Suitability of representative electrochemical energy storage technologies for ramp-rate control of photovoltaic power
Source abstract
Abstract
Abstract Photovoltaic (PV) systems can exhibit rapid variances in their power output due to irradiance changes which can destabilise an electricity grid. This paper presents a quantitative comparison of the suitability of different electrochemical energy storage system (ESS) technologies to provide ramp-rate control of power in PV systems. Our investigations show that, for PV systems ranging from residential rooftop systems to megawatt power systems, lithium-ion batteries with high energy densities (up to 600 Wh L−1) require the smallest power-normalised volumes to achieve the ramp rate limit of 10% min−1 with 100% compliance. As the system size increases, the ESS power-normalised volume requirements are significantly reduced due to aggregated power smoothing, with high power lithium-ion batteries becoming increasingly more favourable with increased PV system size. The possibility of module-level ramp-rate control is also introduced, and results show that achievement of a ramp rate of 10% min−1 with 100% compliance with typical junction box sizes will require ESS energy and power densities of 400 Wh L−1 and 2300 W L−1, respectively. While module-level ramp-rate control can reduce the impact of solar intermittence, the requirement is challenging, especially given the need for low cost and long cycle life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. 2017
2. Power-electronic systems for the grid integration of renewable energy sources: a survey10.1109/TIE.2006.878356 ↗
3. Gevorgian · 2013
4. A review of key power system stability challenges for large-scale PV integration10.1016/j.rser.2014.09.027 ↗
5. Frequency response services designed for energy storage10.1016/j.apenergy.2017.06.046 ↗
6. Advances and trends of energy storage technology in Microgrid10.1016/j.ijepes.2012.07.015 ↗
7. Dynamic frequency control support by energy storage to reduce the impact of wind and solar generation on isolated power System's inertia10.1109/TSTE.2012.2205025 ↗
8. 2015
9. 2016
10. Characterization of power optimizer potential to increase energy capture in photovoltaic systems operating under nonuniform conditions10.1109/TPEL.2012.2226476 ↗
11. Partial-shading assessment of photovoltaic installations via module-level monitoring10.1109/JPHOTOV.2014.2351623 ↗
12. Energy storage for mitigating the variability of renewable electricity sources: an updated review10.1016/j.esd.2010.09.007 ↗
13. A collaborative operation method between new energy-type dispersed power supply and EDLC10.1109/TEC.2004.827714 ↗
14. Design of ultracapacitor based filter for isolated PV source feeding pulsing load10.1016/j.epsr.2007.08.003 ↗
15. Ramp-rate control of photovoltaic generator with electric double-layer capacitor10.1109/TEC.2008.2001580 ↗
16. Grid-tied PV system energy smoothing
17. Battery energy storage station (BESS)-Based smoothing control of photovoltaic (PV) and wind power generation fluctuations10.1109/TSTE.2013.2247428 ↗
18. Power output fluctuations in large scale pv plants: one year observations with one second resolution and a derived analytic model10.1002/pip.1016 ↗
19. Storage requirements for PV power ramp-rate control10.1016/j.solener.2013.10.037 ↗
20. Energy storage requirements for PV power ramp rate control in northern europe10.1155/2016/2863479 ↗
21. Technological developments in batteries: a survey of principal roles, types, and management needs10.1109/MPE.2017.2708812 ↗
22. From irradiance to output power fluctuations: the PV plant as a low pass filter10.1002/pip.1063 ↗
23. Advanced lead/acid batteries for stand-alone power-supply systems10.1016/0378-7753(90)80085-R ↗
24. Application of valve-regulated lead-acid batteries for storage of solar electricity in stand-alone photovoltaic systems in the northwest areas of China10.1016/j.jpowsour.2006.02.105 ↗
25. Comparative study of lead-acid batteries for photovoltaic stand-alone lighting systems10.1007/s10800-007-9403-4 ↗
26. Linden · 2002
27. Comparison the economic analysis of the battery between lithium-ion and lead-acid in PV stand-alone application10.1016/j.egypro.2014.07.167 ↗
28. Battery energy storage technology for power systems—an overview10.1016/j.epsr.2008.09.017 ↗
