstitial oxide-ion diffusivity of Pr2NiO4-based oxides: design concept of interstitial ion conductors through the higher-valence d10 dopant and Jahn-Teller effect10.1021/cm3021287 ↗
24. The Jahn-Teller effect in solids10.1016/S0081-1947(08)60218-0 ↗
25. Crystal structure, diffusion path, and oxygen permeability of a Pr2NiO4-based mixed conductor (Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ10.1021/ja909820h ↗
26. Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers10.1038/nenergy.2015.14 ↗
27. Improving La0.6Sr0.4Co0.2Fe0.8O3-δ cathode performance by infiltration of a Sm0.5Sr0.5CoO3-δ coating10.1016/j.ssi.2009.06.014 ↗
28. High performance La2NiO4+δ-infiltrated (La0.6Sr0.4)0.995Co0.2Fe0.8O3-δ cathode for solid oxide fuel cells10.1016/j.jpowsour.2014.06.132 ↗
29. La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells10.1016/j.jpowsour.2010.02.049 ↗
30. Enhanced performance of LSCF cathode through surface modification10.1016/j.ijhydene.2012.02.139 ↗
31. Efficient electro-catalysts for enhancing surface activity and stability of SOFC cathodes10.1002/aenm.201200984 ↗
32. Ca and in co-doped BaFeO3-δ as a cobalt-free cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2016.05.089 ↗
33. Oxygen nonstoichiometry and transport properties of strontium substituted lanthanum ferrite10.1016/j.jssc.2007.02.012 ↗
34. Oxygen exchange and diffusion coefficients of strontium-doped lanthanum ferrites by electrical conductivity relaxation10.1149/1.1837531 ↗
35. A-site deficiency, phase purity and crystal structure in lanthanum strontium ferrite powders10.1016/j.ssi.2007.06.011 ↗
36. Nonstoichiometry and defect structure of the perovskite-type oxides La1-xSrxFeO3-δ10.1016/0022-4596(85)90243-9 ↗
37. Performance improvement of an inhomogeneous cathode by infiltration10.1002/fuce.201600115 ↗
38. Oxygen exchange and transport in (La0.6Sr0.4)0.98FeO3-d-Ce0.9Gd0.1O1.95 dual-phase composites10.1149/2.1031803jes ↗
39. Oxygen exchange kinetics of La0.58Sr0.4Co0.2Fe0.8O3 at 600 °C in dry and humid atmospheres10.1016/j.ssi.2011.03.019 ↗
40. Improving electrochemical performance of lanthanum strontium ferrite by decorating instead of doping cobaltite10.1016/j.electacta.2017.02.014 ↗
41. Rietveld texture analysis from diffraction images10.1524/zksu.2007.2007.suppl_26.125 ↗
42. Samson · 2012
43. High performance cathodes for solid oxide fuel cells prepared by infiltration of La0.6Sr0.4CoO3-δ into Gd-doped ceria10.1149/1.3571249 ↗
44. Koch
45. Oxygen exchange kinetics of La0.4Sr0.6FeO3-δ by simultaneous application of conductivity relaxation and carrier gas coulometry10.1016/j.ssi.2003.12.045 ↗
46. Effects of surface coatings on the determination of Dchem and kchem in La2NiO4+δ by conductivity relaxation10.1016/j.ssi.2011.11.011 ↗
47. Measuring oxygen diffusion and oxygen surface exchange by conductivity relaxation10.1016/S0167-2738(00)00554-3 ↗
48. Crank · 1975
49. Evaluation of Ln2CuO4 (Ln: La, Pr, Nd) oxides as cathode materials for IT-SOFCs10.1016/j.materresbull.2012.08.072 ↗
50. Electrochemical characterization of Pr2CuO4 cathode for IT-SOFC10.1016/j.ijhydene.2012.09.099 ↗
51. Electrochemical characterization of Pr2CuO4-Ce0.9Gd0.1O1.95 composite cathodes for solid oxide fuel cells10.1016/j.jallcom.2014.03.179 ↗
52. Electrochemical investigation of Pr2CuO4-based composite cathode for intermediate-temperature solid oxide fuel cells10.1016/j.jallcom.2016.05.320 ↗
53. Synthesis of Pr2CuO4 powders by using a glycin-nitrate combustion method for cathode application in intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2015.03.182 ↗
