journal article·2018-04

Passivation of interstitial and vacancy mediated trap-states for efficient and stable triple-cation perovskite solar cells

Md Arafat Mahmud, Naveen Kumar Elumalai, Mushfika Baishakhi Upama, Dian Wang, Vinicius R. Gonçales, Matthew Wright, Cheng Xu, Faiazul Haque, Ashraf Uddin

Publisher page

Abstract

Abstract The current work reports the concurrent passivation of interstitial and oxygen vacancy mediated defect states in low temperature processed ZnO electron transport layer (ETL) via Ultraviolet-Ozone (UVO) treatment for fabricating highly efficient (maximum efficiency: 16.70%), triple cation based MA0.57FA0.38Rb0.05PbI3 (MA: methyl ammonium, FA: formamidinium, Rb: rubidium) perovskite solar cell (PSC). Under UV exposure, ozone decomposes to free atomic oxygen and intercalates into the interstitial and oxygen vacancy induced defect sites in the ZnO lattice matrix, which contributes to suppressed trap-assisted recombination phenomena in perovskite device. UVO treatment also reduces the content of functional hydroxyl group on ZnO surface, that increases the inter-particle connectivity and grain size of perovskite film on UVO treated ZnO ETL. Owing to this, the perovskite film atop UVO treated ZnO film exhibits reduced micro-strain and dislocation density values, which contribute to the enhanced photovoltaic performance of PSC with modified ZnO ETL. The modified PSCs exhibit higher recombination resistance (RRec) ∼40% compared to pristine ZnO ETL based control devices. Adding to the merit, the UVO treated ZnO PSC also demonstrates superior device stability, retaining about 88% of its initial PCE in the course of a month-long, systematic degradation study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
4. High performance planar perovskite solar cells by ZnO electron transport layer engineering10.1016/j.nanoen.2017.07.013 ↗
5. High-efficiency robust perovskite solar cells on ultrathin flexible substrates10.1038/ncomms10214 ↗
6. Low-temperature solution-processed Li-doped SnO2 as an effective electron transporting layer for high-performance flexible and wearable perovskite solar cells10.1016/j.nanoen.2016.04.060 ↗
7. Highly efficient flexible perovskite solar cells using solution-derived NiOx hole contacts10.1021/acsnano.5b08135 ↗
8. High-performance flexible perovskite solar cells exploiting Zn2SnO4 prepared in solution below 100 °C10.1038/ncomms8410 ↗
9. 16.1% efficient hysteresis-free mesostructured perovskite solar cells based on synergistically improved ZnO nanorod arrays10.1002/aenm.201500568 ↗
10. Low-temperature operation of perovskite solar cells: with efficiency improvement and hysteresis-less10.1016/j.nanoen.2016.08.016 ↗
11. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
12. Controlled nucleation assisted restricted volume solvent annealing for stable perovskite solar cells10.1016/j.solmat.2017.03.032 ↗
13. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
14. Controlled Ostwald ripening mediated grain growth for smooth perovskite morphology and enhanced device performance10.1016/j.solmat.2017.03.034 ↗
15. A high performance and low-cost hole transporting layer for efficient and stable perovskite solar cells10.1039/C7CP03551A ↗
16. Effect of UV-ozone process on the ZnO interlayer in[space]the inverted organic solar cells10.1039/C6RA25177C ↗
17. Electronic transport properties in pollycrystalline ZnO thin films
18. Cesium compounds as interface modifiers for stable and efficient perovskite solar cells10.1016/j.solmat.2017.08.032 ↗
19. Simultaneous enhancement in stability and efficiency of low-temperature processed perovskite solar cells10.1039/C6RA14186B ↗
20. Aluminum-Doped zinc oxide as highly stable electron collection layer for perovskite solar cells10.1021/acsami.6b00520 ↗
21. Magnesium-doped zinc oxide as electron selective contact layers for efficient perovskite solar cells10.1002/cssc.201600860 ↗
22. Decomposition of organometal halide perovskite films on zinc oxide nanoparticles10.1021/acsami.5b04695 ↗
