Modified P3HT materials as hole transport layers for flexible perovskite solar cells
Source abstract
Abstract
Abstract Flexible perovskite solar cells (f-PSCs) are light-weight, conformal and thus ideal for seamless integration of photovoltaics onto wearable and portable electronics. Nevertheless, the spread of f-PSCs is limited by both the lower efficiency compared to rigid counterparts and the employment of costly materials. Among them, hole-transporting materials (HTM) represent the most expensive component and also a weak spot for long-term stability, due to poor resistance against heat and moisture. Here, we propose poly-3-hexylthiophene (P3HT)-modified HTMs embodying benzothiadiazole (BTD) moieties as electron-poor host. BTD is inserted along P3HT backbone, creating a donor-acceptor system able to promote the charge mobility throughout the HTM. A first series of copolymers, synthetized by Stille coupling, shows a decrease of benzothiadiazole/thiophene ratio (1:2, 1:4, 1:6), allowing to modulate both electronic and optical properties. Additionally, a greener approach (Kumada polycondensation) is employed to synthetize a homologous copolymer (VI-LM-027) embodying a lower amount of BTD that, used as HTM in f-PSCs, leads to power conversion efficiency comparable to commercially available P3HT and shows improved stability under continuous illumination. Finally, VI-LM-027 is also employed in 6 × 6 cm2 modules, delivering 6.9% efficiency on 16 cm2 of active area and demonstrating the feasibility of the proposed HTMs for large area manufacture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. High‐performance flexible perovskite solar cells via precise control of electron transport layer10.1002/aenm.201901419 ↗
2. NREL
3. Flexible high power-per-weight perovskite solar cells with chromium oxide-metal contacts for improved stability in air10.1038/nmat4388 ↗
4. Critical review of recent progress of flexible perovskite solar cells10.1016/j.mattod.2020.05.002 ↗
5. Beyond efficiency: the challenge of stability in mesoscopic perovskite solar cells10.1002/aenm.201501066 ↗
6. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
7. Enhancing thermal stability and lifetime of solid-state dye-sensitized solar cells via molecular engineering of the hole-transporting material spiro-OMeTAD10.1021/am5090385 ↗
8. Amorphous hole-transporting layer in slot-die coated perovskite solar cells10.1016/j.nanoen.2016.11.022 ↗
9. Solvent systems for industrial-scale processing of spiro-OMeTAD hole transport layer in perovskite solar sells10.1021/acsaem.8b01122 ↗
10. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
11. Current advancements on charge selective contact interfacial layers and electrodes in flexible hybrid perovskite photovoltaics10.1016/j.jechem.2020.05.050 ↗
12. Recent progress in high‐efficiency planar‐structure perovskite solar cells10.1002/eem2.12042 ↗
13. Light-induced improvement of dopant-free PTAA on performance of inverted perovskite solar cells10.1016/j.solmat.2020.110606 ↗
14. A new polytriarylamine derivative for dopant-free high-efficiency perovskite solar cells10.1039/C9SE00448C ↗
15. The chemistry of conducting polythiophenes10.1002/(SICI)1521-4095(199801)10:2<93::AID-ADMA93>3.0.CO;2-F ↗
16. Conducting polymers and their applications10.2174/1877946811202030224 ↗
17. Stable and low-cost mesoscopic CH3NH3PbI2Br perovskite solar cells by using a thin poly(3-hexylthiophene) layer as a hole transporter10.1002/chem.201404427 ↗
18. Poly(3-hexylthiophene) (P3HT): fruit fly or outlier in organic solar cell research?10.1039/C6TA08317J ↗
19. Perovskite solar cells employing dopant-free organic hole transport materials with tunable energy levels10.1002/adma.201504293 ↗
20. Tolerance of perovskite solar cell to high-energy particle irradiations in Space environment10.1016/j.isci.2018.03.020 ↗
21. Fabrication of highly hydrophobic surfaces of conductive polythiophene10.1039/b309291g ↗
