journal article·2021-04

Achieving excellent and durable CO2 electrolysis performance on a dual-phase fuel electrode in solid oxide electrolysis cells

Yihang Li, Yanpu Li, Lixiang Yu, Qicheng Hu, Qi Wang, Kristina Maliutina, Liangdong Fan

Publisher page

Abstract

Abstract Conversion of CO2 into valuable chemicals through solid oxide electrolysis cells (SOECs) is a promising technology towards efficient utilization of CO2 and reducing its emission. However, the well-established Ni-cermet fuel electrode is not applicable for high-concentration or pure CO2 electrolysis due to the Ni oxidation and coking issues. Here, we report that a novel nominal Pr0.2Ca0.8Fe0.8Ni0.2O3-δ perovskite fuel electrode, which is self-assembled into Pr(Ca)Fe(Ni)O3-δ perovskite and Ca2Fe2O5 brownmillerite dual-phase composite during the calcination process, possesses efficient CO2 electrolysis activity. The presence of Ca2Fe2O5 with abundant oxygen vacancies significantly improves CO2 chemical adsorption and activation and Pr(Ca)Fe(Ni)O3-δ serves charge carrier matrix, and consequently leads to a high CO2 reduction reaction rate constant of 1.104 × 10−4 cm−1 at 800 °C as determined by the electrical conductivity relaxation method. The electrochemical performance of pure CO2 electrolysis is investigated in model SOECs, exhibiting an excellent current density of 0.648 Acm−2 at 1.5 V and 800 °C. Moreover, the cell shows no noticeable degradation under two constant current densities of 0.421 Acm−2 at 800 °C and 0.3 Acm−2 at 700 °C for nearly a total of 300 h. The present study reveals a novel strategy to develop dual-phase Pr(Ca)Fe(Ni)O3-δ-Ca2Fe2O5 materials as a reliable electrode for pure CO2 electrolysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. High temperature electrolysis in alkaline cells, solid proton conducting cells, and solid oxide cells10.1021/cr5000865 ↗
2. A review of high temperature co-electrolysis of H2O and CO2 to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology10.1039/C6CS00403B ↗
3. Nanomaterials and technologies for low temperature solid oxide fuel cells: recent advances, challenges and opportunities10.1016/j.nanoen.2017.12.044 ↗
4. Electrochemical reduction of CO2 in solid oxide electrolysis cells10.1016/j.jechem.2017.04.004 ↗
5. Reliability of CO2 electrolysis by solid oxide electrolysis cells with a flat tube based on a composite double-sided air electrode10.1016/j.compositesb.2019.02.012 ↗
6. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
7. Results of recent high temperature coelectrolysis studies at the Idaho National Laboratory10.1016/j.ijhydene.2008.08.029 ↗
8. High-temperature electrolysis for large-scale hydrogen production from nuclear energy - experimental investigations10.1016/j.ijhydene.2009.10.045 ↗
9. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
10. A robust solid oxide electrolyzer for highly efficient electrochemical reforming of methane and steam10.1039/C9TA00467J ↗
11. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
12. Review—electrochemical CO2 reduction for CO production: comparison of low- and high-temperature electrolysis technologies10.1149/1945-7111/ab7099 ↗
13. Robust redox-reversible perovskite type steam electrolyser electrode decorated with in situ exsolved metallic nanoparticles10.1039/C9TA06309A ↗
14. Highly stable and efficient catalyst with in situ exsolved Fe–Ni alloy nanospheres socketed on an oxygen deficient perovskite for direct CO2 electrolysis10.1021/acscatal.6b01555 ↗
15. In situ investigation of reversible exsolution/dissolution of CoFe alloy nanoparticles in a Co-doped Sr2Fe1.5Mo0.5O6−δ cathode for CO2 electrolysis10.1002/adma.201906193 ↗
16. Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures10.1038/ncomms14785 ↗
17. Highly stable Sr-free cobaltite-based perovskite cathodes directly assembled on a barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells10.1002/cssc.201601645 ↗
18. Degradation of solid oxide cells during co-electrolysis of steam and carbon dioxide at high current densities10.1016/j.jpowsour.2016.08.055 ↗
19. Carbon deposition in solid oxide cells during Co-electrolysis of H2O and CO210.1149/2.079403jes ↗
20. A comparative study of durability of solid oxide electrolysis cells tested for Co-electrolysis under galvanostatic and potentiostatic conditions10.1149/2.0151810jes ↗
21. Perovskite oxyfluoride electrode enabling direct electrolyzing carbon dioxide with excellent electrochemical performances
22. Mixed-conductor Sr2Fe1.5Mo0.5O6−δ as robust fuel electrode for pure CO2 reduction in solid oxide electrolysis cell10.1021/acssuschemeng.7b02511 ↗