23. Efficient planar-heterojunction perovskite solar cells achieved via interfacial modification of a sol-gel ZnO electron collection layer10.1039/C4TA03954H ↗
24. Analysis of electron transfer properties of ZnO and TiO2 photoanodes for dye-sensitized solar cells10.1021/nn405535j ↗
25. ZnO – nanostructures, defects, and devices10.1016/S1369-7021(07)70078-0 ↗
26. Enhanced charge transport and photovoltaic performance of PBDTTT-C-T/PC70BM solar cells via UV-ozone treatment10.1039/c3nr03355d ↗
27. Investigation of the effects of atomic oxygen exposure on the electrical and field emission properties of ZnO nanowires10.1016/j.apsusc.2012.12.100 ↗
28. Low temperature processed ZnO thin film as electron transport layer for efficient perovskite solar cells10.1016/j.solmat.2016.09.014 ↗
29. Effect of ZnO processing on the photovoltage of ZnO/poly(3-hexylthiophene) solar cells10.1021/jp802626u ↗
30. Inverted organic solar cells based on aqueous processed ZnO interlayers at low temperature10.1063/1.4719201 ↗
31. Perovskite solar cells: progress and advancements10.3390/en9110861 ↗
32. Hysteresis in organic-inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.06.025 ↗
33. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
34. Enhanced stability of low temperature processed perovskite solar cells via augmented polaronic intensity of hole transporting layer10.1002/pssr.201600315 ↗
35. Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells10.1016/j.nanoen.2014.08.015 ↗
36. A high performance and low-cost hole transporting layer for efficient and stable perovskite solar cells10.1039/C7CP03551A ↗
37. Inverted polymer solar cells with sol-gel derived cesium-doped zinc oxide thin film as a buffer layer10.1007/s13391-014-3374-5 ↗
38. Role of fullerene electron transport layer on the morphology and optoelectronic properties of perovskite solar cells10.1016/j.orgel.2017.08.001 ↗
39. Highly flexible InSnO electrodes on thin colourless polyimide substrate for high-performance flexible CH3NH3PbI3 perovskite solar cells10.1016/j.jpowsour.2016.12.026 ↗
40. Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
41. Solution-processed lithium-doped ZnO electron transport layer for efficient triple cation (Rb, MA, FA) perovskite solar cells10.1021/acsami.7b09153 ↗
42. Adsorbed carbon nanomaterials for surface and interface-engineered stable rubidium multi-cation perovskite solar cells10.1039/C7NR06812C ↗
43. Single vs mixed organic cation for low temperature processed perovskite solar cells10.1016/j.electacta.2016.11.132 ↗
44. Low temperature two-step solution process for perovskite solar cells with planar structure
45. Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber10.1039/C7TA03331A ↗
46. Iodine-doped ZnO nanopillar arrays for perovskite solar cells with high efficiency up to 18.24%10.1039/C7TA03150E ↗
47. High performance and high stability low temperature aqueous solution-derived Li-Zr co-doped ZnO thin film transistors10.1039/c2jm15526e ↗
48. Ferromagnetism in Li doped ZnO nanoparticles: the role of interstitial Li
49. Switch ‘on’ and ‘off’ ferromagnetic ordering through the induction and removal of oxygen vacancies and carriers in doped ZnO: a magnetization and electronic structure study10.1002/pssa.200925637 ↗
50. Efficient and highly air stable planar inverted perovskite solar cells with reduced graphene oxide doped PCBM electron transporting layer10.1002/aenm.201602120 ↗
51. Enhanced photovoltaic performance of inverted hybrid bulk-heterojunction solar cells using TiO2/reduced graphene oxide films as electron transport layers
52. Improving the performance of perovskite solar cells with glycerol-doped PEDOT: PSS buffer layer
53. Ionic reactivity at contacts and aging of methylammonium lead triiodide perovskite solar cells10.1002/aenm.201502246 ↗
54. Origin of the thermal instability in CH3NH3PbI3 thin films deposited on ZnO10.1021/acs.chemmater.5b01598 ↗
