journal article·2021-12

Investigation of thermal performance and energy conversion in a novel planar micro-combustor with four-corner entrances for thermo-photovoltaic power generators

Xiao Yang, Bo Yu, Xianyong Peng, Huaichun Zhou

Publisher page

Abstract

Abstract A novel planar micro-combustor with four-corner entrances is proposed by considering high and uniform outer wall temperature distribution used in micro thermo-photovoltaic generator. For this, a three-dimensional numerical model with detailed chemical mechanism, transport, and heat transfer and a thermo-photovoltaic energy conversion model are developed to examine its performance. Results show that the proposed micro-combustor has excellent wall temperature uniformity because a uniform distribution of high-temperature zones of four individual flames is formed in the combustion chamber. Thermal performance and energy efficiency of the proposed micro-combustor are better than conventional micro-combustor at a low flow rate (m) and large equivalence ratio (φ). Additionally, the implemented plate-insertion strategy effectively overcome the deterioration of combustor performance under higher m or lower φ. Proposed micro-combustor with plates insertion has the largest wall temperature and energy efficiency, no matter what φ and m are adopted. Plates extend the fluid ravel path and produce some recirculation zones, which promotes heat transfer, preferential diffusion, and flame anchoring, while its pressure loss is larger. Of all the tested cases, the system efficiency reaches a maximum of 6.39%, corresponding to 12.1 W electricity output. This work provides effective combustor design and research insights to develop high-efficiency micro-power system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Combustion and flame dynamics · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Microscale combustion: technology development and fundamental research10.1016/j.pecs.2011.03.001 ↗
2. Miniature self-powering and self-aspirating combustion-powered thermoelectric generator burning gas fuels for combined heat and power supply
3. Numerical investigations on the emitter power and energy conversion efficiency improvement of micro‐cylindrical combustor by an internal spiral fin for micro‐thermophotovoltaic systems10.1002/er.6405 ↗
4. Toward high-energy-density, high-efficiency, and moderate-temperature chip-scale thermophotovoltaics10.1073/pnas.1301004110 ↗
5. The development of a micropower (micro-thermophotovoltaic) device10.1016/j.jpowsour.2006.12.006 ↗
6. Flame stabilization and emission of small Swiss-roll combustors as heaters10.1016/j.combustflame.2005.01.006 ↗
7. Experimental study on premixed CH4/air mixture combustion in micro Swiss-roll combustors10.1016/j.combustflame.2010.07.014 ↗
8. A computational fluid dynamics study of propane/air microflame stability in a heat recirculation reactor10.1016/j.combustflame.2007.09.009 ↗
9. Impacts of inner/outer reactor heat recirculation on the characteristic of micro-scale combustion system10.1016/j.enconman.2015.07.056 ↗
10. Effects of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium10.1016/j.proci.2018.06.023 ↗
11. Effects of porosity and multilayers of porous medium on the hydrogen-fueled combustion and micro-thermophotovoltaic10.1016/j.renene.2021.04.108 ↗
12. Recent progress in flame stabilization technologies for combustion-based micro energy and power systems10.1016/j.fuel.2020.119391 ↗
13. Enhancement of hydrogen combustion efficiency by helium dilution in a micro-combustor with wall cavities10.1016/j.cep.2018.06.014 ↗
14. Bluff-body effect on thermal and NO emission characteristics in a micro-planar combustor fueled with premixed ammonia-oxygen10.1016/j.cep.2020.107979 ↗
15. Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame10.1016/j.cej.2015.04.011 ↗
