Co-generation of electricity and syngas on proton-conducting solid oxide fuel cell with a perovskite layer as a precursor of a highly efficient reforming catalyst
Source abstract
Abstract
Abstract In this study, a proton conducting solid oxide fuel cell (layered H+-SOFC) is prepared by introducing a La2NiO4perovskite oxide with a Ruddlesden-Popper structure as a catalyst layer onto a conventional NiO + BaZr0.4Ce0.4Y0.2O3-δ (NiO + BZCY4) anode for in situ CO2 dry reforming of methane. The roles of the La2NiO4 catalyst layer on the reforming activity, coking tolerance, electrocatalytic activity and operational stability of the anodes are systematically studied. The La2NiO4 catalyst layer exhibits greater catalytic performance than the NiO + BZCY4 anode during the CO2 dry reforming of methane. An outstanding coking resistance capability is also demonstrated. The layered H+-SOFC consumes H2 produced in situ at the anode and delivers a much higher power output than the conventional cell with the NiO + BZCY4 anode. The improved coking resistance of the layered H+-SOFC results in a steady output voltage of ∼0.6 V under a constant current density of 200 mA cm−2. In summary, the H+-SOFC with La2NiO4 perovskite oxide is a potential energy conversion device for CO2 conversion and utilization with co-generation of electricity and syngas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysts for Methane Reforming · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Frontiers, opportunities, and challenges in biochemical and chemical catalysis of CO2 fixation10.1021/cr300463y ↗
2. A review of dry (CO2) reforming of methane over noble metal catalysts10.1039/C3CS60395D ↗
3. Production of synthesis gas by carbon dioxide reforming of methane over nickel based and perovskite catalysts10.1016/j.proeng.2013.01.065 ↗
4. Electric power and synthesis gas co-generation from methane with zero waste gas emission10.1002/anie.201006855 ↗
5. Nickel catalyst prepared via glycine nitrate process for partial oxidation of methane to syngas10.1016/j.catcom.2007.12.009 ↗
6. Electric power and syngas from methane-an energy-efficient combination of a single-chamber fuel cell and downstream catalytic equilibration10.1002/anie.201100597 ↗
7. An all porous solid oxide fuel cell (SOFC): a bridging technology between dual and single chamber SOFCs10.1039/c3ee40131f ↗
8. Novel layered solid oxide fuel cells with multiple-twinned Ni0.8Co0.2 nanoparticles: the key to thermally independent CO2 utilization and power-chemical cogeneration10.1039/C5EE03017J ↗
9. Electrocatalytic reforming of carbon dioxide by methane in SOFC system10.1016/j.cattod.2003.10.017 ↗
10. Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels10.1021/cr300491e ↗
11. Optimizing the modification method of zinc-enhanced sintering of BaZr0.4Ce0.4Y0.2O3−δ-based electrolytes for application in an anode-supported protonic solid oxide fuel cell10.1016/j.ijhydene.2010.03.039 ↗
12. Mathematical modeling of ammonia-fed solid oxide fuel cells with different electrolytes10.1016/j.ijhydene.2008.07.021 ↗
13. Anode-engineered protonic ceramic fuel cell with excellent performance and fuel compatibility
14. Advanced materials for SOFC application: strategies for the development of highly conductive and stable solid oxide proton electrolytes10.1016/j.pmatsci.2015.08.001 ↗
15. Numerical analysis of mass and heat transport in proton-conducting SOFCs with direct internal reforming10.1016/j.apenergy.2015.03.037 ↗
16. Enhanced electrochemical performance, water storage capability and coking resistance of a Ni+BaZr0.1Ce0.7Y0.1Yb0.1O3−δ anode for solid oxide fuel cells operating on ethanol10.1016/j.ces.2014.12.011 ↗
17. Protonic ceramic fuel cells for high-efficiency operation with methane10.1016/S0378-7753(03)00072-7 ↗
18. The catalytic conversion of natural gas to useful products10.1016/0920-5861(96)00035-1 ↗
19. Synthesis, stability and conductivity of BaCe0.8−xZrxY0.2O3−δ as electrolyte for proton conducting SOFC10.1016/j.ijhydene.2011.04.106 ↗
20. Zirconium doping effect on the performance of proton-conducting BaZryCe0.8−yY0.2O3−δ (0.0≤y≤0.8) for fuel cell applications10.1016/j.jpowsour.2009.03.044 ↗
21. On the development of proton conducting materials for technological applications10.1016/S0167-2738(97)00082-9 ↗
22. Materials challenges toward proton-conducting oxide fuel cells: a critical review10.1039/b902343g ↗
23. An octane-fueled solid oxide fuel cell10.1126/science.1109213 ↗
24. CO2 reforming of CH4 over La–Ni based perovskite precursors10.1016/j.apcata.2006.06.024 ↗
25. Dry reforming of methane over Ni perovskite type oxides10.1016/j.cattod.2005.07.010 ↗
26. Carbon dioxide reforming of methane over La2NiO4 as catalyst precursor-Characterization of carbon deposition10.1016/j.cattod.2007.12.075 ↗
27. Kinetic investigation of CO2 reforming of CH4 over La–Ni based perovskite10.1016/j.cej.2010.06.006 ↗
28. Advanced symmetric solid oxide fuel cell with an infiltrated K2NiF4-Type La2NiO4 electrode10.1021/ef401473w ↗
29. A novel way to improve performance of proton-conducting solid-oxide fuel cells through enhanced chemical interaction of anode components10.1016/j.ijhydene.2010.10.081 ↗
30. Syngas production from reforming of methane with CO2 and O2 over LaNi1-xCoxO3 perovskites
31. Nanocast LaNiO3 perovskites as precursors for the preparation of coke-resistant dry reforming catalysts10.1021/cs500918c ↗
32. LaNiO3 as a precursor of Ni/La2O3 for CO2 reforming of CH4: effect of the presence of an amorphous NiO phase10.1016/j.apcatb.2012.04.044 ↗
33. Comparative study of carbon dioxide reforming of methane to synthesis gas over Ni/La2O3 and conventional nickel-based catalysts10.1021/jp951809e ↗