journal article·2021-07

Effects of carbon black on the electrochemical performances of SiO anode for lithium-ion capacitors

Xianzhong Sun, Linbin Geng, Sha Yi, Chen Li, Yabin An, Xiaohu Zhang, Xiong Zhang, Kai Wang, Yanwei Ma

Publisher page

Abstract

Abstract Lithium-ion capacitor (LIC) is a power-type energy storage device, possessing the advantages of high energy density, high power density, long cycle life and wide working temperature range. Silicon-based anode materials for LICs have ultrahigh theoretical specific capacities, about 5–10 times higher than traditional graphite anode. However, since silicon-based materials are semiconductors and the electrical conductivity is limited, the imbalance in reaction kinetics between the rapid non-Faradaic capacitive cathode and sluggish Faradaic redox anode is one of the main barrier to high-performance LICs. In this work, the effects of carbon conductive additive on the electrochemical performances of SiOx anode have been studied. Carbon black (CB, Super C45) shows good electrical conductivity and moderate initial coulombic efficiency, suitable for the conductive additive of SiOx anode. Due to the conducting network and the buffer space for volume expansion/contraction during lithiation/de-lithiation, the combination of CB and SiOx particles play a synergetic effect on improving rate capability and cycling stability of SiOx anode. The reversible specific capacity of SiOx anode containing 30 wt% CB can reach 1549 mAh g−1 in the voltage range of 0.01–2.0 V. It remains no capacity decay after 500 cycles in the shallow voltage range of 0.1–0.6 V, indicating that SiOx is a very promising anode material for LICs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Electrochemical impedance spectroscopy study of lithium-ion capacitors: modeling and capacity fading mechanism10.1016/j.jpowsour.2021.229454 ↗
2. Tuning the interlayer spacing of graphene laminate films for efficient pore utilization towards compact capacitive energy storage10.1038/s41560-020-0560-6 ↗
3. Development of a cordless electric impact driver with Li-ion capacitor pack as an energy storage device10.1016/j.est.2020.101566 ↗
4. Scalable combustion synthesis of graphene-welded activated carbon for high-performance supercapacitors10.1016/j.cej.2021.128781 ↗
5. A comprehensive review of lithium ion capacitor: development, modelling, thermal management and applications10.1016/j.est.2020.102019 ↗
6. Review of hybrid ion capacitors: from aqueous to lithium to sodium10.1021/acs.chemrev.8b00116 ↗
7. Recent advances in prelithiation materials and approaches for lithium-ion batteries and capacitors10.1016/j.ensm.2020.07.009 ↗
8. High-efficiency sacrificial prelithiation of lithium-ion capacitors with superior energy-storage performance10.1016/j.ensm.2019.08.023 ↗
9. Progress and perspectives on pre-lithiation technologies for lithium ion capacitors10.1039/D0EE00807A ↗
10. Leakage current and self-discharge in lithium-ion capacitor10.1016/j.jelechem.2019.113386 ↗
11. Electrochemical performances and capacity fading behaviors of activated carbon/hard carbon lithium ion capacitor10.1016/j.electacta.2017.03.110 ↗
12. High performance lithium-ion hybrid capacitors with pre-lithiated hard carbon anodes and bifunctional cathode electrodes10.1016/j.jpowsour.2014.07.146 ↗
13. Considerations about the influence of the structural and electrochemical properties of carbonaceous materials on the behavior of lithium-ion capacitors10.1016/j.jpowsour.2014.05.024 ↗
14. A comparative study of pre-lithiated hard carbon and soft carbon as anodes for lithium-ion capacitors
15. The role of pre-lithiation in activated carbon/Li4Ti5O12 asymmetric capacitors10.1016/j.electacta.2017.03.189 ↗
16. A two-step method for preparing Li4Ti5O12-graphene as an anode material for lithium-ion hybrid capacitors10.1039/C5RA20168C ↗
17. High performance lithium-ion hybrid capacitors employing Fe3O4-graphene composite anode and activated carbon cathode
18. Graphene and maghemite composites based supercapacitors delivering high volumetric capacitance and extraordinary cycling stability10.1016/j.electacta.2015.01.041 ↗
19. High-performance lithium-ion capacitors based on CoO-graphene composite anode and holey carbon nanolayer cathode10.1021/acssuschemeng.9b00641 ↗