23. A self-recovering robust electrode for highly efficient CO2 electrolysis in symmetrical solid oxide electrolysis cells10.1039/C9TA00643E ↗
24. Remarkable chemical adsorption of manganese-doped titanate for direct carbon dioxide electrolysis10.1039/C4TA00344F ↗
25. Recent advances of CO2 electrochemical reduction in solid oxide electrolysis cells
26. Achieving strong chemical adsorption ability for efficient carbon dioxide electrolysis10.1016/j.apcatb.2020.118968 ↗
27. CO2 electroreduction enhanced by transitional layer at cathode/electrolyte interface10.1016/j.jpowsour.2020.227743 ↗
28. First-principles based microkinetic modeling of CO2 reduction at the Ni/SDC cathode of a solid oxide electrolysis cell10.1021/acs.jpcc.8b05312 ↗
29. The formation of performance enhancing pseudo-composites in the highly active La1-xCaxFe0.8Ni0.2O3 system for IT-SOFC application10.1002/adfm.201300481 ↗
30. A novel one step synthesized Co-free perovskite/brownmillerite nanocomposite for solid oxide fuel cells10.1039/c1jm10911a ↗
31. The effect of group IIIA oxides on the oxygen reduction reaction at cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.compositesb.2020.107924 ↗
32. Fast, reversible CO2 capture in nanostructured Brownmillerite CaFeO2.510.1016/j.nanoen.2014.10.016 ↗
33. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRT tools10.1016/j.electacta.2015.09.097 ↗
34. Optimal regularization in distribution of relaxation times applied to electrochemical impedance spectroscopy: ridge and lasso regression methods - a theoretical and experimental study10.1016/j.electacta.2014.09.058 ↗
35. Ion–electron transport in strontium ferrites: relationships with structural features and stability10.1016/j.solidstatesciences.2004.05.002 ↗
36. Enhancing CO2 catalytic activation and direct electroreduction on in-situ exsolved Fe/MnOx nanoparticles from (Pr,Ba)(2)Mn2-yFeyO5+delta layered perovskites for SOEC cathodes10.1016/j.apcatb.2019.118389 ↗
37. Pd single site-anchored perovskite cathode for CO2 electrolysis in solid oxide electrolysis cells10.1016/j.nanoen.2020.104598 ↗
38. Alkaline-earth elements (Ca, Sr and Ba) doped LaFeO3-δ cathodes for CO2 electroreduction10.1016/j.jpowsour.2019.227268 ↗
39. Efficient conversion of CO2 in solid oxide electrolytic cells with Pd doped perovskite cathode on ceria nanofilm interlayer10.1016/j.jcou.2016.11.014 ↗
40. Effect of Gd0.2Ce0.8O1.9 nanoparticles on the oxygen evolution reaction of La0.6Sr0.4Co0.2Fe0.8O3-δ anode in solid oxide electrolysis cell10.1016/S1872-2067(18)63118-3 ↗
41. Direct electrolysis of CO2 in symmetrical solid oxide electrolysis cell based on La0.6Sr0.4Fe0.8Ni0.2O3-δ electrode10.1149/2.0351802jes ↗
42. Enhancing electrocatalytic CO2 reduction in solid oxide electrolysis cell with Ce0.9Mn0.1O2−δ nanoparticles-modified LSCM-GDC cathode10.1016/j.jcat.2017.12.027 ↗
43. Electrochemical reduction of CO2 in a symmetrical solid oxide electrolysis cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ electrode10.1016/j.jcou.2019.07.021 ↗
44. Pr and Mo Co‐doped SrFeO3–δ as an efficient cathode for pure CO2 reduction reaction in a solid oxide electrolysis cell10.1002/ente.202070101 ↗
45. Composite ceramic cathode La0.9Ca0.1Fe0.9Nb0.1O3-δ/Sc0.2Zr0.8O2−δ towards efficient carbon dioxide electrolysis in zirconia-based high temperature electrolyser10.1016/j.ijhydene.2017.04.291 ↗
46. The electrochemical performance and CO2 reduction mechanism on strontium doped lanthanum ferrite fuel electrode in solid oxide electrolysis cell10.1016/j.electacta.2018.07.187 ↗
47. Understanding CO2 electrochemical reduction kinetics of mixed-conducting cathodes by the electrical conductivity relaxation method
48. Electrical conductivity relaxation of Sr2Fe1.5Mo0.5O6-δ-Sm0.2Ce0.8O1.9 dual-phase composites10.1039/C3TA12787G ↗
49. Chemical relaxation in porous ionic–electronic conducting materials represented by the distribution of characteristic times10.1039/D0TA05613H ↗
50. Ni infiltrated Sr2Fe1.5Mo0.5O6-δ-Ce0.8Sm0.2O1.9 electrode for methane assisted steam electrolysis process10.1016/j.elecom.2017.04.018 ↗
51. A novel PrBaCo2O5+σ-BaZr0.1Ce0.7Y0.1Yb0.1O3 composite cathode for proton-conducting solid oxide fuel cells10.1016/j.compositesb.2020.107936 ↗
52. Efficient CO2 electroreduction on a solid oxide electrolysis cell with La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.2Ce0.8O2-δ infiltrated electrode10.1016/j.jpowsour.2019.226730 ↗
53. Enhancing cathode performance for CO2 electrolysis with Ce0.9M0.1O2-δ (M=Fe, Co, Ni) catalysts in solid oxide electrolysis cell10.1016/j.jechem.2019.02.007 ↗
54. Iron stabilized 1/3 A-site deficient La–Ti–O perovskite cathodes for efficient CO2 electroreduction10.1039/D0TA08088H ↗