CsCl-induced defect control of CsPbI2Br thin films for achieving open-circuit voltage of 1.33 V in all-inorganic perovskite solar cells
Source abstract
Abstract
Abstract All-inorganic perovskite solar cells (PSCs) attract attention due to their excellent optical properties and high thermal stability, but energy loss is a challenge due to the trap-assisted recombination loss at the imperfect film morphology. We herein demonstrate the optimization of α-CsPbI2Br morphology including low defect density and large grain size by employing cesium chloride (CsCl) as an additive. High-quality CsPbI2Br film grown with CsCl reveals high crystallinity and largely-grained morphology, which provides reduced defect density and energy loss. As a result, we optimize the CsPbI2Br device with 1% CsCl additive, which shows a power conversion efficiency (PCE) of 11.04% with an open-circuit voltage (VOC) of 1.33 V. The CsPbI2Br with CsCl shows stability maintaining >80% of the initial efficiency being aged for >360 h in ambient atmosphere. The CsCl-employed device also retains 98% of initial PCE after being heated at 85 °C for 12 h, verifying enhanced stability of the all-inorganic PSCs. In addition, the photovoltaic performance under white light-emitting diode yields PCE over 25% with a high V OC of 1.08 V in the presence of CsCl, which realizes the stable all-inorganic PSCs applicable in outdoor/indoor environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
2. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
3. The rise of highly efficient and stable perovskite solar cells10.1021/acs.accounts.6b00492 ↗
4. Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells10.1021/nn505978r ↗
5. 2019
6. Band gap tuning of CH3NH3Pb(Br1–xClx)3 hybrid perovskite for blue electroluminescence10.1021/acsami.5b02159 ↗
7. Optimization of stable quasi-cubic FAxMA1–xPbI3 perovskite structure for solar cells with efficiency beyond 20%10.1021/acsenergylett.7b00112 ↗
8. Grain-size-limited mobility in methylammonium lead iodide perovskite thin films10.1021/acsenergylett.6b00288 ↗
9. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
10. Quantum dot light‐emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3)10.1002/adma.201502567 ↗
11. Cesium enhances long-term stability of lead bromide perovskite-based solar cells10.1021/acs.jpclett.5b02597 ↗
12. Quantum dot–induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics10.1126/science.aag2700 ↗
13. Efficient α-CsPbI3 photovoltaics with surface terminated organic cations10.1016/j.joule.2018.06.013 ↗
14. Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells10.1021/acs.jpclett.6b01576 ↗
15. Surface passivation engineering strategy to fully-inorganic cubic CsPbI3 perovskites for high-performance solar cells
16. All-inorganic CsPbI2Br perovskite solar cells with high efficiency exceeding 13%10.1021/jacs.7b13229 ↗
17. Interface engineering for all‐inorganic CsPbI2Br perovskite solar cells with efficiency over 14%10.1002/adma.201802509 ↗
18. A facile low temperature fabrication of high performance CsPbI2Br all‐inorganic perovskite solar cells10.1002/solr.201700180 ↗
19. The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells10.1039/C9EE02020A ↗
20. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
21. Effects of formamidinium and bromide ion substitution in methylammonium lead triiodide toward high-performance perovskite solar cells10.1016/j.nanoen.2016.02.033 ↗
22. Control and study of the stoichiometry in evaporated perovskite solar cells10.1002/cssc.201500972 ↗
23. Tailored phase transformation of CsPbI2Br films by copper (II) bromide for high-performance all-inorganic perovskite solar cells10.1021/acs.nanolett.9b01553 ↗