16. Flame stability analysis of premixed hydrogen/air mixtures in a swirl micro-combustor10.1016/j.energy.2020.118495 ↗
17. Comparative study of combustion and thermal performance in a swirling micro combustor under premixed and non-premixed modes10.1016/j.applthermaleng.2019.114110 ↗
18. Combustion in micro-cylindrical combustors with and without a backward facing step10.1016/S1359-4311(02)00113-8 ↗
19. Towards the development of a high power density, high efficiency, micro power generator10.1016/j.apenergy.2019.114386 ↗
20. Microcombustion for micro-tubular flame-assisted fuel cell power and heat cogeneration10.1016/j.jpowsour.2018.12.043 ↗
21. Investigation of microcombustion reforming of ethane/air and micro-Tubular Solid Oxide Fuel Cells
22. Heterogeneous reaction and homogeneous flame coupled combustion behavior of n-decane in a partially packed catalytic bed combustor10.1016/j.fuel.2020.120042 ↗
23. Effect of a catalytic segment on flame stability in a micro combustor with controlled wall temperature profile10.1016/j.energy.2018.09.120 ↗
24. Effects of products from heterogeneous reactions on homogeneous combustion for H2/O2 mixture in the micro combustor10.1016/j.applthermaleng.2016.04.052 ↗
25. OH-PLIF investigation of Y2O3-ZrO2 coating improving flame stability in a narrow channel10.1016/j.cej.2020.126708 ↗
26. Effect of dimethyl ether addition on flame stability of premixed methane/air in a micro-planar quartz combustor10.1016/j.cep.2019.107740 ↗
27. Enhancement of thermal performance by converging-diverging channel in a micro tube combustor fueled by premixed hydrogen/air10.1016/j.ijhydene.2018.10.239 ↗
28. Thermal performances and emitter efficiency improvement studies on premixed micro-combustors with different geometric shapes for thermophotovoltaics applications10.1016/j.energy.2021.120298 ↗
29. Numerical study of hydrogen-air combustion characteristics in a novel micro-thermophotovoltaic power generator10.1016/j.apenergy.2017.05.027 ↗
30. Investigation of combustion and emission performance of a micro combustor: effects of bluff body insertion and oxygen enriched combustion conditions10.1016/j.ijhydene.2019.08.045 ↗
31. Heat transfer enhancement and exergy efficiency improvement of a micro combustor with internal spiral fins for thermophotovoltaic systems10.1016/j.applthermaleng.2021.116723 ↗
32. The effect of embedded high thermal conductivity material on combustion performance of catalytic micro combustor10.1016/j.enconman.2018.08.085 ↗
33. Parametric analysis on the combustion and thermal performance of a swirl micro-combustor for micro thermophotovoltaic system10.1016/j.energy.2020.117312 ↗
34. Study of catalytic combustion and its effect on microthermophotovoltaic power generators10.1088/0022-3727/38/23/018 ↗
35. Effect analysis on energy conversion enhancement and NOx emission reduction of ammonia/hydrogen fuelled wavy micro-combustor for micro-thermophotovoltaic application10.1016/j.fuel.2020.119755 ↗
36. Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor10.1016/j.ces.2015.03.030 ↗
37. Development of a prototype micro-thermophotovoltaic power generator10.1088/0022-3727/37/7/011 ↗
38. Thermophotovoltaic power conversion using a superadiabatic radiant burner10.1016/j.apenergy.2017.08.168 ↗
39. Numerical study on energy conversion performance of micro-thermophotovoltaic system adopting a heat recirculation micro-combustor10.1016/j.fuproc.2018.07.034 ↗
40. Thermal performance and NOx emission characteristics studies on a premixed methane-ammonia-fueled micro-planar combustor10.1016/j.fuel.2021.120190 ↗
41. Combustion process and entropy generation in a novel microcombustor with a block insert10.1016/j.cej.2015.04.034 ↗
42. McGee · 1991
43. Numerical modeling of non-adiabatic heat-recirculating combustors10.1016/j.proci.2006.08.082 ↗
