Highly dense perovskite electrolyte with a high Li+ conductivity for Li–ion batteries
Source abstract
Abstract
Abstract A solid Li+ electrolyte, which has a high Li+ conductivity at 25 °C and a high density, is required in rechargeable Li–ion batteries including all–solid–state Li–metal batteries and Li–redox flow batteries. Here we prepare a fast cubic perovskite Li+ conductor, Li3/8Sr7/16Ta3/4Hf1/4O3 (LSTH), by reducing the grain boundary resistance with spark plasma sintering. The influence of the sintering temperature and time on the relative density and the total Li+ conductivity of Li3/8Sr7/16Ta3/4Hf1/4O3 are investigated; the LSTH pellets sintered by SPS at 1250 °C for 10 min has a much higher density (96.5%), a higher Li+ conductivity (5.2 × 10−4 S cm−1) at 25 °C and a lower activation energy (0.33 eV) than the Li3/8Sr7/16Ta3/4Hf1/4O3 pellet fired with conventional sintering. The symmetric Li/Li cell with a LSTH membrane, which is coated by a thin Li+–conducting solid polymer to avoid the chemical reduction of Li3/8Sr7/16Ta3/4Hf1/4O3 by a metallic lithium anode and to homogenize the current density at Li/electrolyte interface, shows a stable cycling at 0.3 mA cm−2; the all–solid–state Li/LiFePO4 battery and the Li–S cell with Li3/8Sr7/16Ta3/4Hf1/4O3 membranes show a high coulombic efficiency and a good cycling life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Lithium–sulfur batteries: progress and prospects10.1002/adma.201405115 ↗
3. Recent progress in aqueous lithium-ion batteries10.1002/aenm.201200065 ↗
4. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries10.1002/adma.201705702 ↗
5. Building better batteries10.1038/451652a ↗
6. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
7. A Gibeon meteorite yields a high-performance water oxidation electrocatalyst10.1039/C6EE02375D ↗
8. Fluorine-doped antiperovskite electrolyte for all-solid-state lithium-ion batteries10.1002/anie.201604554 ↗
9. Optimizing Li+ conductivity in a garnet framework10.1039/c2jm31413d ↗
10. Lithium ion-conducting glass-ceramics of Li1. 5Al0. 5Ge1. 5(PO4)3–xLi2O (x=0.0–0.20) with good electrical and electrochemical properties10.1111/j.1551-2916.2007.01827.x ↗
11. Mastering the interface for advanced all-solid-state lithium rechargeable batteries10.1073/pnas.1615912113 ↗
12. Mechanical properties of the solid Li-ion conducting electrolyte: Li0.33La0.57TiO310.1007/s10853-012-6500-5 ↗
13. Effect of sintering temperature on microstructure and transport properties of Li3xLa2/3−xTiO3 with different lithium contents10.1016/j.electacta.2010.06.031 ↗
14. Synthesis and lithium-ion conductivity for perovskite-type Li3/8Sr7/16Ta3/4Zr1/4O3 solid electrolyte by powder-bed sintering10.1016/j.ssi.2014.04.005 ↗
15. Stable lithium-ion conducting perovskite lithium–strontium–tantalum–zirconium–oxide system10.1016/j.ssi.2004.01.008 ↗
16. Effect of composition on lithium-ion conductivity for perovskite-type lithium–strontium–tantalum–zirconium-oxide solid electrolytes10.1016/j.ceramint.2015.12.133 ↗
17. Synthesis and characterization of perovskite-type (Li, Sr)(Zr, Nb)O3 quaternary solid electrolyte for all-solid-state batteries10.1016/j.jpowsour.2015.12.065 ↗
18. Li-ion conduction and stability of perovskite Li3/8Sr7/16Hf1/4Ta3/4O310.1021/acsami.6b03070 ↗
19. A perovskite electrolyte that is stable in moist air for lithium-ion batteries10.1002/anie.201804114 ↗
20. Influence of sintering additives on Li+ conductivity and electrochemical property of perovskite-type Li3/8Sr7/16Hf1/4Ta3/4O310.1016/j.electacta.2017.03.041 ↗
21. Influence of sintering aids and excess Lithium on the conductivity of perovskite-type Li3/8Sr7/16Zr1/4Nb3/4O3 solid electrolyte10.1016/j.ceramint.2017.01.097 ↗
22. Design principles for solid-state lithium superionic conductors10.1038/nmat4369 ↗
23. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
24. Consolidation–microstructure–property relationships in bulk nanoceramics and ceramic nanocomposites: a review10.1179/174328007X160281 ↗
25. Spark plasma sintered/synthesized dense and nanostructured materials for solid-state Li-ion batteries: overview and perspective10.1016/j.jpowsour.2013.09.010 ↗
26. An explanation of the microcrack formation in Li1.3Al0.3Ti1.7(PO4)3 ceramics10.1016/j.jeurceramsoc.2016.02.042 ↗
27. Improvement of Li ion conductivity of Li5La3Ta2O12 solid electrolyte by substitution of Ge for Ta10.1016/j.jpowsour.2017.03.032 ↗
28. On the preparation of bio-, nano-and structural ceramics and composites by spark plasma sintering10.1016/S1293-2558(02)00086-9 ↗
29. Garnet electrolyte with an ultralow interfacial resistance for Li-metal batteries10.1021/jacs.8b03106 ↗
30. Plating a dendrite-free lithium anode with a polymer/ceramic/polymer sandwich electrolyte10.1021/jacs.6b05341 ↗