journal article·2015-11

Plasma reforming of methane in a tunable ferroelectric packed-bed dielectric barrier discharge reactor

A.M. Montoro-Damas, J. Javier Brey, Miguel A. Rodríguez, Agustín R. González-Elipe, José Cotrino

Publisher page

Abstract

Abstract In a tunable circular parallel plate dielectric barrier discharge reactor with pellets of a ferroelectric material separating the electrodes we investigate the plasma reforming of methane trying to maximize both the reaction yield and the energetic efficiency of the process. The geometrical configuration of the reactor (gap between electrodes, active electrode area) and the ferroelectric pellet size have been systematically varied to determine their influence on the process efficiency. The comparison between wet (with H2O as reactant), oxidative (with O2), and dry (with CO2) reforming reactions reveals a higher efficiency for the former with CO + H2 as main reaction products. The maximum energetic efficiency EE, defined as the produced number of litres of H2 per kWh, found for optimized working conditions at low-level applied power is higher than the up to date best-known results. A comprehensive discussion of the influence of the different parameters affecting the reaction yield is carried out.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Applications and Diagnostics · Surface Modification and Superhydrophobicity · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Energy efficient methane-to-syngas conversion with low H2/CO ratio by simultaneous catalytic reactions of methane with carbon dioxide and oxygen10.1007/BF00813234 ↗
2. Syngas production via methane steam reforming with oxygen: plasma reactors versus chemical reactors10.1088/0022-3727/34/18/313 ↗
3. Hydrogen production by methane decomposition: a review10.1016/j.ijhydene.2009.11.036 ↗
4. CO2 reforming of methane by the combination of dielectric-barrier discharges and catalysis10.1039/b007015g ↗
5. Dielectric-barrier discharges: their history, discharge physics, and industrial applications10.1023/A:1022470901385 ↗
6. Hydrogen production by reforming of hydrocarbons and alcohols in a dielectric barrier discharge10.1016/j.jpowsour.2007.01.059 ↗
7. Hybrid catalytic-DBD plasma reactor for the production of hydrogen and preferential CO oxidation (CO-PROX) at reduced temperatures10.1039/b909488a ↗
8. low temperature production of formaldehyde from carbon dioxide and ethane by plasma-assisted catalysis in a ferroelectrically moderated dielectric barrier discharge reactor10.1021/cs4008528 ↗
9. Ueber die elektrostatische Induction und die Verzögerung des Stroms in Flaschendrähten10.1002/andp.18571780905 ↗
10. From ozone generators to flat television screens: history and future potential of dielectric-barrier discharges10.1351/pac199971101819 ↗
11. Review of plasma catalysis on hydrocarbon reforming for hydrogen production—interaction, integration, and prospects10.1016/j.apcatb.2008.06.021 ↗
12. A comparative study of non-thermal plasma assisted reforming technologies10.1016/j.ijhydene.2007.03.026 ↗
13. Plasma catalytic hybrid processes: gas discharge initiation and plasma activation of catalytic processes10.1016/j.cattod.2003.11.001 ↗
14. Reaction mechanism of methane activation using non-equilibrium pulsed discharge at room temperature10.1016/S0016-2361(03)00163-7 ↗
15. Methane decomposition in a barium titanate packed-bed nonthermal plasma reactor10.1023/A:1021897419040 ↗
16. Review of packed-bed plasma reactor for ozone generation and air pollution control10.1021/ie071411s ↗
17. Wet conversion of methane and carbon dioxide in a DBD reactor10.1007/s11090-012-9411-y ↗
18. The direct partial oxidation of methane to organic oxygenates using a dielectric barrier discharge reactor as a catalytic reactor analog10.1016/S0920-5861(01)00430-8 ↗
19. Methane oxidative conversion pathways in a dielectric barrier discharge reactor-investigation of gas phase mechanism10.1016/j.cej.2007.01.022 ↗
20. Carbon dioxide reforming of methane at near room temperature in low energy pulsed plasma10.1016/j.ijhydene.2008.10.056 ↗
21. Syngas production from propane using atmospheric non-thermal plasma10.1007/s11090-009-9166-2 ↗
22. Overview of hydrogen production options for developing hydrogen energy, fuel processing for fuel cells and mitigation of CO2 emissions
23. Parameters identification and gas behaviour characterization of DBD systems10.1109/TPS.2013.2273462 ↗
24. Lide · 2003
25. Nonequilibrium plasma reforming of greenhouse gases to synthesis gas10.1021/ef980044h ↗
26. Evaluation of different dielectric barrier discharge plasma configurations as an alternative technology for green C1 chemistry in the carbon dioxide reforming of methane and the direct decomposition of methanol10.1021/jp100346q ↗
27. Effects of reactor packing materials on H2 production by CO2 reforming of CH4 in a dielectric barrier discharge10.1002/ppap.201100130 ↗
28. Overview of hydrogen production technologies from biogas and the applications in fuel cells10.1016/j.ijhydene.2013.02.057 ↗
29. Chu · 2013
30. Non-thermal plasma catalysis of methane: principles, energy efficiency, and applications10.1016/j.cattod.2013.04.002 ↗
31. A review on development of industrial processes and emerging techniques for production of hydrogen from renewable and sustainable sources10.1016/j.rser.2013.02.019 ↗
32. Plasmas for environmental issues: from hydrogen production to 2D materials assembly10.1088/0963-0252/23/6/063002 ↗
33. A Model parameter extraction method for dielectric barrier discharge ozone chamber using differential evolution10.2478/msr-2014-0011 ↗
34. Optical characterization of 50 Hz atmospheric pressure single dielectric barrier discharge plasma10.2528/PIERM12012403 ↗
35. Effects of pulse parameters on the atmospheric-pressure dielectric barrier discharges driven by the high-voltage pulses in Ar and N210.1088/0963-0252/23/6/065019 ↗