journal article·2020-07

Highly conductive and nonflammable composite polymer electrolytes for rechargeable quasi-solid-state Li-metal batteries

Ziyang Dai, Jing Yu, Jiapeng Liu, Rong Liu, Qi Sun, Dengjie Chen, Francesco Ciucci

Publisher page

Abstract

Abstract Solid-state Li-metal batteries are promising as next-generation energy storage devices. However, the main bottlenecks are the poor conductivity of the solid electrolyte and the high interfacial resistance. While polymers exhibit a lower interfacial resistance in comparison to ceramics, they often require the inclusion of flammable solvents. In this work, highly conductive composite polymer electrolyte (CPE) membranes are prepared by integrating a poly(vinylidene fluoride) matrix (PVDF) with a Li-conductive perovskite (i.e., Li0.38Sr0.44Ta0.70Hf0.30O2.95F0.05, LSTHF), a flame-retarding solvent (i.e., trimethyl phosphate (TMP)), and a Li salt (i.e., LiClO4). The CPE membrane with 10 wt% LSTHF (CPE-10) exhibits conductivities as high as 0.53 mS cm−1 at room temperature (RT) and 0.36 mS cm−1 at 0 °C. Furthermore, prototype batteries, including the CPE-10 electrolyte, show high initial discharge capacities, good rate capabilities, and stable cycling performance at either RT or 5 and 60 °C. This study illustrates that including a Li-conductive perovskite and TMP in a PVDF-based polymer material could yield safe, high-performance quasi-solid-state Li-metal batteries capable of operating over a relatively wide temperature range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. Building better batteries10.1038/451652a ↗
4. Lithium batteries and cathode materials10.1021/cr020731c ↗
5. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
6. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
7. Solvent-free synthesis of thin, flexible, nonflammable garnet-based composite solid electrolyte for all-solid-state lithium batteries
8. Intercalated electrolyte with high transference number for dendrite-free solid-state lithium batteries
9. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
10. Fire-extinguishing organic electrolytes for safe batteries10.1038/s41560-017-0033-8 ↗
11. Non-flammable electrolyte for dendrite-free sodium-sulfur battery10.1016/j.ensm.2019.05.045 ↗
12. Enabling room-temperature solid-state lithium-metal batteries with fluoroethylene carbonate-modified plastic crystal interlayers10.1016/j.ensm.2018.08.021 ↗
13. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
14. Garnet-type solid-state fast Li ion conductors for Li batteries: critical review10.1039/c4cs00020j ↗
15. Fundamentals of inorganic solid-state electrolytes for batteries10.1038/s41563-019-0431-3 ↗
16. Polymer electrolytes for lithium-ion batteries10.1002/(SICI)1521-4095(199804)10:6<439::AID-ADMA439>3.0.CO;2-I ↗
17. Polymer electrolytes for lithium polymer batteries10.1039/C6TA02621D ↗
18. Polymer-based organic batteries10.1021/acs.chemrev.6b00070 ↗
19. Nanocomposite polymer electrolytes for lithium batteries10.1038/28818 ↗
20. Recent advances in all-solid-state rechargeable lithium batteries10.1016/j.nanoen.2017.01.028 ↗
21. Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries10.1016/j.ensm.2020.01.006 ↗
22. Nanohybrid electrolytes for high-energy lithium-ion batteries: recent advances and future challenges10.1088/1361-6528/ab0fb2 ↗
23. Novel organic–inorganic hybrid electrolyte to enable LiFePO4 quasi-solid-state Li-ion batteries performed highly around room temperature10.1021/acsami.6b09008 ↗
24. Improved lithium ionic conductivity in composite polymer electrolytes with oxide-ion conducting nanowires10.1021/acsnano.6b06797 ↗
25. Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and poly(vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
26. A ceramic-pvdf composite membrane with modified interfaces as an ion-conducting electrolyte for solid-state lithium-ion batteries operating at room temperature10.1002/celc.201800643 ↗
27. Dimethyl methylphosphonate (DMMP) as an efficient flame retardant additive for the lithium-ion battery electrolytes10.1016/j.jpowsour.2007.05.001 ↗
28. Enabling non-flammable Li-metal batteries via electrolyte functionalization and interface engineering10.1039/C9TA03784E ↗
