journal article·2018-10

SnO2 nanorod arrays with tailored area density as efficient electron transport layers for perovskite solar cells

Xiaokun Zhang, Yichuan Rui, Yuanqiang Wang, Jingli Xu, Hongzhi Wang, Qinghong Zhang, Peter Müller-Buschbaum

Publisher page

Abstract

Abstract Tin dioxide (SnO2) is regarded as an effective electron transport material for attaining high-performance perovskite solar cells (PSCs). Herein, vertically aligned SnO2 nanorod arrays are grown directly on fluorine-doped tin oxide (FTO) substrates in an acidic solution via hydrothermal method, where the area density of the nanorod arrays is tailored by varying the precursor concentration. Particularly, the mean diameters of the nanorods increase from 15 to 25 nm and the corresponding area densities decrease from 660 to 460 μm−2 with increasing the concentration of tin(IV) chloride pentahydrate. X-ray diffraction and X-ray photoelectron spectroscopy measurements reveal that the nanorod arrays are pure tetragonal rutile SnO2 with a high degree of crystallinity. Mixed perovskites of (FAPbI3)0.85(MAPbBr3)0.15 are infiltrated into these SnO2 nanorod arrays, and the perovskite solar cells show an enhanced photovoltaic performance as compared to the nanoparticle counterpart. Perovskite solar cells based on SnO2 nanorod arrays with the optimized area density exhibit the best power conversion efficiency of 15.46% which is attributed to an accelerated electron transport and a decreased recombination rate at SnO2/perovskite interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
3. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
4. Capturing the sun: a review of the challenges and perspectives of perovskite solar cells10.1002/aenm.201700264 ↗
5. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
6. Efficient electron transfer layer based on Al2O3 passivated TiO2 nanorod arrays for high performance evaporation-route deposited FAPbI(3) perovskite solar cells10.1016/j.solmat.2017.05.072 ↗
7. Structure of organometal halide perovskite films as determined with grazing-incidence x-ray scattering methods10.1002/aenm.201700131 ↗
8. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
9. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
10. Hysteresis in organic-inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.06.025 ↗
11. Recent progress in stabilizing hybrid perovskites for solar cell applications10.1016/j.jpowsour.2017.04.025 ↗
12. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
13. 1-dimensional TiO2 nano-forests as photoanodes for efficient and stable perovskite solar cells fabrication10.1016/j.nanoen.2017.03.034 ↗
14. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer10.1021/nl400286w ↗
15. Synthesis of oriented TiO2 nanocones with fast charge transfer for perovskite solar cells10.1016/j.nanoen.2014.11.014 ↗
16. Investigation of high performance TiO2 nanorod array perovskite solar cells10.1039/C7TA03710D ↗
17. Efficient perovskite solar cells depending on TiO2 nanorod arrays10.1021/acsami.6b05971 ↗
18. Enhanced photovoltaic performance of perovskite solar cells based on Er-Yb co-doped TiO2 nanorod arrays10.1016/j.electacta.2017.06.032 ↗
19. Ultrathin atomic layer deposited TiO2 for surface passivation of hydrothermally grown 1D TiO2 nanorod arrays for efficient solid-state perovskite solar cells10.1021/cm504558g ↗
20. Enhancement of perovskite solar cells efficiency using n-doped TiO2 nanorod arrays as electron transfer layer10.1186/s11671-016-1811-0 ↗
21. Vertical TiO2 nanorods as a medium for stable and high-efficiency perovskite solar modules10.1021/acsnano.5b03265 ↗
22. Effects of interfacial characteristics on photovoltaic performance in CH3NH3PbBr3-based bulk perovskite solar cells with core/shell nanoarray as electron transporter10.1016/j.nanoen.2014.12.004 ↗
23. 11% efficient perovskite solar cell based on ZnO nanorods: an effective charge collection system10.1021/jp412407j ↗
24. Effects of seed layer on growth of ZnO nanorod and performance of perovskite solar cell10.1021/acs.jpcc.5b03276 ↗
25. Full coverage of perovskite layer onto ZnO nanorods via a modified sequential two-step deposition method for efficiency enhancement in perovskite solar cells10.1016/j.apsusc.2017.03.096 ↗