55. High-efficiency semitransparent organic solar cells with non-fullerene acceptor for window application10.1021/acsphotonics.7b00618 ↗
56. High performance semitransparent organic solar cells with 5% PCE using non-patterned MoO3/Ag/MoO3 anode10.1016/j.cap.2016.12.010 ↗
57. A promising alternative solvent of perovskite to induce rapid crystallization for high-efficiency photovoltaic devices10.1039/C4RA16253F ↗
58. Identification and characterization of the intermediate phase in hybrid organic-inorganic MAPbI3 perovskite10.1039/C5DT04420K ↗
59. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
60. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
61. Film grain-size related long-term stability of inverted perovskite solar cells10.1002/cssc.201600887 ↗
62. Origin of the high performance of perovskite solar cells with large grains
63. Growth optimization of ZnS zns thin films by RF magnetron sputtering as prospective buffer layer in thin film solar cells
64. Influence of thickness and substrate temperature on electrical and photoelectrical properties of vacuum-deposited CdSe thin films10.1016/S0254-0584(02)00211-0 ↗
65. Green · 1982
66. Interfacial degradation of planar lead halide perovskite solar cells10.1021/acsnano.5b03687 ↗
67. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗
68. Enhanced ambient stability of efficient perovskite solar cells by employing a modified fullerene cathode interlayer10.1002/advs.201600027 ↗
69. Effect of annealing dependent blend morphology and dielectric properties on the performance and stability of non-fullerene organic solar cells10.1016/j.solmat.2017.11.027 ↗
70. Enhanced perovskite electronic properties via a modified lead(ii) chloride Lewis acid-base adduct and their effect in high-efficiency perovskite solar cells10.1039/C6TA11139D ↗
71. Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells10.1039/C6MH00160B ↗
72. Influences of dopant concentration in sol–gel derived AZO layer on the performance of P3HT: PCBM based inverted solar cell10.1016/j.solmat.2012.12.033 ↗
73. On Mott-Schottky analysis interpretation of capacitance measurements in organometal perovskite solar cells10.1063/1.4966127 ↗
74. Capacitive dark currents, hysteresis, and electrode polarization in lead halide perovskite solar cells10.1021/acs.jpclett.5b00480 ↗
75. Ionic charging by local imbalance at interfaces in hybrid lead halide perovskites10.1063/1.4941033 ↗
76. Slow dynamic processes in lead halide perovskite solar cells. Characteristic times and hysteresis10.1021/jz5011187 ↗
77. 16.1% efficient hysteresis-free mesostructured perovskite solar cells based on synergistically improved ZnO nanorod arrays10.1002/aenm.201500568 ↗
78. Efficient and low-temperature processed perovskite solar cells based on a cross-linkable hybrid interlayer10.1039/C5TA04695E ↗
79. Fast and low temperature growth of electron transport layers for efficient perovskite solar cells10.1039/C4TA06416J ↗
80. High-performance, air-stable, low-temperature processed semitransparent perovskite solar cells enabled by atomic layer deposition10.1021/acs.chemmater.5b01933 ↗
81. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications10.1038/ncomms9932 ↗
82. Parameters influencing the growth of ZnO nanowires as efficient low temperature flexible perovskite-based solar cells10.3390/ma9010060 ↗
83. HC(NH2)2PbI3 as a thermally stable absorber for efficient ZnO-based perovskite solar cells10.1039/C6TA01074A ↗
84. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
85. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
86. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
87. Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes10.1002/admi.201500195 ↗
88. N. Ahn, K. Kwak, M.S. Jang, H. Yoon, B.Y. Lee, J.-K. Lee, P.V. Pikhitsa, J. Byun, M. Choi, Trapped charge-driven degradation of perovskite solar cells, 7 (2016) 13422.
89. Investigation of the hydrolysis of perovskite organometallic halide CH3NH3PbI3 in humidity environment10.1038/srep21976 ↗