journal article·2019-11

Fluorescence resonance energy transfer effect enhanced high performance of Si quantum Dots/CsPbBr3 inverse opal heterostructure perovskite solar cells

Shujie Zhou, Rui Tang, Hui Li, Lin Fu, Bo Li, Longwei Yin

Publisher page

Abstract

Abstract CsPbBr3 based perovskite solar cells draw boosted investigation benefitting from their simplified preparation property and outstanding stability against moist and heat while the photo-electrical conversion efficiency (PCE) is still worth promotion. In addition, relatively wide band gap limits the light utilization ability of pristine CsPbBr3 which leads to insufficient photo-induced charge carrier population thereby a low photocurrent density. Herein, we for the first time demonstrate a strategy to combine crystalized Si quantum dots (QDs) with CsPbBr3 inverse opal (IO) which significantly enhances the solar energy utilization efficiency by virtue of providing an additional fluorescence resonance energy transfer (FRET) process from Si QDs to CsPbBr3 IO. Acting as donor, the emitted photoluminescence from Si QDs can be absorbed by CsPbBr3, which serves as acceptor, leading to an increased carrier population in the system. Meanwhile, the multi-dimensional heterojunction between Si QDs and CsPbBr3 IO effectively facilitates the system bulk charge transfer process. A greatly improved PCE up to 8.31% with an obviously enhanced photocurrent density up to 7.8 mA⋅cm−2 can be obtained with a competitive IPCE up to 81%. This strategy provides a new alternative method to develop high-performance perovskite solar cells and other photo-electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Plant and animal studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Four-terminal all-perovskite tandem solar cells achieving power conversion efficiencies exceeding 23%10.1021/acsenergylett.7b01287 ↗
2. Low-temperature Nb-Doped SnO2 electron-selective contact yields over 20% efficiency in planar perovskite solar cells10.1021/acsenergylett.8b00055 ↗
3. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
4. Addition of adamantylammonium iodide to hole transport layers enables highly efficient and electroluminescent perovskite solar cells10.1039/C8EE02404A ↗
5. Barrier design to prevent metal-induced degradation and improve thermal stability in perovskite solar cells10.1021/acsenergylett.8b00926 ↗
6. Black and stable: a path to all-inorganic halide perovskite solar cells10.1016/j.joule.2018.07.001 ↗
7. Surface passivation engineering strategy to fully-inorganic cubic CsPbI3 perovskites for high-performance solar cells10.1038/s41467-018-03169-0 ↗
8. Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering10.1016/j.nanoen.2018.11.053 ↗
9. Terahertz conductivity within colloidal CsPbBr3 perovskite nanocrystals: remarkably high carrier mobilities and large diffusion lengths10.1021/acs.nanolett.6b01168 ↗
10. Solution-grown CsPbBr3 perovskite single crystals for photon Detection10.1021/acs.chemmater.6b04298 ↗
11. Cesium enhances long-term stability of lead bromide perovskite-based solar cells10.1021/acs.jpclett.5b02597 ↗
12. Carbon-based CsPbBr3 perovskite solar cells: all-ambient processes and high thermal stability10.1021/acsami.6b11393 ↗
13. Cation exchange‐induced Dimensionality construction: from monolayered to multilayered 2D single crystal halide perovskites10.1002/admi.201700441 ↗
14. Y. Zhao, J. Duan, H. Yuan, Y. Wang, X. Yang, B. He, Q. Tang, Using SnO2 QDs and CsMBr3 (M = Sn, Bi, Cu) QDs as Charge-Transporting Materials for 10.6%-Efficiency All-Inorganic CsPbBr3 Perovskite Solar Cells with an Ultrahigh Open-Circuit Voltage of 1.610 V, Solar RRL, 0 1800284.10.1002/solr.201800284 ↗
15. Air-stable CsPb1−xBixBr3 (0 ≤ x ≪ 1) perovskite crystals: optoelectronic and photostriction properties10.1039/C7TC00417F ↗
16. Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3 films10.1016/j.solmat.2017.08.014 ↗
17. Enhanced solar-Driven gaseous CO2 conversion by CsPbBr3 nanocrystal/Pd nanosheet Schottky-junction photocatalyst10.1021/acsaem.8b01133 ↗
18. Au exchange or Au Deposition: dual reaction pathways in Au–CsPbBr3 heterostructure nanoparticles10.1021/acs.nanolett.7b02355 ↗
