A study on the microstructural development of gel polymer electrolytes and different imidazolium-based ionic liquids for dye-sensitized solar cells
Source abstract
Abstract
Abstract Quasi-solid state electrolyte (gel-like) based on polymer matrix PVDF-HFP/PEO is considered as a suitable candidate for producing DSSC due to its essential influence on the performance of the device. In this work, PVDF-HFP/PEO membranes were prepared over the whole composition range in presence of either one of the ionic liquids (ILs) including BMII plus LiI, or BMIMBF4 via phase inversion and compared with liquid electrolyte and ILs individually. It was found that the blend ratio affected some of the membrane properties, such as porosity, pore size, pore connectivity, liquid uptake ability, and morphology. SEM analysis and mercury porosimetry were used to study the pore configuration and porosity of the membranes. The effects of two semicrystalline polymers on the morphology and crystallinity of the membrane were examined by DSC and also WAXD. It was found that there is a direct relationship between the crystallinity reduction and improvement of ionic conductivity of the samples. The photovoltaic performances of the fabricated DSSC at the highest ionic conductive optimized membrane revealed an improvement of Voc, Jsc, fill factor, and the solar conversion efficiency of 6.47%. The long-term durability of the quasi solid DSSC was increased compared to a liquid type electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Energy use in world economy from household-consumption-based perspective10.1016/j.enpol.2018.12.005 ↗
2. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
3. Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
4. Dye sensitized solar cells for economically viable photovoltaic systems10.1021/jz400112n ↗
5. A polyblend electrolyte (PVP/PEG+ KI+ I2) for dye-sensitized nanocrystalline TiO2 solar cells10.1016/j.electacta.2006.12.067 ↗
6. A novel thermosetting gel electrolyte for stable quasi-solid-state dye-sensitized solar cells10.1002/adma.200602886 ↗
7. Presence of NaI in PEO/PVdF-HFP blend based gel polymer electrolytes for fabrication of dye-sensitized solar cells10.1016/j.mssp.2017.04.016 ↗
8. Efficient quasi-solid-state dye-sensitized solar cells from graphene incorporated conducting gel electrolytes10.1039/c3ta14385f ↗
9. PEO/PVdF–HFP electrolytes for natural dye sensitized solar cell applications: effect of modified nano-TiO2on electrochemical and photovoltaic performance10.1007/s10854-015-2916-4 ↗
10. Charge carrier relaxation in different plasticized PEO/PVDF-HFP blend solid polymer electrolytes10.1021/acs.jpcb.7b02277 ↗
11. Improvement of ionic conductivity and performance of quasi-solid-state dye sensitized solar cell using PEO/PMMA gel electrolyte10.1016/j.tca.2015.07.006 ↗
12. Structural, morphological, electrical and electrochemical study on plasticized PVdF-HFP/PEMA blended polymer electrolyte for lithium polymer battery application10.1016/j.ssi.2018.02.022 ↗
13. High-performance electrospun POSS-(PMMA 46) 8/PVDF hybrid gel polymer electrolytes with PP support for Li-ion batteries10.1007/s11581-018-2749-2 ↗
14. A gel polymer electrolyte based on Polyacrylonitrile/organic montmorillonite membrane exhibiting dense structure for lithium ion battery10.1016/j.ssi.2017.12.014 ↗
15. Synthesis, characterization of reduced graphene oxide nanosheets and its reinforcement effect on polymer electrolyte for dye sensitized solar cell applications10.1016/j.solener.2018.05.008 ↗
16. A novel green solvent alternative for polymeric membrane preparation via nonsolvent-induced phase separation (NIPS)10.1016/j.memsci.2018.12.051 ↗
17. Textile waste, dyes/inorganic salts separation of cerium oxide-loaded loose nanofiltration polyethersulfone membranes10.1016/j.cej.2019.123787 ↗
18. Preparation of PVDF based blend microporous membranes for lithium ion batteries by thermally induced phase separation: I. Effect of PMMA on the membrane formation process and the properties10.1016/j.memsci.2013.05.028 ↗
19. Characterization of poly (vinylidene fluoride-co-hexafluoropropylene)(PVdF-HFP) nanofiber membrane based quasi solid electrolytes and their application in a dye sensitized solar cell10.1016/j.electacta.2018.02.025 ↗
20. Bicontinuous and cellular structure design of PVDF membranes by using binary solvents for the membrane distillation process10.1039/C8RA02692K ↗
21. Addition of electrospun TiO2 nanofibers for improving the charge capabilities of polymer electrolyte-based DSSCs10.1149/2.0661409jes ↗
22. Influence of polymer concentration and dyes on photovoltaic performance of dye-sensitized solar cell with P(VdF-HFP)-based gel polymer electrolyte10.1016/j.jpowsour.2008.06.063 ↗
23. Improved electrochemical and photovoltaic performance of dye sensitized solar cells based on PEO/PVDF-HFP/silane modified TiO2 electrolytes and MWCNT/Nafion® counter electrode10.1039/C5RA01770J ↗
24. Preparation and performance of polymer electrolyte based on poly(vinylidene fluoride)/polysulfone blend membrane via thermally induced phase separation process for lithium ion battery10.1016/j.jpowsour.2014.05.056 ↗
25. Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process10.1016/j.memsci.2008.09.022 ↗
