journal article·2019-04

Electrical properties of proton-conducting BaCe0.8Y0.2O3-δ and the effects of bromine addition

Ángel Triviño-Peláez, Domingo Pérez-Coll, Glenn C. Mather

Acta Materialia· Volume 167
Publisher page

Abstract

[EN] A detailed analysis of the electrical properties of the proton-conducting BaCeYO phase (BCY20) and the effects of Br doping has been undertaken. Members of the system of nominal stoichiometry BaCeYOBr (x = 0, 0.05, 0.1 and 0.2) were synthesised by a citrate-nitrate process and high-temperature annealing up to 1500 °C. X-ray diffraction revealed the formation of single-phase material with a monoclinically distorted perovskite structure (space group I2/m) with greater distortion for Br-synthesised phase. Significant contrasts in electrical behaviour and stability between BCY20 and Br-synthesised series members were also found. However, chemical analysis by total X-ray fluorescence spectroscopy indicated that only trace amounts of Br remain after synthesis, indicating that Br addition influences stoichiometry but not directly the physicochemical properties. Higher conductivity is observed for the Br-synthesised compositions in wet and dry oxidising conditions in the temperature range 300–900 °C, reaching a value of 5.8 S m at 800 °C for the x = 0.2 member in wet O (pHO ∼ 0.022 atm). Determination of partial-conductivity components indicated that, in humid conditions and low temperature, the conductivity of 20% Br-synthesised material is principally protonic (t = 0.91 at 600 °C and pO = 0.2 atm) and superior to that of BCY20. Mixed oxide-ionic-electronic conductivity dominates at high pO (1 atm) and oxide-ionic conductivity at low pO (∼10 atm) in the temperature range 600–900 °C for both BCY and Br-doped samples. Stability was found to be poorer in CO for the Br-synthesised phases as determined by thermogravimetry and prolonged conductivity measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Prospect of hydrogen technology using proton-conducting ceramics10.1016/j.ssi.2003.03.001 ↗
2. Towards the next generation of solid oxide fuel cells operating below 600 °C with chemically stable proton-conducting electrolytes10.1002/adma.201103102 ↗
3. Intermediate temperature steam electrolysis using strontium zirconate-based protonic conductors10.1016/j.ijhydene.2008.10.011 ↗
4. Hydrogen separation from syngas using high-temperature proton conductors10.1007/s11581-007-0080-4 ↗
5. Electrochemical reduction of CO2 in a proton conducting solid oxide electrolyser10.1039/C0JM02205E ↗
6. Direct conversion of methane to aromatics in a catalytic co-ionic membrane reactor10.1126/science.aag0274 ↗
7. Synthesis of strontium and barium cerate and their reaction with carbon dioxide10.1016/0167-2738(93)90338-4 ↗
8. Temperature dependence of partial conductivities of the BaZr0.7Ce0.2Y0.1O3-δ proton conductor10.1016/j.jpowsour.2017.08.011 ↗
9. Ammonia synthesis at atmospheric pressure in a BaCe0.2Zr0.7Y0.1O2.9 solid electrolyte cell10.1016/j.ssi.2015.01.002 ↗
10. Sintering properties of trivalent cation-doped barium zirconate at 1600°C10.1149/1.2766530 ↗
11. Improving the chemical stability of BaCe0.8Sm0.2O3-δ electrolyte by Cl doping for proton-conducting solid oxide fuel cell10.1016/j.elecom.2012.12.012 ↗
12. Effect of fluorine, chlorine and bromine doping on the properties of gadolinium doped barium cerate electrolytes10.1016/j.ijhydene.2015.05.040 ↗
13. The effect of F-doping on the conductivity of proton conductor Ba4Ca2Nb2O1110.1016/j.electacta.2016.02.052 ↗
14. Novel fluoride-doped barium cerate applied as stable electrolyte in proton conducting solid oxide fuel cells10.1016/j.jeurceramsoc.2015.05.016 ↗
15. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
16. Determination of the Ta and Nb ratio in LiNb1-xTaxO3 by total reflection X-ray fluorescence spectrometry10.1016/j.sab.2004.11.014 ↗
17. Effect of modulation of the particle size distributions in the direct solid analysis by total-reflection X-ray fluorescence10.1016/j.sab.2017.12.007 ↗
18. Modeling of electrical conductivity in high-temperature proton- conducting oxides10.1016/S0167-2738(98)00138-6 ↗
19. Theoretical behaviour of concentration cells based on ABO3 perovskite materials with protonic and oxygen ion conduction10.1016/0167-2738(95)00008-T ↗
20. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
21. Phase transitions, chemical expansion and deuteron sites in the BaZr0.7Ce0.2Y0.1O3-δ proton conductor10.1021/acs.chemmater.6b01095 ↗
22. Correlation between thermal properties, electrical conductivity, and crystal structure in the BaCe0.80Y0.20O2.9 proton conductor10.1021/cm7033917 ↗
23. Rietveld refinement guidelines10.1107/S0021889898009856 ↗
24. A-site-cation deficiency in the SrCe0.9Yb0.1O3−δ perovskite: effects of charge-compensation mechanism on structure and proton conductivity10.1039/c0jm04464d ↗
25. Effect of sintering conditions on the electrical-transport properties of the SrZrO3-based protonic ceramic electrolyser membrane10.1016/j.jpowsour.2016.09.075 ↗
26. Partial conductivities of mixed conducting BaCe0.65Zr0.2Y0.15O3–δ10.1016/j.ijhydene.2010.07.122 ↗
27. Defect structure and n-type electrical properties of SrCe0.95Eu0.05O3−δ10.1149/1.1614796 ↗
28. Ionic conduction and nonstoichiometry in BaxCe0.9Y0.1O3-α10.1016/S0167-2738(98)00130-1 ↗
29. Manipulation of nanoscale intergranular phases for high proton conduction and decomposition tolerance in BaCeO3 polycrystals10.1021/acs.nanolett.7b04655 ↗
30. Thermodynamic regularities in perovskite and K2NiF4 compounds10.1111/j.1151-2916.1989.tb05971.x ↗
31. Transport properties and in-situ Raman spectroscopy study of BaCe0.9Y0.1O3-δ as a function of water partial pressures10.1016/j.ssi.2011.03.020 ↗
32. Defect structure analysis of B-site doped perovskite-type proton conducting oxide BaCeO3. Part 2: the electrical conductivity and diffusion coefficient of BaCe0.9Y0.1O3-δ10.1016/j.ssi.2008.08.005 ↗
33. Partial conductivities in BaCe0.9Y0.1O3-δ by imedpoance spectroscopy
34. Transport properties of BaCe0.95Y0.05O3−α mixed conductors for hydrogen separation10.1016/S0167-2738(97)00320-2 ↗
35. Effect of ionic radii of dopants on mixed ionic conduction (H++O2-) in BaCeO3-based electrolytes10.1016/0167-2738(94)90321-2 ↗