journal article·2019-10

Interface engineering via phthalocyanine decoration of perovskite solar cells with high efficiency and stability

Shuai Zhang, Zhilei Hu, Jing Zhang, Xuguang Jia, Jun Jiang, Yiqi Chen, Bencai Lin, He Jiang, Bijun Fang, Ningyi Yuan, Jianning Ding

Publisher page

Abstract

Abstract Organic semiconductor additives offer a promising strategy to partially eliminate defects within polycrystalline perovskite films. However, these additives are often photochemically unstable. Attempts to improve the delicate performance of perovskite solar cells (PSCs) by these additives are unimpressive. Here, we use an organic small-molecule semiconductor with unique photochemical stability, 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine (Pc), to decorate perovskite/hole transfer layer interface. Pc molecules are observed to be located in the perovskite shallow layer and probably at perovskite grain boundaries. PSCs with moderate Pc decoration show mean and best power conversion efficiencies (PCEs) of 19.3% and 19.8%, respectively, compared to 17.5% and 18.5% for the control. The PCE decay of the best PSC with moderate Pc is less than 10% of the initial PCE, and almost 30% for the best control under 500 h continuous illumination and ambient atmosphere (~30% humidity). The photovoltaic performance enhancement induced by Pc decoration is ascribed to the decreased perovskite hole trap state density (from 2.07 × 1016 to 1.11 × 1016 cm−3), the increased perovskite hole mobility (from 7.73 × 10−3 to 1.22 × 10−2 cm2V−1s−1), improved charge carrier transfer and extraction, and partially sealed channels to impede moisture diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. 2019
2. Stable high-performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
3. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
4. High photoluminescence efficiency and optically pumped lasing in solution-processed mixed halide perovskite semiconductors10.1021/jz5005285 ↗
5. Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber10.1063/1.4864778 ↗
6. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films10.1039/C6EE02941H ↗
7. Grain-boundary "patches" by in situ conversion to enhance perovskite solar cells stability10.1002/adma.201800544 ↗
8. Maximizing and stabilizing luminescence from halide perovskites with potassium passivation10.1038/nature25989 ↗
9. Citric acid modulated growth of oriented lead perovskite crystals for efficient solar cells10.1021/jacs.7b03856 ↗
10. An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive10.1039/C4NR02425G ↗
11. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
12. PVDF-HFP additive for visible-light-semitransparent perovskite films yielding enhanced photovoltaic performance10.1016/j.solmat.2017.05.057 ↗
13. A polymer scaffold for self-healing perovskite solar cells10.1038/ncomms10228 ↗
14. Long-term stability of organic-inorganic hybrid perovskite solar cells with high efficiency under high humidity conditions10.1039/C6TA08117G ↗
15. Highly efficient and stable inverted perovskite solar cell obtained via treatment by semiconducting chemical additive10.1002/adma.201805554 ↗
16. Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering10.1038/nenergy.2016.148 ↗
17. Bulk heterojunction perovskite–PCBM solar cells with high fill factor10.1038/nphoton.2016.3 ↗
18. Bulk heterojunction perovskite hybrid solar cells with large fill factor10.1039/C5EE00222B ↗
19. Heterojunction engineering for high efficiency cesium-formamidinium double cation lead halide perovskite solar cells10.1002/cssc.201702221 ↗
20. Stable and efficient organo-metal halide hybrid perovskite solar cells via π-conjugated lewis base polymer induced trap passivation and charge extraction10.1002/adma.201706126 ↗
21. Tailored phase conversion under conjugated polymer enables thermally stable perovskite solar cells with efficiency exceeding 21%10.1021/jacs.8b10520 ↗
22. One-pot photoetching to control size, surface oxygen groups, and dispersion of fullerene particles in water10.1007/s11051-013-1867-z ↗
23. Photochemical transformation of aqueous C-60 clusters in sunlight10.1021/es802465z ↗
24. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
25. An organic photoelectrode working in the water phase: visible-light-induced dioxygen evolution by a perylene derivative/cobalt phthalocyanine bilayer10.1002/anie.200504454 ↗
26. Photoelectrochemical and photocatalytic properties of biphasic organic p- and n-type semiconductor nanoparticles fabricated by a reprecipitation process10.1021/am200096p ↗
27. Photocatalytic decomposition of N-methyl-2-pyrrolidone, aldehydes, and thiol by biphase and p/n junction-like organic semiconductor composite nanoparticles responsive to nearly full spectrum of visible light10.1016/j.jphotochem.2012.06.011 ↗
28. Perovskite solar cells employing copper phthalocyanine hole-transport material with an efficiency over 20% and excellent thermal stability10.1021/acsenergylett.8b01483 ↗
29. Phthalocyanines and porphyrinoid analogues as hole- and electron-transporting materials for perovskite solar cells10.1039/C9CS00059C ↗
30. Enhancing the perovskite solar cell performance by the treatment with mixed anti-solvent10.1016/j.jpowsour.2018.10.008 ↗
31. Green anti-solvent processed planar perovskite solar cells with efficiency beyond 19%10.1002/solr.201700213 ↗
32. In-situ cross-linking strategy for efficient and operationally stable methylammoniun lead iodide solar cells10.1038/s41467-018-06204-2 ↗
33. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
34. Performance enhancement of aqueous dye-sensitized solar cells via introduction of a quasi-solid-state electrolyte with an inverse opal structure10.1016/j.solener.2016.01.016 ↗
35. A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells10.1126/science.aao5561 ↗
36. Observation of enhanced hot phonon bottleneck effect in 2D perovskites10.1063/1.5021679 ↗
37. Observation of a hot-phonon bottleneck in lead-iodide perovskites10.1038/nphoton.2015.213 ↗
38. Single crystal formamidinium lead iodide (FAPbI3 ): insight into the structural, optical, and electrical properties10.1002/adma.201505002 ↗
39. Double extraction of uniformly generated electron‐hole pairs from insulators with noninjecting contacts10.1063/1.1660633 ↗
40. N, N -di- p -Methylthiophenylamine-Substituted (2-ethylhexyl)-9H-carbazole: a simple, dopant-free hole-transporting material for planar perovskite solar cells10.1021/acs.jpcc.7b04469 ↗
41. A simple and dopant-free hole-transporting material based on (2-ethylhexyl)-9H-carbazole for efficient planar perovskite solar cells10.1039/C7TC03683C ↗
42. Significantly improved black phase stability of FAPbI3 nanowires via spatially confined vapor phase growth in nanoporous templates10.1039/C8NR03058H ↗
43. PbI2–HMPA complex pretreatment for highly reproducible and efficient CH3NH3PbI3 perovskite solar cells10.1021/jacs.6b08347 ↗
44. Excess charge-carrier induced instability of hybrid perovskites10.1038/s41467-018-07438-w ↗