26. Study of PVDF-HFP/PMMA blended micro-porous gel polymer electrolyte incorporating ionic liquid [BMIM]BF4 for Lithium ion batteries10.1016/j.electacta.2014.04.076 ↗
27. Electrical, mechanical, structural, and thermal behaviors of polymeric gel electrolyte membranes of poly(vinylidene fluoride-co-hexafluoropropylene) with the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate plus lithium tetrafluoroborate10.1002/app.41456 ↗
28. Ko · 2014
29. An analysis of the crystallization behavior of poly (ethylene oxide)/poly (methyl methacrylate) blends by spectroscopic and calorimetric techniques10.1002/pol.1984.180220715 ↗
30. Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential10.1016/j.biomaterials.2004.10.007 ↗
31. Effect of nanoscale CeO2 on PVDF-HFP-based nanocomposite porous polymer electrolytes for Li-ion batteries10.1007/s10008-007-0460-8 ↗
32. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
33. Cocontinuous morphology in vinylidene fluoride based polymers/poly(ethylene oxide) blends10.1002/app.38167 ↗
34. Effect of miscibility state on crystallization behavior and polymorphism in crystalline/crystalline blends of poly(vinylidene fluoride)/poly(ethylene oxide)10.1007/s13233-016-4099-0 ↗
35. Conjugated dual-phase transitions in crystalline/crystalline blend of poly(vinylidene fluoride)/poly(ethylene oxide)10.1007/s00289-016-1827-8 ↗
36. Miscible blends of two crystalline polymers. 1. Phase behavior and miscibility in blends of poly (vinylidene fluoride) and poly (1, 4-butylene adipate)10.1021/ma950651t ↗
37. Effect of lower critical solution temperature phase separation on crystallization kinetics and morphology of poly (butylenes succinate)/poly (ethylene oxide) blend10.1016/j.polymer.2013.02.020 ↗
38. Effective morphology control in an immiscible crystalline/crystalline blend by artificially selected viscoelastic phase separation pathways10.1021/ma5001496 ↗
39. Theory of spinodal decomposition assisted crystallization in binary mixtures10.1063/1.3425774 ↗
40. Phase separation of poly (methyl methacrylate)/poly (styrene-co-acrylonitrile) blends with controlled distribution of silica nanoparticles10.1021/ma301186b ↗
41. Molecular interaction and ionic conductivity of polyethylene oxide–LiClO4 nanocomposites10.1016/j.jpcs.2009.12.085 ↗
42. Preparation and characterization of solid polymer electrolytes based on PHEMO and PVDF-HFP10.1016/j.ssi.2009.03.003 ↗
43. Aligned carbon nanotube/polymer hybrid electrolytes for high performance dye sensitized solar cell applications10.1039/C5RA10843H ↗
44. Solvent-free polymer electrolytes based on thermally annealed porous P(VdF-HFP)/P(EO-EC) membranes10.1016/j.jpowsour.2004.12.005 ↗
45. Carrier migration mechanism of physically cross-linked polymer gel electrolytes based on PVDF membranes10.1021/jp020633v ↗
46. Microstructure of PVdF-co-HFP based electrolyte prepared by preferential polymer dissolution process10.1016/j.memsci.2006.12.002 ↗
47. Quasi solid state dye-sensitized solar cells based on polyvinyl alcohol (PVA) electrolytes containing I−/I−3I−/I3− redox couple10.1007/s11082-013-9723-z ↗
48. Ionic conductivity and mobility in network polymers from poly (propylene oxide) containing lithium perchlorate10.1063/1.335386 ↗
49. Micro-porous P(VDF-HFP)-based polymer electrolyte filled with Al 2O3 nanoparticles10.1016/j.ssi.2005.05.006 ↗
50. Enhanced efficiency in dye-sensitized solar cell based on zinc oxide-modified poly(ethylene oxide) gel electrolyte10.1007/s11581-017-2271-y ↗
51. Graphene tailored polymer gel electrolytes for 9.1%-efficiency quasi-solid-state dye-sensitized solar cells10.1016/j.jpowsour.2017.03.018 ↗
52. A hybrid poly (ethylene oxide)/poly (vinylidene fluoride)/TiO2 nanoparticle solid‐state redox electrolyte for dye‐sensitized nanocrystalline solar cells10.1002/adfm.200500159 ↗
53. Hydroxypropyl cellulose based non-volatile gel polymer electrolytes for dye-sensitized solar cell applications using 1-methyl-3-propylimidazolium iodide ionic liquid10.1038/srep18056 ↗
54. Electrochemical and structural characterization of polymer gel electrolytes based on a PEO copolymer and an imidazolium-based ionic liquid for dye-sensitized solar cells10.1021/am900596x ↗
55. Highly efficient plastic crystal ionic conductors for solid-state dye-sensitized solar cells10.1038/srep03520 ↗
56. Dye-sensitized solar cells based on electrospun polymer blends as electrolytes10.1016/j.solmat.2010.04.029 ↗
57. Gel polymer electrolyte system based on starch grafted with ionic liquid: synthesis, characterization and its application in dye-sensitized solar cell10.1016/j.electacta.2018.12.090 ↗
58. Theory of the impedance of electron diffusion and recombination in a thin layer10.1021/jp011941g ↗
59. Correlation between photovoltaic performance and impedance spectroscopy of dye-sensitized solar cells based on ionic liquids10.1021/jp066178a ↗
60. Organosoluble starch derivative as quasi-solid electrolytes in DSSC: unravelling the synergy between electrolyte rheology and photovoltaic properties10.1016/j.solener.2019.12.074 ↗
61. Doubling exponent models for the analysis of porous film electrodes by impedance. Relaxation of TiO2 nanoporous in aqueous solution10.1021/jp993148h ↗
62. Plasticizer doped ionic liquid incorporated solid polymer electrolytes for photovoltaic application10.1016/j.cap.2010.10.012 ↗