19. Photoelectrochemically active and environmentally stable CsPbBr3/TiO2 core/shell nanocrystals10.1002/adfm.201704288 ↗
20. Boosting two-dimensional MoS2/CsPbBr3 photodetectors via enhanced light absorbance and interfacial carrier separation10.1021/acsami.7b14745 ↗
21. High internal emission efficiency of silicon nanoparticles emitting in the visible range10.1021/acsphotonics.7b01624 ↗
22. Size-dependent photoluminescence efficiency of silicon nanocrystal quantum dots10.1021/acs.jpcc.7b08054 ↗
23. Hill · 2018
24. Inverted device architecture for enhanced performance of flexible silicon quantum dot light-emitting Diode10.1021/acs.jpclett.8b02278 ↗
25. Controlling energy transfer in silicon quantum dot assemblies made from all-inorganic colloidal silicon quantum dots10.1021/acs.jpcc.6b08423 ↗
26. Concurrent modulation of quantum dot photoluminescence using a combination of charge transfer and förster resonance energy transfer: competitive quenching and multiplexed biosensing modality10.1021/jacs.6b11042 ↗
27. Energy transfer in silicon nanocrystal solids made from all-inorganic colloidal silicon nanocrystals10.1021/acs.jpclett.5b01067 ↗
28. Enhanced photovoltaic performance of ultrathin Si solar cells via semiconductor nanocrystal sensitization: energy transfer vs. optical coupling effects10.1039/C5NR07932B ↗
29. High-efficiency silicon hybrid solar cells employing nanocrystalline Si quantum dots and Si nanotips for energy management10.1016/j.nanoen.2017.03.037 ↗
30. Morphology‐controlled synthesis of organometal halide perovskite inverse opals10.1002/anie.201506367 ↗
31. Preparation of organometal halide perovskite photonic crystal films for potential optoelectronic applications10.1021/acsami.6b09227 ↗
32. Color-coded batteries – electro-photonic inverse opal materials for enhanced electrochemical energy storage and optically encoded Diagnostics10.1002/adma.201503973 ↗
33. Mesoscopic CH3NH3PbI3 perovskite solar cells using TiO2 inverse opal electron-conducting scaffolds10.1039/C6TA07004C ↗
34. Slow-photon-effect-induced photoelectrical-conversion efficiency enhancement for carbon-quantum-dot-sensitized inorganic CsPbBr3 inverse opal perovskite solar cells10.1002/adma.201703682 ↗
35. 3D–2D–0D interface profiling for record efficiency all-inorganic CsPbBrI2 perovskite solar cells with superior stability10.1002/aenm.201703246 ↗
36. Insight into the effect of ligand-exchange on colloidal CsPbBr3 perovskite quantum dot/mesoporous-TiO2 composite-based photodetectors: much faster electron injection10.1039/C7TC01611E ↗
37. Encapsulated within graphene shell silicon nanoparticles anchored on vertically aligned graphene trees as lithium ion battery anodes10.1016/j.nanoen.2014.02.011 ↗
38. Consecutive interfacial transformation of cesium lead halide nanocubes to ultrathin nanowires with improved stability10.1021/acsami.8b19219 ↗
39. High-performance perovskite photodetectors based on solution-processed all-inorganic CsPbBr3 thin films10.1039/C7TC02137B ↗
40. One-step synthesis of fluorescent silicon quantum dots (Si-QDs) and their application for cell imaging10.1039/C5RA13119G ↗
41. Size-dependent exciton formation dynamics in colloidal silicon quantum dots10.1021/acsnano.5b07073 ↗
42. Polymer–polymer förster resonance energy transfer significantly boosts the power conversion efficiency of bulk-heterojunction solar cells10.1002/adma.201501275 ↗
43. Improved carriers injection capacity in perovskite solar cells by introducing A-site interstitial defects10.1039/C7TA01203A ↗
44. Excitation density dependent photoluminescence quenching and charge transfer efficiencies in hybrid perovskite/organic semiconductor bilayers10.1002/aenm.201802474 ↗
45. Layered MoS2 coupled MOFs-derived dual-phase TiO2 for enhanced photoelectrochemical performance10.1039/C6TA10511D ↗
46. Metal–organic framework derived narrow bandgap cobalt carbide sensitized titanium dioxide nanocage for superior photo-electrochemical water oxidation performance10.1002/adfm.201706154 ↗
47. Lead-free halide perovskite solar cells with high photocurrents realized through vacancy modulation10.1002/adma.201401991 ↗