29. Issues and challenges facing rechargeable lithium batteries
30. 2011
31. History, evolution, and future status of energy storage10.1109/JPROC.2012.2190170 ↗
32. A comparative testing study of commercial 18650-format lithium-ion battery cells10.1149/2.0721508jes ↗
33. An outlook on lithium ion battery technology10.1021/acscentsci.7b00288 ↗
34. 2017
35. A comparative study of Li-ion battery, supercapacitor and nonaqueous asymmetric hybrid devices for automotive applications10.1016/S0378-7753(02)00718-8 ↗
36. LixCoO2 (0<x<-1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
37. Manganese oxides for lithium batteries10.1016/S0079-6786(97)81003-5 ↗
38. Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries10.1016/j.jpowsour.2003.10.009 ↗
39. Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries10.1016/S0378-7753(03)00173-3 ↗
40. 2012
41. Synthesis, redox potential evaluation and electrochemical characteristics of NASICON-related-3D framework compounds10.1016/S0167-2738(96)00472-9 ↗
42. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
43. Understanding electrochemical potentials of cathode materials in rechargeable batteries10.1016/j.mattod.2015.10.009 ↗
44. Albright · 2012
45. Safe and fast-charging Li-ion battery with long shelf life for power applications10.1016/j.jpowsour.2010.11.093 ↗
46. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
47. Conversion cathodes for rechargeable lithium and lithium-ion batteries10.1039/C6EE02326F ↗
48. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
49. Research progress regarding Si-based anode materials towards practical application in high energy density Li-ion batteries10.1039/C6QM00302H ↗
50. Béguin · 2013
51. A comparative study of equivalent circuit models of ultracapacitors for electric vehicles10.1016/j.jpowsour.2014.10.170 ↗
52. Efficient storage mechanisms for building better supercapacitors10.1038/nenergy.2016.70 ↗
53. A review of supercapacitor modeling, estimation, and applications: a control/management perspective10.1016/j.rser.2017.05.283 ↗
54. Pseudocapacitive oxide materials for high-rate electrochemical energy storage10.1039/c3ee44164d ↗
55. Nonaqueous hybrid lithium-ion and sodium-ion capacitors10.1002/adma.201702093 ↗
56. R&D considerations for the performance and application of electrochemical capacitors10.1016/j.electacta.2007.01.011 ↗
57. True performance metrics in electrochemical energy storage10.1126/science.1213003 ↗
58. Electrochemical capacitors for energy management10.1126/science.1158736 ↗
59. An asymmetric hybrid nonaqueous energy storage cell10.1149/1.1383553 ↗
60. High-energy density graphite/AC capacitor in organic electrolyte10.1016/j.jpowsour.2007.11.101 ↗
61. Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage10.1073/pnas.1420398112 ↗
62. First prototypes of hybrid potassium-ion capacitor (KIC): an innovative, cost-effective energy storage technology for transportation applications10.1016/j.jpowsour.2017.07.005 ↗
63. Luque · 2003 · 912
64. Estimating solar radiation on slopes of arbitrary aspect10.1016/S0168-1923(01)00245-3 ↗
65. Comparing ramp rates from large and small PV systems, and selection of batteries for ramp rate control
66. Stochastic control of smart home energy management with plug-in electric vehicle battery energy storage and photovoltaic array10.1016/j.jpowsour.2016.09.157 ↗
67. Optimal integration of a hybrid solar-battery power source into smart home nanogrid with plug-in electric vehicle10.1016/j.jpowsour.2017.07.086 ↗
68. 2017
69. Analysis of a battery-integrated boost converter for module-based series connected photovoltaic system
70. Battery-integrated power optimizer for PV-battery hybrid power generation system
71. A review of power decoupling techniques for microinverters with three different decoupling capacitor locations in PV systems10.1109/TPEL.2012.2221482 ↗
72. 2017
73. Behavior of a photovoltaic inverter under sudden increase in irradiance due to reflection in clouds
74. 2016
75. 2017
76. The future cost of electrical energy storage based on experience rates10.1038/nenergy.2017.110 ↗
77. Present and future applications of supercapacitors in electric and hybrid vehicles
78. Applications of electrochemical capacitors
79. Overview of current development in electrical energy storage technologies and the application potential in power system operation10.1016/j.apenergy.2014.09.081 ↗