24. Europium and acetate Co‐doping strategy for developing stable and efficient CsPbI2Br perovskite solar cells10.1002/smll.201904387 ↗
25. Controlled n‐doping in air‐stable CsPbI2Br perovskite solar cells with a record efficiency of 16.79%10.1002/adfm.201909972 ↗
26. Effective lewis base additive with S-donor for efficient and stable CsPbI2Br based perovskite solar cells10.1016/j.cej.2021.129931 ↗
27. Niobium incorporation into CsPbI2Br for stable and efficient AllInorganic perovskite solar cells10.1021/acsami.9b03622 ↗
28. Guanidinium doping enabled low-temperature fabrication of high-efficiency all-inorganic CsPbI2Br perovskite solar cells10.1039/C9TA10899H ↗
29. Boosting the stability of fully-inorganic perovskite solar cells through samarium doped CsPbI2Br perovskite10.1021/acssuschemeng.0c06452 ↗
30. Inverted all-inorganic CsPbI2Br perovskite solar cells with promoted efficiency and stability by nickel incorporation10.1021/acs.chemmater.9b03277 ↗
31. Implementing dopant-free hole-transporting layers and metal-incorporated CsPbI2Br for stable All-inorganic perovskite solar cells10.1021/acsenergylett.0c02385 ↗
32. Brightly luminescent and color-tunable formamidinium lead halide perovskite FAPbX3 (X= Cl, Br, I) colloidal nanocrystals10.1021/acs.nanolett.6b04781 ↗
33. Tunable perovskite semiconductor CH3NH3SnX3 (X: Cl, Br, or I) characterized by X-ray and DTA10.1246/bcsj.20110075 ↗
34. Optical properties of CH3NH3PbX3 (X= halogen) and their mixed-halide crystals10.1023/A:1016584519829 ↗
35. Synthesis and optical properties of lead-free cesium tin halide perovskite quantum rods with high-performance solar cell application10.1021/acs.jpclett.6b02344 ↗
36. From anti-perovskite to double anti-perovskite: tuning lattice chemistry to achieve super-fast Li+ transport in cubic solid lithium halogen–chalcogenides10.1039/C7TA08698A ↗
37. Bifunctional π-conjugated ligand assisted stable and efficient perovskite solar cell fabrication via interfacial stitching10.1039/C9TA03898A ↗
38. Slow response of carrier dynamics in perovskite interface upon illumination10.1021/acsami.8b13932 ↗
39. MAPbI2.9-xBrxCl0.1 hybrid halide perovskites: shedding light on the effect of chloride and bromide ions on structural and photoluminescence properties10.1016/j.apsusc.2016.08.176 ↗
40. Investigation regarding the role of chloride in organic–inorganic halide perovskites obtained from chloride containing precursors10.1021/nl503279x ↗
41. Methylammonium chloride: a key additive for highly efficient, stable, and up-scalable perovskite solar cells10.1002/eem2.12040 ↗
42. VOC over 1.4 V for amorphous tin-oxide-based dopant-free CsPbI2Br perovskite solar cells10.1021/jacs.0c02227 ↗
43. Hole‐boosted Cu (Cr, M) O2 nanocrystals for all‐inorganic CsPbBr3 perovskite solar cells10.1002/ange.201910843 ↗
44. Precursor engineering for all‐inorganic CsPbI2Br perovskite solar cells with 14.78% efficiency10.1002/adfm.201803269 ↗
45. Low temperature‐processed stable and efficient carbon‐based CsPbI2Br planar perovskite solar cells by in situ passivating grain boundary and trap density10.1002/solr.201900109 ↗
46. A solution-processed spinel CuCo2O4 as an effective hole transport layer for efficient perovskite solar cells with negligible hysteresis10.1021/acssuschemeng.9b03776 ↗
47. Highly efficient low temperature solution processable planar type CH3NH3PbI3 perovskite flexible solar cells10.1039/C5TA09520D ↗
48. CsPbBrI2 perovskites with low energy loss for high-performance indoor and outdoor photovoltaics10.1016/j.scib.2020.09.017 ↗
49. Methylammonium iodide-mediated controlled crystal growth of CsPbI2Br films for efficient and stable All-inorganic perovskite solar cells10.1021/acsami.0c11047 ↗