20. A 29.3 Wh kg-1 and 6 kW kg-1 pouch-type lithium-ion capacitor based on SiOx/graphite composite anode10.1016/j.jpowsour.2018.12.090 ↗
21. Improving anode performances of lithium-ion capacitors employing carbon–Si composites10.1007/s12598-019-01328-w ↗
22. Self-assembly of nickel phosphate-based nanotubes into two-dimensional crumpled sheet-like architectures for high-performance asymmetric supercapacitors10.1016/j.nanoen.2019.104270 ↗
23. Bimetallic metal-organic frameworks for controlled catalytic graphitization of nanoporous carbons10.1038/srep30295 ↗
24. Fabrication of flexible microsupercapacitors with binder-free ZIF-8 derived carbon films via electrophoretic deposition10.1246/bcsj.20190298 ↗
25. Three-Dimensional networked metal–organic frameworks with conductive polypyrrole tubes for flexible supercapacitors10.1021/acsami.7b09944 ↗
26. Nanoarchitectonics: a new materials horizon for prussian blue and its analogues10.1246/bcsj.20180368 ↗
27. Li4Ti5O12-based energy conversion and storage systems: status and prospects10.1016/j.ccr.2017.05.006 ↗
28. Large polarization of Li4Ti5O12 lithiated to 0 V at large charge/discharge rates10.1021/acsami.6b04239 ↗
29. High-capacity SiOx (0≤x≤2) as promising anode materials for next-generation lithium-ion batteries10.1016/j.jallcom.2020.155774 ↗
30. Memory effect highlighting in silicon anodes for high energy density lithium-ion batteries10.1016/j.elecom.2012.10.027 ↗
31. Silicon oxycarbide-graphite electrodes for high-power energy storage devices10.3390/ma13194302 ↗
32. Lithium-ion capacitor using rice husk-derived cathode and anode active materials adapted to uncontrolled full-pre-lithiation10.1016/j.jpowsour.2019.226924 ↗
33. Progress of 3D network binders in silicon anodes for lithium ion batteries10.1039/D0TA07713E ↗
34. Improving cycle stability of Si anode through partially carbonized polydopamine coating10.1016/j.jelechem.2020.114738 ↗
35. In situ growth of silicon carbide interface enhances the long life and high power of the mulberry-like Si-based anode for lithium-ion batteries10.1016/j.est.2020.101856 ↗
36. Theoretically quantifying the effect of pre-lithiation on energy density of Li-ion batteries10.1149/1945-7111/abdb47 ↗
37. Lithium ion capacitors in organic electrolyte system: scientific problems, material development, and key technologies10.1002/aenm.201801243 ↗
38. Good practice guide for papers on supercapacitors and related hybrid capacitors for the Journal of Power Sources10.1016/j.jpowsour.2019.227636 ↗
39. Development of carbon conductive additives for advanced lithium ion batteries10.1016/j.jpowsour.2010.07.002 ↗
40. Lithium ion cell performance enhancement using aqueous LiFePO4 cathode dispersions and polyethyleneimine dispersant10.1149/2.037302jes ↗
41. Improvement of the high-rate capability of LiNi1/3Co1/3Mn1/3O2 cathode by adding highly electroconductive and mesoporous graphene10.1016/j.jallcom.2018.05.110 ↗
42. Enhanced high rate and low-temperature performances of mesoporous LiFePO4/Ketjen Black nanocomposite cathode material10.1016/j.electacta.2013.10.037 ↗
43. Effect of ketjen black as conducting materials on the capacitance of electric double layer capacitor10.5796/electrochemistry.73.900 ↗
44. Application of a novel binder for activated carbon-based electrical double layer capacitors with nonaqueous electrolytes10.1007/s10008-013-2051-1 ↗
45. (LiNi0.5Co0.2Mn0.3O2 + AC)/graphite hybrid energy storage device with high specific energy and high rate capability10.1016/j.jpowsour.2013.06.038 ↗
46. Growth and characterization of ZnIn2Se4 buffer layer on CuInSe2 thin films10.1016/j.jcrysgro.2009.10.003 ↗
47. Effect of Al2O3 on the formation of calcium ferrite in the solid state10.3390/met9060681 ↗
48. Development of a new quantitative X-ray microanalysis method for electron microscopy10.1017/S1431927610094018 ↗
49. A universal matching approach for high power-density and high cycling-stability lithium ion capacitor10.1016/j.jpowsour.2019.227211 ↗
50. The influence of anode/cathode capacity ratio on cycle life and potential variations of lithium-ion capacitors10.1149/2.1171912jes ↗
51. Temperature effect on electrochemical performances of Li-ion hybrid capacitors10.1007/s10008-015-2876-x ↗
52. Formation challenges of lithium-ion battery manufacturing10.1016/j.joule.2019.11.002 ↗