journal article·2018-10Open access

An integrated concentrated solar fuel generator utilizing a tubular solid oxide electrolysis cell as solar absorber

Meng Lin, Sophia Haussener

Abstract

Abstract We numerically assessed the potential of a solar reactor concept for efficient fuel processing under concentrated solar irradiation. This design integrates a cavity receiver, a tubular solid oxide electrolyzer, and the concentrated photovoltaic cells into a single reactor. The tubular electrolyzer simultaneously acts as the solar absorber (for reactant heating) and as the electrochemical device (for water and carbon dioxide splitting). A multi-physics axisymmetric model was developed, considering charge transfer in the membrane-electrolyte assembly, electrochemical and thermochemical reactions at the electrodes' reaction sites, species and fluid flow in the fluid channels and electrodes, and heat transfer for the whole reactor. A high solar-to-fuel efficiency was predicted (18.6% and 12.3% for indirectly and directly connected approaches, respectively, both at CPV = 385 and Cap = 1273). For synthesis gas production, the upper current density threshold to avoid carbon deposition was found to be 8725 A/m2 at reference conditions. A continuous range of H2/CO molar ratios of the synthesis gas was achieved by varying the inlet H2O/CO2 ratio, the irradiation concentration, and the operation current density. Efficiency-optimized operating conditions and design guidelines are presented. Our novel and integrated solar reactor concept for the solar-driven high-temperature electrolysis of H2O and CO2 has the potential to provide a simple, high solar-to-fuel efficiency reactor at reduced cost, all given by the reduced transmission losses of the integrated reactor design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chemical Looping and Thermochemical Processes · Advancements in Solid Oxide Fuel Cells · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Shi · 2015
2. Production of hydrogen from renewable resources and its effectiveness10.1016/j.ijhydene.2012.05.047 ↗
3. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review10.1016/j.jpowsour.2011.12.019 ↗
4. Simulations of the irradiation and temperature dependence of the efficiency of tandem photoelectrochemical water-splitting systems10.1039/c3ee41302k ↗
5. Configuration design and performance optimum analysis of a solar-driven high temperature steam electrolysis system for hydrogen production10.1016/j.ijhydene.2013.01.199 ↗
6. Hydrogen production from high-temperature steam electrolysis using solar energy10.1016/0360-3199(91)90083-U ↗
7. Hybrid-solid oxide electrolysis cell: a new strategy for efficient hydrogen production10.1016/j.nanoen.2017.11.074 ↗
8. Design and analysis of a solar tower based integrated system using high temperature electrolyzer for hydrogen production
9. Energy and exergy analyses of integrated hydrogen production system using high temperature steam electrolysis
10. Solar power tower as heat and electricity source for a solid oxide electrolyzer: a case study10.1002/er.3316 ↗
11. Optimal integration of a solid-oxide electrolyser cell into a direct steam generation solar tower plant for zero-emission hydrogen production10.1016/j.apenergy.2014.06.028 ↗
12. Techno-economic modeling and optimization of solar-driven high temperature electrolysis systems10.1016/j.solener.2017.07.077 ↗
13. Design and simulation of hybrid solar high-temperature hydrogen production system using both solar photovoltaic and thermal energy10.1016/j.seta.2014.05.002 ↗
14. Comprehensive modeling of tubular solid oxide electrolysis cell for co-electrolysis of steam and carbon dioxide
15. 3-D simulations of charge and mass distribution in tubular SOEC10.1149/1.2729316 ↗
16. Dynamic electro-thermal modeling of co-electrolysis of steam and carbon dioxide in a tubular solid oxide electrolysis cell
17. 2D thermal-fluid modeling and parametric analysis of a planar solid oxide fuel cell10.1016/j.enconman.2009.10.028 ↗
18. Menon · 2015 · 170
19. Comsol · 2017
20. Modeling and design guidelines for direct steam generation solar receivers10.1016/j.apenergy.2018.02.044 ↗
21. Modest · 2013
22. Numerical investigation of natural convection loss in cavity-type solar receivers in solar dish applications
23. 3D modeling of a 200 cm2 HT-PEFC short stack10.1016/j.ijhydene.2011.10.055 ↗
24. Nield · 2013
25. Pure and pseudo-pure fluid thermophysical property evaluation and the open-source thermophysical property library CoolProp10.1021/ie4033999 ↗
26. Transport phenomena10.1115/1.1424298 ↗
27. Kee · 2005
28. Bard · 1944
29. Water vapor electrolysis at high temperature: systems considerations and benefits10.1016/0360-3199(85)90168-5 ↗
30. Experimental and modeling study of solid oxide fuel cell operating with syngas fuel10.1016/j.jpowsour.2006.03.080 ↗
31. Roine · 2002
32. Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell10.1016/j.ijheatmasstransfer.2004.04.010 ↗
33. Radiation heat transfer in planar SOFC electrolytes10.1016/j.jpowsour.2005.07.045 ↗
34. Formulating liquid hydrocarbon fuels for SOFCs10.1016/j.jpowsour.2004.01.040 ↗
35. Reactions of hydrocarbons in small tubular SOFCs10.1016/S0378-7753(01)01067-9 ↗
36. Hydrogen and synthetic fuel production using high temperature solid oxide electrolysis cells (SOECs)10.1016/j.ijhydene.2010.06.065 ↗
37. Carbon deposition boundaries and other constant parameter curves, in the triangular representation of C- H- O equilibria, with applications to fuel cells10.1016/0365-1789(65)90024-X ↗
38. Equivalent circuit models for triple-junction concentrator solar cells10.1016/j.solmat.2011.10.013 ↗
39. Annual output estimation of concentrator photovoltaic systems using high-efficiency InGaP/InGaAs/Ge triple-junction solar cells based on experimental solar cell's characteristics and field-test meteorological data10.1016/j.solmat.2005.01.011 ↗
40. Evaluation of InGaP/InGaAs/Ge triple-junction solar cell and optimization of solar cell's structure focusing on series resistance for high-efficiency concentrator photovoltaic systems10.1016/j.solmat.2005.08.003 ↗
41. Design principle and loss engineering for photovoltaic-electrolysis cell system10.1021/acsomega.7b00012 ↗
42. Polarization behavior of high temperature solid oxide electrolysis cells (SOEC)10.2109/jcersj.105.369 ↗
43. Modeling CO2 electrolysis in solid oxide electrolysis cell10.1007/s10008-013-2081-8 ↗
44. High-temperature CO2 and H2O electrolysis with an electrolyte-supported solid oxide cell
45. Understanding the current-voltage behavior of high temperature solid oxide fuel cell stacks10.1149/2.1541713jes ↗
46. Holistic design guidelines for solar hydrogen production by photo-electrochemical routes10.1039/C5EE01821H ↗