Tailoring Opto-electrical properties of ultra-thin indium tin oxide films via filament doping: Application as a transparent cathode for indoor organic photovoltaics
Source abstract
Abstract
Abstract Either side of organic photovoltaics incorporates a transparent conducting electrode for light entry, which becomes particularly crucial under indoor light conditions with low light intensity. However, since electrical resistivity and optical transparency with respect to film thickness are mutually contradictory, sufficiently thick (>150 nm) electrodes are inevitably required to ensure the appropriate electrical conductivity, at the sacrifice of transmittance. This paper introduces an electric field induced filament doping method to realize ultra-thin indium tin oxide with high conductivity. The proposed method allows for injecting metal dopants (i.e., Ni) into ultra-thin indium tin oxide under an electric field, enabling substantial resistance reduction while retaining high transmittance and low surface roughness. Optimum light absorption and effective carrier transport via filament doping provides improved performance for indoor organic photovoltaics. As a proof-of-principle demonstration, we fabricate poly(3-hexylthiophene):indene-C60 bisadduct based inverted organic photovoltaics with 10 nm Ni-doped indium tin oxide as a transparent cathode, leading to a power conversion efficiency of 14.6 ± 1.8% under the 1000-lux light-emitting diode. This efficiency is 40% higher than that achieved from the device using commercially available 150 nm indium tin oxide.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Wireless energy harvesting for the internet of things10.1109/MCOM.2015.7120024 ↗
2. Solar-powering the internet of things10.1126/science.aag0476 ↗
3. Energy harvesting in wireless sensor networks: a comprehensive review10.1016/j.rser.2015.11.010 ↗
4. Energizing wireless sensor networks by energy harvesting systems: scopes challenges and approaches10.1016/j.rser.2014.07.035 ↗
5. A photovoltaic self-powered gas sensor based on a single-walled carbon nanotube/Si heterojunction10.1039/C7NR02590D ↗
6. Estimating state of charge and health of lithium-ion batteries with guided waves using built-in piezoelectric sensors/actuators10.1016/j.jpowsour.2018.02.056 ↗
7. A comprehensive study on improved power materials for high-temperature thermoelectric generators10.1016/j.jpowsour.2018.10.076 ↗
8. Significantly enhanced thermoelectric properties of PEDOT:PSS films through sequential post-treatments with common acids and bases10.1002/aenm.201602116 ↗
9. Photovoltaic performance of organic photovoltaics for indoor energy harvester10.1016/j.orgel.2017.05.023 ↗
10. Self-assembly monolayers manipulate the power conversion processes in organic photovoltaics10.1016/j.jpowsour.2018.10.091 ↗
11. Solar trees: first large-scale demonstration of fullysolution coated, semitransparent, flexible organic photovoltaic modules10.1002/advs.201500342 ↗
12. Flexible and semitransparent organic solar cells10.1002/aenm.201701791 ↗
13. Procedures and practices for evaluating tin-film solar cell stability10.1002/aenm.201501407 ↗
14. Organic photovoltaics10.1039/b812502n ↗
15. Maximum efficiencies of indoor photovoltaic devices10.1109/JPHOTOV.2012.2225023 ↗
16. Indoor light recycling: a new home for organic photovoltaics10.1039/C6TC03344J ↗
17. Organic photovoltaic cells – promising indoor light harvesters for self-sustainable electronics10.1039/C7TA10875C ↗
18. Organic photovoltaics for low light applications10.1016/j.solmat.2011.07.011 ↗
19. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
20. A projection of commercial-scale organic photovoltaic module costs10.1016/j.solmat.2013.07.041 ↗
21. A new architecture for transparent electrodes: relieving the trade-off between electrical conductivity and optical transmittance10.1002/adma.201100419 ↗
22. An ultrathin, smooth, and low-loss Al-doped Ag film and its application as a transparent electrode in organic photovoltaics10.1002/adma.201306091 ↗
23. Highly electrically conductive indium–tin–oxide thin films epitaxially grown on yttriastabilized zirconia (100) by pulsed-laser deposition10.1063/1.126461 ↗
24. Surface modification and assembly of transparent indium tin oxide nanocrystals for enhanced conductivity10.1021/jp502361d ↗
25. Appl. The role of Ar plasma treatment in generating oxygen vacancies in indium tin oxide thin films prepared by the sol-gel process10.1016/j.apsusc.2017.02.007 ↗
26. Novel surface modification of indium-tin-oxide films using ion implantation for Organic Light-Emitting Diodes10.1143/JJAP.43.5516 ↗