44. Energy conversion efficiency improvement studies on unconventional premixed micro-combustors partially inserted with porous medium10.1016/j.fuproc.2021.106774 ↗
45. An improved H2/O2 mechanism based on recent shock tube/laser absorption measurements10.1016/j.combustflame.2010.10.002 ↗
46. A numerical study on premixed hydrogen/air flames in a narrow channel with thermally orthotropic walls10.1016/j.ijhydene.2019.11.230 ↗
47. A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application10.1016/j.apenergy.2015.04.068 ↗
48. Investigation of heat transfer characteristics of hydrogen combustion process in cylindrical combustors from microscale to mesoscale10.1016/j.ijhydene.2021.05.099 ↗
49. Incropera · 2007
50. Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications10.1016/j.energy.2021.120098 ↗
51. Ultraefficient thermophotovoltaic power conversion by band-edge spectral filtering10.1073/pnas.1903001116 ↗
52. The development of a wideband and angle-insensitive metamaterial filter with extraordinary infrared transmission for micro-thermophotovoltaics10.1039/C4TC02892A ↗
53. Cengel · 2002
54. Thermophotovoltaic energy conversion: analytical aspects, prototypes and experiences10.1016/j.apenergy.2013.08.064 ↗
55. Thermophotovoltaics: a potential pathway to high efficiency concentrated solar power10.1039/C6EE01372D ↗
56. Generation of electricity using InGaAsSb and GaSb TPV cells in combustion-driven radiant sources10.1016/j.solmat.2005.02.002 ↗
57. Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators10.1016/j.solmat.2009.11.015 ↗
58. Direct thermal to electrical energy conversion using very low bandgap TPV cells in a gas-fired furnace system10.1016/j.enconman.2013.12.017 ↗
59. Research on micro-thermophotovoltaic power generators10.1016/S0927-0248(03)00135-1 ↗
60. A comparative study on combustion characteristics of methane, propane and hydrogen fuels in a micro-combustor10.1016/j.ijhydene.2015.09.101 ↗
61. Stabilization of ultra-lean hydrogen enriched inverted flames behind a bluff–body and the phenomenon of anomalous blow–off10.1016/j.combustflame.2017.12.032 ↗
62. Laminar non-premixed flame patterns in compact micro disc-combustor with annular step and radial preheated channel10.1016/j.combustflame.2021.01.024 ↗
63. The anchoring mechanism of a bluff-body stabilized laminar premixed flame10.1016/j.combustflame.2014.02.005 ↗
64. The determination of pipe contraction pressure loss coefficients for incompressible turbulent flow10.1016/0142-727X(87)90008-7 ↗
65. Enhancing thermal, electrical efficiencies of a miniature combustion-driven thermophotovoltaic system10.1002/pip.905 ↗
66. Research on modular micro combustor-radiator with and without porous media10.1016/j.cej.2010.12.083 ↗
67. Measured and predicted performance of a micro-thermophotovoltaic device with a heat-recirculating micro-emitter10.1016/j.ijheatmasstransfer.2010.11.028 ↗
68. Performance of a micro-thermophotovoltaic power system using an ammonia-hydrogen blend-fueled micro-emitter10.1016/j.ijhydene.2013.05.010 ↗
69. Development of micro-thermophotovoltaic power generator with heat recuperation10.1016/j.enconman.2013.10.040 ↗
70. Enabling efficient heat-to-electricity generation at the mesoscale10.1039/C7EE00366H ↗
71. Numerical investigation of key parameters of the porous media combustion based Micro-Thermophotovoltaic system10.1016/j.energy.2018.05.151 ↗
72. Performance assessment of catalytic combustion-driven thermophotovoltaic platinum tubular reactor10.1016/j.apenergy.2017.11.095 ↗
73. A comprehensive experimental characterisation of a novel porous media combustion-based thermophotovoltaic system with controlled emission10.1016/j.apenergy.2019.113721 ↗
74. Effects of bluff-body on the thermal performance of micro thermophotovoltaic system based on porous media combustion10.1016/j.applthermaleng.2020.115281 ↗