54. Compatibility of Praseodymium Nickelates with various cathode current collectors and electrolytes10.1149/05701.1761ecst ↗
55. Oxygen electrode characteristic of Pr2NiO4+δ-infiltrated porous (La0.9Sr0.1)(Ga0.8Mg0.2)O3-δ10.1016/j.ssi.2015.03.030 ↗
56. Oxygen nonstoichiometry, thermo-chemical stability and lattice expansion of La0.6Sr0.4FeO3-δ10.1016/j.ssi.2011.05.013 ↗
57. Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ as cathode material for CeO2-based intermediate-temperature solid oxide fuel cell10.1016/j.ceramint.2013.12.074 ↗
58. The phase stability of the Ruddlesden-Popper type oxide (Pr0.9La0.1)2.0Ni0.74Cu0.21Ga0.05O4+δ in an oxidizing environment10.1016/j.memsci.2015.09.026 ↗
59. Pr1.8La0.2Ni0.74Cu0.21Ga0.05O4+δ as a potential cathode material with CO2 resistance for intermediate temperature solid oxide fuel cell10.1016/j.ijhydene.2013.06.073 ↗
60. Synergy effects of Pr1.91Ni0.71Cu0.24Ga0.05O4 and Ba0.5La0.5CoO3 composite on cathodic activity for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.11.089 ↗
61. An efficient hierarchical nanostructured Pr6O11 electrode for solid oxide fuel cells10.1039/C8TA00190A ↗
62. Ceria doped with praseodymium instead of gadolinium as efficient interlayer for lanthanum nickelate SOFC oxygen electrode10.1016/j.electacta.2017.02.019 ↗
63. Diffusion and conversion impedance in solid oxide fuel cells, Electrochim
64. Limitations of charge-transfer models for mixed-conducting oxygen electrodes10.1016/S0167-2738(00)00423-9 ↗
65. A comparative study on electrochemical behavior of (La,Sr)FeO3 and (La,Sr)FeO3-(La,Sr)MnO3 anodes for solid oxide electrolysis cells10.4028/www.scientific.net/AMM.302.128 ↗
66. Enhanced activity of Pr6O11 and CuO infiltrated Ce0.9Gd0.1O2 based composite oxygen electrodes10.1149/1945-7111/ab6821 ↗
67. Improving oxygen electrodes by infiltration and surface decoration10.1149/09101.1413ecst ↗
68. Electrochemical performance of novel cobalt-free perovskite SrFe0.7Cu0.3O3-δ cathode for intermediate temperature solid oxide fuel cells10.1016/j.electacta.2014.10.137 ↗
69. Cathodic polarization phenomena of perovskite oxide electrodes with stabilized zirconia10.1149/1.2100267 ↗
70. Cobalt-free perovskite BaFe0.85Cu0.15O3-δ cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.ijhydene.2016.01.071 ↗
71. Determination of electrode oxygen transport kinetics using electrochemical impedance spectroscopy combined with three-dimensional microstructure measurement: application to Nd2NiO4+δ10.1149/2.0521414jes ↗
72. New mechanistic insight into the oxygen reduction reaction on Ruddlesden-Popper cathodes for intermediate-temperature solid oxide fuel cells10.1039/C6CP00056H ↗
73. Influence of oxygen partial pressure on the oxygen diffusion and surface exchange coefficients in mixed conductors10.1016/j.jeurceramsoc.2018.03.034 ↗
74. Influence of annealing at intermediate temperature on oxygen transport kinetics of Pr2NiO4+δ10.1039/C7TA08885J ↗
75. Importance of the surface exchange kinetics as rate limiting step in oxygen permeation through mixed-conducting oxides10.1016/0167-2738(94)90145-7 ↗
76. Oxygen permeation modelling of perovskites10.1016/0167-2738(93)90419-4 ↗
77. How to get mechanistic information from partial pressure-dependent current-voltage measurements of oxygen exchange on mixed conducting electrodes10.1021/acs.chemmater.8b00597 ↗
78. The current-voltage characteristics and partial pressure dependence of defect controlled electrochemical reactions on mixed conducting oxides10.1149/2.1031912jes ↗
79. Functional nanoceramics for intermediate temperature solid oxide fuel cells and oxygen separation membranes10.1016/j.jeurceramsoc.2013.01.007 ↗