27. Electrode dependence of filament formation in HfO2 resistive-switching memory10.1063/1.3567915 ↗
28. Effects of heat treatment on properties of ITO films prepared by rf magnetron sputtering10.1016/j.vacuum.2004.01.081 ↗
29. Redox-based resistive switching memories – nanoionic mechanisms, prospects, and challenges10.1002/adma.200900375 ↗
30. Preparation and characterization of Ni–indium tin oxide cosputtered thin films for organic light-emitting diode application10.1016/j.tsf.2004.08.005 ↗
31. Electrical and optical properties of ZnO transparent conducting films by the sol–gel method10.1016/S0022-0248(02)01907-3 ↗
32. Influence of post-annealing temperature on the properties exhibited by ITO, IZO and GZO thin films10.1016/j.tsf.2007.03.126 ↗
33. Structural, optical and light scattering properties of post etched RF sputtered ZnO:Al thin films deposited at various substrate temperature10.1016/j.optmat.2013.01.037 ↗
34. Theory of impurity scattering in semiconductors10.1103/PhysRev.77.388 ↗
35. Effects of films thickness and sputtering power on properties of ITO thin films deposited by RF magnetron sputtering without oxygen10.1007/s10854-016-5223-9 ↗
36. Copper nanowire-TiO2-polyacrylate composite electrodes with high conductivity and smoothness for flexible polymer solar cells
37. Enhanced compatibility between a copper nanowire-based transparent electrode and a hybrid perovskite absorber by poly(ethylenimine)10.1039/C7NR04739H ↗
38. Highly transparent conductive electrode with ultra-low HAZE by grain boundary modification of aqueous solution fabricated alumina-doped zinc oxide nanocrystals10.1063/1.4915489 ↗
39. IZO deposition by RF and DC sputtering on paper and application on flexible electrochromic devices10.1016/j.displa.2013.06.004 ↗
40. Co-percolating graphene-wrapped silver nanowire network for high performance, highly stable, transparent conducting electrodes10.1002/adfm.201300124 ↗
41. Solution-processed transparent blue organic light-emitting diodes with graphene as the top cathode10.1038/srep09693 ↗
42. Fabrication of carbon nanotube hybrid films as transparent electrodes for small-molecule photovoltaic cells10.1039/C6RA01674J ↗
43. Investigations on reduced graphene oxide film embedded with silver nanowire as a transparent conducting electrode10.1016/j.solmat.2014.05.013 ↗
44. Polymer solar cells with NiO hole-collecting interlayers processed by atomic layer deposition10.1016/j.orgel.2013.07.028 ↗
45. A photoelectron spectroscopy study on the indium tin oxide treatment by acids and bases10.1063/1.123397 ↗
46. Oriented growth of Al2O3 :ZnO nanolaminates for use as electron-selective electrodes in inverted polymer solar cells10.1002/adfm.201102968 ↗
47. Electrical and optical properties of ZnO processed by atomic layer deposition in inverted polymer solar cells
48. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
49. A universal method to produce low–work function electrodes for organic electronics10.1126/science.1218829 ↗
50. Surface characterization and microstructure of ITO thin films at different annealing temperatures10.1016/j.apsusc.2007.05.032 ↗
51. Rapid thermal annealing of ITO films10.1016/j.apsusc.2011.03.009 ↗
52. Ultra-thin and smooth transparent electrode for flexible and leakage-free organic light-emitting diodes10.1038/srep09464 ↗
53. Toward high-performance polmer photovoltaic devices for low-power indoor application10.1002/solr.201700174 ↗
54. Polymer surface modification to optimize inverted organic photovoltaic devices under indoor light conditions10.1016/j.solmat.2018.04.023 ↗
55. Inverted tandem polymer solar cells with polyethylenimine-modified MoOX/Al2O3 :ZnO nanolaminate as the charge recombination layers10.1002/aenm.201400048 ↗
56. Investigation of the organic solar cell characteristics for indoor LED light applications10.7567/JJAP.54.071602 ↗
57. Tattoo-like transferable hole selective electrodes for highly efficient, solution-processed organic indoor photovoltaics
58. Plasmonic-enhanced organic photovoltaic devices for low-power light applications10.1109/JPHOTOV.2018.2797975 ↗
59. Designing a ternary photovoltaic cell for indoor light harvesting with a power conversion efficiency exceeding 20%10.1039/C8TA01728J ↗
60. Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C6010.1063/1.1895473 ↗
61. All-plastic solar cells with a high photovoltaic dynamic range10.1039/c3ta15073a ↗
62. Indoor-type photovoltaics with organic solar cells through optimal design10.1016/j.dyepig.2018.06.025 ↗
63. Organic solar cells and fully printed super-capacitors optimized for indoor light energy harvesting10.1016/j.nanoen.2016.06.017 ↗