journal article·2021-04Open access

Comparison of thyristor and insulated-gate bipolar transistor -based power supply topologies in industrial water electrolysis applications

Joonas Koponen, Anton Poluektov, Vesa Ruuskanen, Antti Kosonen, Markku Niemelä, Jero Ahola

Abstract

Abstract The demand for green hydrogen is growing as the increasing production of pure hydrogen can no longer be based on fossil hydrocarbons. As water electrolysis would move from niche to a significant consumer of emission-free electricity, the efficiency of electrolytic gas production, lifetime of water electrolysis systems, and balance in the electricity grid become essential. The operational and investment costs of an industrial-scale alkaline water electrolyzer with four practical rectifier topologies are investigated. The results show thyristor-based rectifiers provide poor quality for the AC and DC sides, which leads to nonoptimal specific energy consumption (SEC) of the water electrolyzer and a notable reactive power component. Transistor-based topologies may offer up to 4.5% lower SEC of the electrolyzer than the conventional 6-pulse thyristor bridge. The reactive power results in additional costs in either investments in compensation equipment or regular allowance costs. An additional DC/DC converter can be installed to improve the power quality for the electrolyzer, but the second conversion stage adds to the system complexity and cost without eliminating reactive power. A modular single-stage rectifier based on insulated-gate bipolar transistor (IGBT) bridges is suggested as an alternative to provide improved power quality for both the electrolyzer and the electricity grid.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Microgrid Control and Optimization · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Allen · 2018
2. Chardonnet · 2017
3. 2019
4. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: a review10.1016/j.rser.2017.09.003 ↗
5. Hydrogen as a long-term, large-scale energy storage solution when coupled with renewable energy sources or grids with dynamic electricity pricing schemes10.1016/j.ijhydene.2020.04.163 ↗
6. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
7. Frontier Economics · 2018
8. Global energy system based on 100% renewable energy — power, heat, transport, and desalination sectors
9. The European Commission
10. Life cycle assessment of H2O electrolysis technologies10.1016/j.ijhydene.2020.05.282 ↗
11. Large current rectifiers: state of the art and future trends10.1109/TIE.2005.843949 ↗
12. High-current variable-voltage rectifiers: state of the art topologies10.1049/iet-pel.2014.0533 ↗
13. Influence of the power supply on the energy efficiency of an alkaline water electrolyser10.1016/j.ijhydene.2009.02.017 ↗
14. Impact of the current fluctuation on the efficiency of alkaline water electrolysis10.1016/j.ijhydene.2016.11.142 ↗
15. Effect of converter topology on the specific energy consumption of alkaline water electrolyzers10.1109/TPEL.2018.2876636 ↗
16. Influence of rectifiers on the energy demand and gas quality of alkaline electrolysis systems in dynamic operation10.1016/j.apenergy.2019.05.014 ↗
17. Influence of rectifiers on the techno-economic performance of alkaline electrolysis in a smart grid environment10.1016/j.renene.2020.05.115 ↗
18. Implementation of hybrid filter for 12-pulse thyristor rectifier supplying high-current variable-voltage DC load10.1109/TIE.2015.2393833 ↗
19. Power quality and reactive power of water electrolyzers supplied with thyristor converters10.1016/j.jpowsour.2020.228075 ↗
20. Design and control of an LCL-filter-based three-phase active rectifier10.1109/TIA.2005.853373 ↗
21. A novel control scheme of a parallel current-controlled PWM inverter10.1109/28.158825 ↗
22. Interleaved PWM with discontinuous space-vector modulation10.1109/63.788496 ↗
23. Shunt active-power-filter topology based on parallel interleaved inverters10.1109/TIE.2007.907671 ↗
24. Power quality estimation of water electrolyzers based on current and voltage measurements10.1016/j.jpowsour.2019.227603 ↗
25. Fuel cell high-power applications10.1109/MIE.2008.930365 ↗
26. Laaksonen · 2018
27. 2015
28. Impact of weighted average cost of capital, capital expenditure, and other parameters on future utility-scale PV levelised cost of electricity10.1002/pip.3189 ↗
29. Fingrid
30. Bertuccioli · 2014
31. A perspective on low-temperature water electrolysis — challenges in alkaline and acidic technology10.20964/2018.02.26 ↗
32. Electrolyzer durability at low catalyst loading and with dynamic operation10.1149/2.0231915jes ↗
33. Diodes and thyristor ― past, presence and future
34. Transitioning to physics-of-failure as a reliability driver in power electronics10.1109/JESTPE.2013.2290282 ↗