journal article·2010-03

Low-temperature solid oxide fuel cells with novel La0.6Sr0.4Co0.8Cu0.2O3−δ perovskite cathode and functional graded anode

Bin Lin, Jinfan Chen, Yihan Ling, Xiaozhen Zhang, Yinzhu Jiang, Ling Zhao, Xingqin Liu, Guangyao Meng

Journal of Power Sources· Volume 195· Issue 6
Publisher page

Abstract

Abstract The perovskite La 0.6 Sr 0.4 Co 0.8 Cu 0.2 O 3− δ (LSCCu) oxide is synthesized by a modified Pechini method and examined as a novel cathode material for low-temperature solid oxide fuel cells (LT-SOFCs) based upon functional graded anode. The perovskite LSCCu exhibits excellent ionic and electronic conductivities in the intermediate-to-low-temperature range (400–800 °C). Thin Sm 0.2 Ce 0.8 O 1.9 (SDC) electrolyte and NiO–SDC anode functional layer are prepared over macroporous anode substrates composed of NiO–SDC by a one-step dry-pressing/co-firing process. A single cell with 20 μm thick SDC electrolyte on a porous anode support and LSCCu–SDC cathode shows peak power densities of only 583.2 mW cm −2 at 650 °C and 309.4 mW cm −2 for 550 °C. While a cell with 20 μm thick SDC electrolyte and an anode functional layer on the macroporous anode substrate shows peak power densities of 867.3 and 490.3 mW cm −2 at 650 and 550 °C, respectively. The dramatic improvement of cell performance is attributed to the much improved anode microstructure that is confirmed by both SEM observation and impedance spectroscopy. The results indicate that LSCCu is a very promising cathode material for LT-SOFCs and the one-step dry-pressing/co-firing process is a suitable technique to fabricate high performance SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Minh · J. Am. Ceram. Soc. · 1993 · 76 · 56310.1111/j.1151-2916.1993.tb03645.x ↗
2. Lin · J. Power Sources · 2008 · 177 · 33010.1016/j.jpowsour.2007.11.109 ↗
3. Wei · J. Power Sources · 2008 · 176 · 110.1016/j.jpowsour.2007.09.120 ↗
4. Wei · J. Am. Ceram. Soc. · 2007 · 90 · 336410.1111/j.1551-2916.2007.01930.x ↗
5. Ma · J. Power Sources · 2006 · 161 · 9510.1016/j.jpowsour.2006.04.099 ↗
6. Hibino · J. Electrochem. Soc. · 2002 · 149 · 150310.1149/1.1513983 ↗
7. Lin · J. Alloys Compd. · 2009 · 472 · 55610.1016/j.jallcom.2008.05.056 ↗
8. Peng · Solid State Ionics · 2006 · 177 · 38910.1016/j.ssi.2005.11.020 ↗
9. Sunarso · J. Membr. Sci. · 2008 · 320 · 1310.1016/j.memsci.2008.03.074 ↗
10. Teraoka · Chem. Lett. · 1988 · 50310.1246/cl.1988.503 ↗
11. Teraoka · Chem. Lett. · 1985 · 174310.1246/cl.1985.1743 ↗
12. Lin · J. Power Sources · 2009 · 186 · 5810.1016/j.jpowsour.2008.09.041 ↗
13. Banerjee · Adv. Funct. Mater. · 2007 · 17 · 284710.1002/adfm.200600890 ↗
14. Yasumoto · Solid State Ionics · 2002 · 148 · 54510.1016/S0167-2738(02)00115-7 ↗
15. Zhang · Acta Mater. · 2008 · 56 · 487610.1016/j.actamat.2008.06.004 ↗
16. Boehm · Solid State Sci. · 2003 · 5 · 97310.1016/S1293-2558(03)00091-8 ↗
17. Zhao · J. Power Sources · 2009 · 194 · 83510.1016/j.jpowsour.2009.06.010 ↗
18. Eguchi · Solid State Ionics · 1992 · 52 · 16510.1016/0167-2738(92)90102-U ↗
19. Ding · J. Power Sources · 2009 · 194 · 81510.1016/j.jpowsour.2009.06.055 ↗
20. Lin · J. Phys. Chem. A · 2009
21. Yan · J. Power Sources · 2007 · 164 · 56710.1016/j.jpowsour.2006.11.060 ↗