Composite anodes for improved performance of a direct carbon fuel cell
Source abstract
Abstract
Abstract Direct carbon fuel cell (DCFC) technology has the potential to double the electric efficiency and halve the CO 2 emissions compared with conventional coal fired power plants. The anode performance, long term stability and cell scalability, in addition to fuel feed mechanism, are the major issues for the development of this technology. In this study, lanthanum strontium cobalt ferrite (LSCF) – silver composite anode was evaluated in a scalable version of the DCFC tubular cell in a bed of carbon powder. Ag was added to increase lateral conductivity of the anode and reduce ohmic losses. The cell was operated for 100 h during which it was twice thermally cycled. The performance degradation was studied by employing electrochemical and structural characterisation techniques. The composite anode, in comparison to LSCF anode, produced a 60% improvement in the power density. The sources of performance degradation of the cell were found to be the partial decomposition of the perovskite phase and anode microstructure changes as revealed by XRD and SEM analysis in addition to the loss of carbon contact to the anode resulting from the continuous carbon consumption in the cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. The World Energy Scenario: Composing Energy Future to 2015 http://www.worldenergy.org/publications/2013/world-energy-scenarios-composing-energy-futures-to-2050/Published on October 2013, cited on 8 December 2014.
2. A comprehensive review of direct carbon fuel cell technology10.1016/j.pecs.2012.01.003 ↗
3. Mechanistic modes for solid carbon conversion in high temperature fuel cells10.1149/1.3357050 ↗
4. Direct electro-chemical conversion of carbon to electric energy in a high temperature fuel cell10.1149/1.2069025 ↗
5. Durable power performance of a direct ash-free coal fuel cell10.1016/j.electacta.2013.10.124 ↗
6. Performance of an internal direct oxidation carbon fuel cell and its evaluation by graphic exergy analysis10.1021/ie00079a016 ↗
7. Solid state electrochemistry of direct carbon/air fuel cells10.1016/j.ssi.2008.01.078 ↗
8. Electrochemical oxidation of solid carbon in hybrid DCFC with solid oxide and molten carbonate binary electrolyte10.1039/b804785e ↗
9. Liquid tin anode solid oxide fuel cell for direct carbonaceous fuel conversion10.1149/1.2729026 ↗
10. Materials issues and recent developments in molten carbonate fuel cells10.1007/s10008-012-1771-y ↗
11. Mixed ionic electronic conducting perovskite anode for direct carbon fuel cells10.1016/j.ijhydene.2012.09.141 ↗
12. Electrochemical performance of direct carbon fuel cells with titanate anodes10.1016/j.electacta.2013.12.110 ↗
13. Performance evaluation of a tubular direct carbon fuel cell operating in a packed bed of carbon10.1016/j.energy.2014.01.105 ↗
14. Direct carbon fuel cell operation on brown coal10.1016/j.apenergy.2014.01.046 ↗
15. Electrochemical performance of a hybrid direct carbon fuel cell powered by pyrolysed MDF10.1039/b820836k ↗
16. A novel direct carbon fuel cell by approach of tubular solid oxide fuel cells10.1016/j.jpowsour.2009.07.032 ↗
17. Biomass to power conversion in a direct carbon fuel cell10.1016/j.ijhydene.2014.03.255 ↗
18. Degradation mechanism in a direct carbon fuel cell operated with demineralised brown coal10.1016/j.electacta.2014.07.088 ↗
19. Electrochemical performance of ceria-gadolinia electrolyte based direct carbon fuel cells10.1016/j.ssi.2011.05.009 ↗
20. Local defect structure of Sr3 Co2Ox (5.64≤x≤6.60): evolution of crystallographic and magnetic states10.1103/PhysRevB.74.174417 ↗
21. Low temperature fluorination of Sr3Fe2O7−x with polyvinylidine fluoride: an X-ray powder diffraction and Mössbauer spectroscopy study10.1016/j.jssc.2011.12.016 ↗
22. Synthesis and characterisation of the n = 2 Ruddlesden–Popper phases Ln2Sr(Ba)Fe2O7 (Ln = La, Nd, Eu)10.1016/j.materresbull.2013.05.058 ↗
23. Synthesis, structure, and electronic properties of LaCa2Mn2O710.1021/cm991094i ↗
24. A comparative study of the Ruddlesden-Popper series, Lan+1NinO3n+1 (n = 1, 2 and 3), for solid-oxide fuel-cell cathode applications10.1016/j.ssi.2006.05.005 ↗
25. Structure of the n = 2 and n = ∞ member of the Ruddlesden-Popper series, Srn+1SnnO3n+110.1016/S1466-6049(00)00013-1 ↗
26. Oxygen nonstoichiometry, chemical expansion, mixed conductivity, and anodic behavior of Mo-substituted Sr3Fe2O7-δ10.1016/j.ssi.2010.06.004 ↗
27. Stability of the perovskite phase LaBO3 (B = V, Cr, Mn, Fe, Co, Ni) in reducing atmosphere I. Experimental results10.1016/0025-5408(79)90048-5 ↗
28. Structural and microstructural stability of ceria–gadolinia electrolyte exposed to reducing environments of high temperature fuel cells10.1039/c3ta11752a ↗