journal article·2015-12

Design of a dual-layer ceramic interconnect based on perovskite oxides for segmented-in-series solid oxide fuel cells

Beom-Kyeong Park, Dae-Wi Kim, Rak-Hyun Song, Seung-Bok Lee, Tak-Hyoung Lim, Seok-Joo Park, Chong-Ook Park, Jong-Won Lee

Publisher page

Abstract

Abstract A segmented-in series (SIS) SOFC consists of segmented unit cells connected in electrical series and shows improved stack efficiency over conventional SOFCs. In this design, a thin interconnect film provides both electrical contact and sealing between the anode of one cell and the cathode of the next; thus, it should have high conductivity and chemical/structural stability in both reducing and oxidizing atmospheres as well as impermeability to gases. Here, we report a dual-layer interconnect film for SIS–SOFCs comprising perovskite-type oxides, Sr 0.7 La 0.2 TiO 3 (exposed to a reducing atmosphere) and La 0.8 Sr 0.2 FeO 3 (exposed to an oxidizing atmosphere). The interconnect film is not only very dense but also highly conductive and stable under SOFC operating conditions; in particular, it shows an area-specific resistance of 19.6 mΩ cm 2 at 800 °C, which is much lower than the generally accepted limit for SOFCs. A flat-tubular SIS–SOFC fabricated using these interconnect films exhibits a power density as high as 340 mW cm −2 , which proves the feasibility of the dual-layer interconnect design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
2. Development of novel micro flat-tube solid-oxide fuel cells10.1016/j.elecom.2011.04.019 ↗
3. Recent developments in solid oxide fuel cell materials10.1002/1615-6854(200107)1:2<117::AID-FUCE117>3.0.CO;2-Y ↗
4. A tubular segmented-in-series solid oxide fuel cell with metallic interconnect films: a performance study through mathematical simulations10.1016/j.cap.2013.07.025 ↗
5. Effect of cathode sheet resistance on segmented-in-series SOFC power density10.1016/j.jpowsour.2006.10.075 ↗
6. Performance of cone-shaped tubular anode-supported segmented-in-series solid oxide fuel cell stack fabricated by dip coating technique10.1016/j.ijhydene.2009.07.004 ↗
7. Segmented cell testing for cathode parameter investigation10.1016/j.jpowsour.2010.08.034 ↗
8. Residual stress and redox cycling of segmented-in-series solid oxide fuel cells10.1016/j.jpowsour.2011.01.022 ↗
9. SOFC technology development at Rolls-Royce10.1016/S0378-7753(99)00428-0 ↗
10. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
11. Liquid phase sintering of LaCrO310.1016/0955-2219(92)90063-J ↗
12. Sintering behavior of Ca- or Sr-doped LaCrO3 perovskites including second phase of AECrO4 (AE = Sr, Ca) in air10.1016/S0167-2738(00)00372-6 ↗
13. Lanthanum chromite-based interconnects as key materials for SOFC stack development10.1111/j.1744-7402.2004.tb00151.x ↗
14. Electrical properties of yttrium-doped strontium titanate under reducing conditions10.1149/1.1420706 ↗
15. Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate10.1016/S0167-2738(02)00140-6 ↗
16. Thermal expansion properties of Sr1-xLaxTiO3 (0 ≤ x ≤ 0.3) perovskites in oxidizing and reducing atmospheres10.1149/1.3481458 ↗
17. La-doped SrTiO3 interconnect materials for anode-supported flat-tubular solid oxide fuel cells10.1016/j.ijhydene.2011.10.125 ↗
18. Bi-layer structures as solid oxide fuel cell interconnections10.1016/j.jpowsour.2005.02.093 ↗
19. Performance of an anode-supported tubular solid oxide fuel cells stack with two single cells connected by a co-sintered ceramic interconnector10.1016/j.ijhydene.2011.01.084 ↗
20. A novel bilayered Sr0.6La0.4TiO3/La0.8Sr0.2MnO3 interconnector for anode-supported tubular solid oxide fuel cell via slurry-brushing and co-sintering process10.1016/j.jpowsour.2010.07.088 ↗
21. A flat-tubular solid oxide fuel cell with a dense interconnect film coated on the porous anode support10.1016/j.jpowsour.2012.04.025 ↗
22. Redox-induced performance degradation of anode-supported tubular solid oxide fuel cells10.1016/j.ijhydene.2010.10.038 ↗
23. Stability of the perovskite phase LaBO3 (B = V, Cr, Mn, Fe, Co, Ni) in reducing atmosphere I. Experimental results10.1016/0025-5408(79)90048-5 ↗
24. Combustion synthesis and characterization of Sr and Ga doped LaFeO310.1016/S0167-2738(99)00031-4 ↗
25. Potential electrode/electrolyte interactions in solid oxide fuel cells
26. Mechanism of reaction between lanthanum manganite and yttria-stabilized zirconia10.1111/j.1151-2916.1992.tb08193.x ↗
27. Reaction between solid oxide fuel cell materials10.1016/0167-2738(92)90218-E ↗
28. Interactions between a thick film LaMnO3 cathode and YSZ SOFC electrolyte during high temperature ageing10.1016/0167-2738(95)00010-4 ↗
29. Interaction between La(Sr)FeO3 SOFC cathode and YSZ electrolyte10.1016/S0167-2738(03)00158-9 ↗
30. SIMS study of transition metal transport in single crystalline yttria stabilised zirconia10.1039/B315294D ↗
31. Interface chemistry in LSM–YSZ composite SOFC cathodes10.1016/j.ssi.2006.08.011 ↗
32. Reactivity between La(Sr)FeO3 cathode, doped CeO2 interlayer and yttria-stabilized zirconia electrolyte for solid oxide fuel cell applications10.1016/j.jpowsour.2008.06.049 ↗
33. SOFC LSM: YSZ cathode degradation induced by moisture: an impedance spectroscopy study10.1016/j.ssi.2011.02.019 ↗