journal article·2015-04

Room-temperature preparation of trisilver-copper-sulfide/polymer based heterojunction thin film for solar cell application

Yan Lei, Xiaogang Yang, Longyan Gu, Huimin Jia, Suxiang Ge, Pin Xiao, Xiaoli Fan, Zhi Zheng

Publisher page

Abstract

Abstract Solar cells devices based on inorganic/polymer heterojunction can be a possible solution to harvest solar energy and convert to electric energy with high efficiency through a cost-effective fabrication. The solution-process method can be easily used to produce large area devices. Moreover, due to the intrinsic different charge separation, diffusion or recombination in various semiconductors, the interfaces between each component may strongly influence the inorganic/polymer heterojunction performance. Here we prepared a n-type Ag 3 CuS 2 (Eg = 1.25 eV) nanostructured film through a room-temperature element reaction process, which was confirmed as direct bandgap semiconductor through density function theory simulation. This Ag 3 CuS 2 film was spin-coated with an organic semiconducting poly(3-hexythiophene) (P3HT) or polythieno[3,4-b]-thiophene-co-benzodithiophene (PTB7) film, which formed an inorganic/polymer heterojunction. After constructing it to a solar cell device, the power conversion efficiencies of 0.79% and 0.31% were achieved with simulated solar illumination on Ag 3 CuS 2 /P3HT and Ag 3 CuS 2 /PTB7, respectively. A possible mechanism was discussed and we showed the charge separation at interface of inorganic and polymer semiconductors played an important role.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The artificial leaf10.1021/ar2003013 ↗
2. Solar water splitting cells10.1021/cr1002326 ↗
3. Laser etch back process to fabricate highly efficient selective emitter c-Si solar cells10.1016/j.solener.2014.08.022 ↗
4. Addressing the terawatt challenge: scalability in the supply of chemical elements for renewable energy10.1039/c2ra20839c ↗
5. HITTM cells—high-efficiency crystalline Si cells with novel structure10.1002/1099-159X(200009/10)8:5<503::AID-PIP347>3.0.CO;2-G ↗
6. Thin-film silicon solar cell technology10.1002/pip.533 ↗
7. Synthesis of CuInS2, CuInSe2, and Cu(InxGa1-x)Se2 (CIGS) nanocrystal “inks” for printable photovoltaics10.1021/ja805845q ↗
8. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
9. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
10. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
11. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
12. Charge formation, recombination, and sweep-out dynamics in organic solar cells10.1002/adfm.201101632 ↗
13. The effect of ageing on exciton dynamics, charge separation, and recombination in P3HT/PCBM photovoltaic blends10.1002/adfm.201101923 ↗
14. Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture10.1021/ar9000923 ↗
15. Conjugated polymer-inorganic semiconductor hybrid solar cells10.1039/c0ee00632g ↗
16. Recent progress in organic-inorganic hybrid solar cells10.1039/c3ta11200d ↗
17. Flexible photovoltaic technologies10.1039/c3tc32197e ↗
18. Heterojunction photovoltaics using GaAs nanowires and conjugated polymers10.1021/nl1030166 ↗
19. Copper-diffused AgInS2 ternary nanocrystals in hybrid bulk-heterojunction solar cells: near-infrared active nanophotovoltaics10.1021/am400322a ↗
20. Sb2Se3-sensitized inorganic-organic heterojunction solar cells fabricated using a single-source precursor10.1002/anie.201308331 ↗
21. High-performance nanostructured inorganic-organic heterojunction solar cells10.1021/nl101322h ↗
22. Solution processed polymer-inorganic semiconductor solar cells employing Sb2S3 as a light harvesting and electron transporting material10.1002/aenm.201300017 ↗
23. Cu2ZnSnS4 (CZTS) nanoparticle based nontoxic and earth-abundant hybrid pn-junction solar cells10.1039/c2cp41062a ↗
24. Hybrid solar cells with outstanding short-circuit currents based on a room temperature soft-chemical strategy: the case of P3HT: Ag2S10.1021/ja307521t ↗
25. Phase relations, ionic transport and diffusion in the alloys of Cu2S-Ag2S mixed conductors10.1007/BF02375484 ↗
26. Synthesis and ammonia sensing property of Ag3CuS2 nanocages obtained from Cu7S4 18-facet hollow nanopolyhedra10.1016/j.jcrysgro.2009.03.038 ↗
27. Charge carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness10.1039/c3ta12358h ↗
28. Effect of BiVO4 crystalline phases on the photoinduced carriers behavior and photocatalytic activity10.1021/jp206798d ↗
29. A very facile, low temperature, one-step route to in situ fabricate copper sulfide nanosheet thin films10.1039/c1ce05682d ↗
30. From nanoplates to microtubes and microrods: a surfactant-free rolling mechanism for facile fabrication and morphology evolution of Ag2S films10.1002/chem.201100537 ↗
31. Physical and electrochemichromic properties of rf sputtered tungsten oxide films10.1063/1.332754 ↗
32. Guidelines for the bandgap combinations and absorption windows for organic tandem and triple-junction solar cells10.3390/ma5101933 ↗
33. Accurate defect levels obtained from the HSE06 range-separated hybrid functional10.1103/PhysRevB.81.153203 ↗
34. Surface photovoltage phenomena: theory, experiment, and applications10.1016/S0167-5729(99)00002-3 ↗
35. Unexpected hole transfer leads to high efficiency single-walled carbon nanotube hybrid photovoltaic10.1021/nl103879b ↗
36. Solar cell device physics
37. Consequences of anode interfacial layer deletion. HCl-Treated ITO in P3HT: PCBM-based bulk-heterojunction organic photovoltaic devices10.1021/la902879h ↗
38. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
39. Conduction and valence band positions of Ta2O5, TaON, and Ta3N5 by UPS and electrochemical methods10.1021/jp027593f ↗
40. Improved open-circuit voltage in polymer/oxide-nanoarray hybrid solar cells by formation of homogeneous metal oxide core/shell structures10.1021/am400281s ↗
41. Defect quenching of conjugated polymer luminescence10.1103/PhysRevLett.73.744 ↗
42. Subpicosecond interfacial charge separation in dye-sensitized nanocrystalline titanium dioxide films10.1021/jp962227f ↗
43. Surface photovoltage characterization of a ZnO nanowire array/CdS quantum dot heterogeneous film and its application for photovoltaic devices10.1088/0957-4484/20/15/155707 ↗
44. Oligo- and polythiophene/ZnO hybrid nanowire solar cells10.1021/nl9036752 ↗