29. A theoretical study on the stability and ionic conductivity of the Na11M2PS12 (M=Sn, Ge) superionic conductors10.1016/j.jpowsour.2018.10.077 ↗
30. Anti-perovskite cathodes for lithium batteries10.1039/C7TA11074J ↗
31. Phase stability, electrochemical stability and ionic conductivity of the Li10±1MP2X12 (M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors10.1039/C2EE23355J ↗
32. Data-driven first-principles methods for the study and design of alkali superionic conductors10.1021/acs.chemmater.6b02648 ↗
33. Supercell Program: a combinatorial structure-generation approach for the local-level modeling of atomic substitutions and partial occupancies in crystals10.1186/s13321-016-0129-3 ↗
34. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
35. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
36. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
37. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
38. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
39. Li-ion conduction and stability of perovskite Li3/8Sr7/16Hf1/4Ta3/4O310.1021/acsami.6b03070 ↗
40. A perovskite electrolyte that is stable in moist Air for lithium-ion batteries10.1002/anie.201804114 ↗
41. High ionic conductivity in lithium lanthanum titanate10.1016/0038-1098(93)90841-A ↗
42. Computation‐guided design of LiTaSiO5, a new lithium ionic conductor with sphene structure10.1002/aenm.201803821 ↗
43. Gallium-doped Li7La3Zr2O12 garnet-type electrolytes with high lithium-ion conductivity10.1021/acsami.6b13902 ↗
44. Flexible and ion-conducting membrane electrolytes for solid-state lithium batteries: dispersion of garnet nanoparticles in insulating polyethylene oxide10.1016/j.nanoen.2016.09.002 ↗
45. Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers10.1021/acs.nanolett.5b00600 ↗
46. Ceramic-based composite solid electrolyte for lithium-ion batteries10.1002/cplu.201500106 ↗
47. A hybrid solid electrolyte for flexible solid-state sodium batteries10.1039/C5EE01941A ↗
48. A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery10.1039/C7EE03365F ↗
49. An approach to design highly durable piezoelectric nanogenerator based on self-poled PVDF/AlO-rGO flexible nanocomposite with high power density and energy conversion efficiency10.1002/aenm.201601016 ↗
50. Esr and vibrational spectroscopy study on poly(vinylidene fluoride) membranes with alkaline treatment10.1016/j.jpowsour.2005.05.020 ↗
51. Electrochemical measurement of transference numbers in polymer electrolytes10.1016/0032-3861(87)90394-6 ↗
52. Conductivity and transference number measurements on polymer electrolytes10.1016/0167-2738(88)90304-9 ↗
53. Review on composite polymer electrolytes for lithium batteries10.1016/j.polymer.2006.05.069 ↗
54. Stabilizing polymer electrolytes in high-voltage lithium batteries10.1038/s41467-019-11015-0 ↗
55. Nanoporous adsorption effect on alteration of the Li+ diffusion pathway by a highly ordered porous electrolyte additive for high-rate all-solid-state lithium metal batteries10.1021/acsami.8b06574 ↗
56. Mastering the interface for advanced all-solid-state lithium rechargeable batteries10.1073/pnas.1615912113 ↗
57. A review on electrolyte additives for lithium-ion batteries10.1016/j.jpowsour.2006.07.074 ↗
58. Effect of fluoroethylene carbonate on electrochemical performances of lithium electrodes and lithium-sulfur batteries10.1149/2.101306jes ↗
59. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries
60. Improving cyclability of Li metal batteries at elevated temperatures and its origin revealed by cryo-electron microscopy10.1038/s41560-019-0413-3 ↗
61. Safety-reinforced poly(propylene carbonate)-based all-solid-state polymer electrolyte for ambient-temperature solid polymer lithium batteries10.1002/aenm.201501082 ↗
62. Eutectogels: a new class of solid composite electrolytes for Li/Li-ion batteries10.1021/acs.chemmater.7b03736 ↗
63. A borate decorated anion-immobilized solid polymer electrolyte for dendrite-free, long-life Li metal batteries10.1039/C9TA07551H ↗
64. Amorphous modified silyl-terminated 3D polymer electrolyte for high-performance lithium metal battery10.1016/j.nanoen.2017.10.021 ↗