22. Doping strategy for efficient and stable triple cation hybrid perovskite solar cells and module based on poly(3‐hexylthiophene) hole transport layer10.1002/smll.201904399 ↗
23. P3HT with Zn(C6F5)2 as p-type dopant for the enhanced performance of planar perovskite solar cells10.1002/solr.201900340 ↗
24. Flexible and highly efficient perovskite solar cells with a large active area incorporating cobalt-doped poly(3-hexylthiophene) for enhanced open-circuit voltage10.1039/C7TA03541A ↗
25. Advances in synthetic methods for the preparation of poly(3- hexylthiophene) (P3HT)10.2174/1570178615666180322150512 ↗
26. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
27. A comparison between functions of carbon nanotube and reduced graphene oxide and respective ameliorated derivatives in perovskite solar cells10.1007/s13233-020-8054-8 ↗
28. Enhanced electrical conductivity of molecularly p-doped poly(3-hexylthiophene) through understanding the correlation with solid-state order10.1021/acs.macromol.7b00968 ↗
29. High efficiency CH3NH3PbI(3-x)Cl x perovskite solar cells with poly(3-hexylthiophene) hole transport layer10.1016/j.jpowsour.2013.11.053 ↗
30. Alternating copolymers based on 2,1,3-benzothiadiazole and hexylthiophene: positioning effect of hexyl chains on the photophysical and electrochemical properties10.1002/ejoc.201100182 ↗
31. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
32. N-channel semiconductor materials design for organic complementary circuits10.1021/ar200006r ↗
33. Kumada catalyst-transfer polycondensation: mechanism, opportunities, and challenges10.1002/marc.201100316 ↗
34. High-efficiency perovskite solar cell based on poly(3-hexylthiophene): influence of molecular weight and mesoscopic scaffold layer10.1002/cssc.201700635 ↗
35. Nanostructure dependence of field-effect mobility in regioregular poly(3-hexylthiophene) thin film field effect transistors10.1021/ja055192i ↗
36. Synthesis of benzothiadiazole derivatives by applying C-C cross-couplings10.1021/acs.joc.5b02689 ↗
37. Controlled synthesis of high molecular weight poly(3-hexylthiophene)s via Kumada catalyst transfer polycondensation with Ni(IPr)(acac)2 as the catalyst10.1039/C4CC08012B ↗
38. Toxicity and speciation analysis of organotin compounds10.3184/095422912X13491962881734 ↗
39. Studies on the toxicity of alkyl tin compounds10.1111/j.1476-5381.1955.tb00053.x ↗
40. Synthesis of poly(3-hexylthiophene) with high molecular weight and small polydispersity
41. An unsaturated nickel(0) NHC catalyst: facile preparation and structure of Ni(0)(NHC)2, featuring a reduction process from Ni(II)(NHC)(acac) 210.1021/om800488x ↗
42. High efficiency and low efficiency roll-off hole-transporting layer-free solution-processed fluorescent NIR-OLEDs based on oligothiophene-benzothiadiazole derivatives10.1039/D0TC00450B ↗
43. Effect of fluorine substituents on benzothiadiazole-based D-π-A′-π-A photosensitizers for dye-sensitized solar cells10.1039/C9RA09693K ↗
44. Fused benzothiadiazole: a building block for n‐type organic acceptor to achieve high‐performance organic solar cells10.1002/adma.201807577 ↗
45. D-A copolymer with high ambipolar mobilities based on dithienothiophene and diketopyrrolopyrrole for polymer solar cells and organic field-effect transistors10.1016/j.orgel.2015.07.003 ↗
46. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
47. Mccullough · 1993
48. Effect of molecular weight on spectroscopic and spectroelectrochemical properties of regioregular poly(3-hexylthiophene)10.1021/ma970627a ↗
49. Inducing planarity in redox-active conjugated polymers with solubilizing 3,6-dialkoxy-thieno[3,2-b]thiophenes (DOTTs) for redox and solid-state conductivity applications10.1039/D0TC00914H ↗
50. Automated scalable spray coating of SnO2 for the fabrication of low-temperature perovskite solar cells and modules10.1002/ente.201901284 ↗