26. 16.1% efficient hysteresis-free mesostructured perovskite solar cells based on synergistically improved ZnO nanorod arrays10.1002/aenm.201500568 ↗
27. TiO2 passivation for improved efficiency and stability of ZnO nanorods based perovskite solar cells10.1039/C6RA12126H ↗
28. Facile fabrication of SnO2 nanorod arrays films as electron transporting layer for perovskite solar cells10.1002/solr.201800133 ↗
29. A novel conductive mesoporous layer with a dynamic two-step deposition strategy boosts efficiency of perovskite solar cells to 20%10.1002/adma.201801935 ↗
30. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
31. Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells10.1039/C5TA01207D ↗
32. Insight into perovskite solar cells based on SnO2 compact electron-selective layer10.1021/acs.jpcc.5b00541 ↗
33. Enhanced efficiency and stability of inverted perovskite solar cells using highly crystalline SnO2 nanocrystals as the robust electron-transporting layer10.1002/adma.201600619 ↗
34. Low-temperature electrodeposited crystalline SnO2 as an efficient electron transporting layer for conventional perovskite solar cells10.1016/j.solmat.2017.02.008 ↗
35. An efficient electron transport material of tin oxide for planar structure perovskite solar cells10.1016/j.jpowsour.2016.01.044 ↗
36. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
37. Mesoporous SnO2 electron selective contact enables UV-stable perovskite solar cells10.1016/j.nanoen.2016.10.055 ↗
38. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
39. Large-scale, solution-phase growth of single-crystalline SnO2 nanorods10.1021/ja0493244 ↗
40. Highly ordered SnO2 nanorod arrays from controlled aqueous growth10.1002/anie.200454000 ↗
41. V-shaped tin oxide nanostructures featuring a broad photocurrent signal: an effective visible-light-driven photocatalyst10.1002/smll.200600216 ↗
42. Ultrathin SnO2 nanorods: template- and surfactant-free solution phase synthesis, growth mechanism, optical, gas-sensing, and surface adsorption properties10.1021/ic902131a ↗
43. Synthesis, characterization and photocatalysis of SnO2 nanorods with large aspect ratios10.1016/j.matlet.2011.07.036 ↗
44. Interfacial hydrothermal synthesis of SnO2 nanorods towards photocatalytic degradation of methyl orange10.1016/j.materresbull.2014.08.006 ↗
45. Hydrothermal preparation and photoelectrochemical performance of size-controlled SnO2 nanorod arrays10.1039/c0ce00201a ↗
46. Enhancing the solar cell efficiency through pristine 1-dimensional SnO2 nanostructures: comparison of charge transport and Carrier lifetime of SnO2 particles vs10.1016/j.electacta.2012.04.016 ↗
47. Enhancement of photovoltaic performance of dye-sensitized solar cells by modifying tin oxide nanorods with titanium oxide layer10.1021/jp309193n ↗
48. Liquid-liquid interface assisted synthesis of SnO2 nanorods with tunable length for enhanced performance in dye-sensitized solar cells10.1016/j.electacta.2017.01.004 ↗
49. Antimony-doped tin oxide nanorods as a transparent conducting electrode for enhancing photoelectrochemical oxidation of water by hematite10.1021/am405628r ↗
50. Hydrophobic coating over a CH3NH3PbI3 absorbing layer towards air stable perovskite solar cells10.1039/C6TC02238C ↗
51. Effects of copper addition on photovoltaic properties of perovskite CH3NH3PbI3-xClx solar cells10.1002/pssa.201700268 ↗
52. Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer10.1016/j.nanoen.2014.12.022 ↗
53. Discontinuous SnO2 derived blended-interfacial-layer in mesoscopic perovskite solar cells: minimizing electron transfer resistance and improving stability10.1016/j.nanoen.2017.05.058 ↗
54. Reducing hysteresis and enhancing performance of perovskite solar cells using low-temperature processed Y-doped SnO₂ nanosheets as electron selective layers10.1002/smll.201601769 ↗
55. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗
56. E-beam evaporated Nb2O5 as an effective electron transport layer for large flexible perovskite solar cells10.1016/j.nanoen.2017.04.010 ↗
57. Impact of a mesoporous titania-perovskite interface on the performance of hybrid organic-inorganic perovskite solar cells10.1021/acs.jpclett.6b01617 ↗