journal article·2020-02

NaCl-assisted defect passivation in the bulk and surface of TiO2 enhancing efficiency and stability of planar perovskite solar cells

Hua Li, Dan Li, Wenjing Zhao, Shihao Yuan, Zhike Liu, Dapeng Wang, Shengzhong Liu

Publisher page

Abstract

Abstract The defect passivation in the bulk of metal oxide electron transport layers and at the electron transport layers/perovskite interfaces is one of the pivotal roles that enhance electron injection and extraction to gain the high-performing planar perovskite solar cells. Herein, we incorporate the sodium chloride dopants into the compact TiO2 as electron transport layers at a low temperature of 200 °C. It is demonstrated that the appropriate sodium chloride additive can effectively passivate the bulk and surface defects of the intrinsic TiO2, suppressing oxygen vacancies-induced nonradiative recombination centers and improving electron extraction and collection. Simultaneously, the proper sodium chloride treatment remarkably enhances the TiO2 conductivity, reduces the water contact angle, and further indirectly optimizes the morphology of perovskite layer. With 5.0 mol% sodium chloride-incorporated TiO2, the perovskite solar cells exhibit the enhancement in the photovoltaic parameters because of the lower carrier recombination and faster charge transport, contributing to efficiency up to 19.84% with small hysteresis. More importantly, this sodium chloride-modified electron transport layer based perovskite solar cell also emerge a considerable long-term air-storage stability of about 80% of its initial efficiency after 800 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Chelate-Pb intermediate engineering for high-efficiency perovskite solar cells10.1021/acsami.8b02257 ↗
3. Record efficiency stable flexible perovskite solar cell using effective additive assistant strategy10.1002/adma.201801418 ↗
4. Controlled defects and enhanced electronic extraction in fluorine-incorporated zinc oxide for high-performance planar perovskite solar cells10.1016/j.solmat.2018.03.047 ↗
5. Insulated interlayer for efficient and photostable electron-transport-layer-free perovskite solar cells10.1021/acsami.8b00021 ↗
6. Semitransparent CH3NH3PbI3 films achieved by solvent engineering for annealing- and electron transport layer-free planar perovskite solar cells10.1002/solr.201700222 ↗
7. Efficient electron-transport layer-free planar perovskite solar cells via recycling the FTO/glass substrates from degraded devices10.1016/j.solmat.2016.03.035 ↗
8. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
9. Hot-substrate deposition of hole- and electron-transport layers for enhanced performance in perovskite solar cells
10. A strategic review on processing routes towards highly efficient perovskite solar cells10.1039/C7TA08277K ↗
11. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
12. Efficient planar CsPbBr3 perovskite solar cells by dual-source vacuum evaporation10.1016/j.solmat.2018.07.009 ↗
13. Amorphous metal oxide blocking layers for highly efficient low-temperature brookite TiO2-based perovskite solar cells10.1021/acsami.7b16662 ↗
14. Enhancing efficiency and stability of perovskite solar cells through Nb-doping of TiO2 at low temperature10.1021/acsami.7b01063 ↗
15. Low-temperature SnO2-modified TiO2 yields record efficiency for normal planar perovskite solar modules10.1039/C8TA01192C ↗
16. TiO2 phase junction electron transport layer boosts efficiency of planar perovskite solar cells10.1002/advs.201700614 ↗
17. First-principles study of electron injection and defects at the TiO2/CH3NH3PbI3 interface of perovskite solar cells10.1021/acs.jpclett.7b02622 ↗
18. Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes
19. Replacing PbI2 by MAPbI3 to realize large grain size and reduced hysteresis for highly efficient perovskite solar cells10.1002/solr.201700147 ↗
20. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
21. Synergistic effect to high-performance perovskite solar cells with reduced hysteresis and improved stability by the introduction of Na-treated TiO2 and spraying-deposited CuI as transport layers10.1021/acsami.7b14926 ↗
22. Sulfate-assisted interfacial engineering for high yield and efficiency of triple cation perovskite solar cells with alkali-doped TiO2 electron-transporting layers10.1002/adfm.201706287 ↗
23. Boosting the efficiency of perovskite solar cells with CsBr-modified mesoporous TiO2 beads as electron-selective contact10.1002/adfm.201705763 ↗
24. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
25. An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive10.1039/C4NR02425G ↗
26. Enhanced planar perovskite solar cell performance via contact passivation of TiO2/perovskite interface with NaCl doping approach10.1021/acsaem.8b00602 ↗
27. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer10.1016/j.nanoen.2016.11.028 ↗
28. Investigation of carrier generation mechanism in fluorine-doped n+-in–Ga–Zn-O for self-aligned thin-film transistors10.1109/JDT.2015.2472981 ↗
29. XPS and X-ray diffraction studies of aluminum-doped zinc oxide transparent conducting films10.1016/0040-6090(95)08239-5 ↗
30. Electrical conductivity and relaxation in poly(3-hexylthiophene)10.1103/PhysRevB.80.195211 ↗
31. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2
32. Analysis of the hysteresis behavior of perovskite solar cells with interfacial fullerene self-assembled monolayers10.1021/acs.jpclett.6b02103 ↗
33. On the origin of hysteresis in perovskite solar cells10.1002/adfm.201602231 ↗
34. Structural features and their functions in surfactant-armoured methylammonium lead iodide perovskites for highly efficient and stable solar cells10.1039/C8EE00995C ↗
35. Charge accumulation and hysteresis in perovskite-based solar cells: an electro-optical analysis10.1002/aenm.201500829 ↗
36. Efficiency-enhanced planar perovskite solar cells via an isopropanol/ethanol mixed solvent process10.1021/acsami.6b08863 ↗